• Smart Media Journal
• /
• v.6 no.3
• /
• pp.89-94
• /
• 2017

The existing geofences provide only context-awareness service for entering or leaving the set region when a user sets a virtual region for his/her PoI(Point of Interest). Applying the mobile-geofence technology to the connected car technology, which is attracting attention as a next generation technology, it is possible to provide application service without additional infrastructure construction cost However, to do this, we need to expand and improve the functions of traditional geofence. In this paper, we propose and implement a flexible mobile-geofence in which the radii of each geofence applied to vehicles is changed according to context-aware in order to support connected cars technology based on the previously studied mobile three-dimensional geofence system. The proposed flexible mobile-geofence shows experimentally that the region of the geofence is changed according to context-aware of itself and its surroundings after applying a flexible decision algorithm by the flexible factor analysis. In the future, we are expected that the flexible mobile-geofence proposed in this paper will be applied not only to connected-cars technology but also to the application technology of V2X(Vehicle to Everything) for safe and efficient vehicle operation.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.213-222
• /
• 2017

Heat treatment of wood is an attractive alternative environmentally-friendly treatment to add value of less valuable woods by improving color, dimensional stability, and natural durability. To improve the color properties of Korean white pine (Pinus koraiensis) and royal paulownia (Pauwlonia tomentosa), we treated the woods at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$, and $220^{\circ}C$ for 2 hours. Color change after heat treatment was evaluated using the CIE-Lab color system and survey was conducted to determine the consumer preferences towards color of heat-treated wood. Lightness ($L^*$) decreased with increasing temperature and the higher degree of change was obtained in royal paulownia. The red/green chromaticity ($a^*$) in both wood decreased after heat treatment at $160^{\circ}C$, and constantly increased after heat treatment at $180^{\circ}C$ to $220^{\circ}C$. Yellow/blue chromaticity ($b^*$) in Korean white pine tended to increase after heat treatment at $160^{\circ}C$, then decreased gradually afterwards. In royal paulownia, $b^*$ values linearly increased with increasing temperature. Overall color change (${\Delta}E^*$) increased with increasing temperature with higher degree obtained in royal paulownia. Samples with the clamps in both wood species showed lower degree of the change in $L^*$, $a^*$, b and ${\Delta}E^*$. The results of the consumer preferences test showed that the darker colors of heat-treated woods were more preferred by consumers compared to the lighter colors of untreated woods. Consequently, heat treatment could enhance the color properties of Korean white pine and royal paulownia woods for value added products.

• Journal of Korea Water Resources Association
• /
• v.50 no.3
• /
• pp.169-179
• /
• 2017

Recently, due to global warming and climate change in Korea, local heavy storm occurs frequently. In this study, the risky areas for flooding in urban areas are analyzed for flood inundation based on two-dimensional urban flood runoff model (XP-SWMM) focusing on coastal high flood-risk urban areas. In addition, the MCDM (Multi-Criteria Decision Making) technique is utilized in order to establish the flood defense structural measures. The alternative flood reduction method are compared and the optimum flood defense measures are selected. A simulation model was used with three structural flood prevention measures (drainage pipe construction, water detention, flood pumping station). In order to decrease the flooding area, flood assessment criteria are suggested (flooded area, maximum inundation depth, damaged residential area, construction cost). Priorities of alternatives are determined by using compromise programming. As a result, the optimal flood defence alternative suggested for Janghang Zone 1 is flood pumping station and for Janghang Zone 2, 3 are drainage pipe construction.

• Radiation Oncology Journal
• /
• v.38 no.2
• /
• pp.119-128
• /
• 2020

Purpose: Colorectal cancer is becoming an increasing concern in the middle-aged population of Iran. This study aimed to compare the preliminary results of short-course and long-course neoadjuvant chemoradiotherapy treatment for rectal cancer patients. Materials and Methods: In this clinical trial we recruited patients with rectal adenocarcinoma located from 5 cm to 15 cm above the anal verge. Patients in group I (short-course) received three-dimensional conformational radiotherapy with a dose of 25 Gy/5 fractions in 1 week plus concurrent XELOX regimen (capecitabine 625 mg/㎡ from day 1-5 twice daily and oxaliplatin 50 mg/㎡ on day 1 once daily). Patients in group II (long-course) received a total dose of 50-50.4 Gy/25-28 fractions for 5 to 5.5 weeks plus capecitabine 825 mg/㎡ twice daily. Both groups underwent consolidation chemotherapy followed by delayed surgery at least 8 weeks after radiotherapy completion. The pathological response was assessed with tumor regression grade. Results: In this preliminary report on complications and pathological response, 66 patients were randomized into two study groups. Mean duration of radiotherapy in the group II (long-course) was 5 ± 1 days (range, 5 to 8 days) and 38 ± 6 days (range, 30 to 58 days). The median follow-up was 18 months. Pathological complete response was achieved in 32.3% and 23.1% of patients in the shortcourse and long-course groups, respectively (p = 0.558). Overall, acute grade 3 or higher treatment-related toxicities occurred in 24.2% and 22.2% of patients in group I and II, respectively (p = 0.551). No acute grade 4 or 5 adverse events were observed in either group except one grade 4 hematologic toxicity that was seen in group II. Within one month of surgery, no significant difference was seen regarding grade ≥3 postoperative complications (p = 0.333). Conclusion: For patients with rectal cancer located at least 5 cm above the anal verge, short-course radiotherapy with concurrent and consolidation chemotherapy and delayed surgery is not different in terms of acute toxicity, postoperative morbidity, complete resection, and pathological response compared to long-course chemoradiotherapy.

• Journal of Life Science
• /
• v.17 no.5 s.85
• /
• pp.723-727
• /
• 2007

Resistance to metronidazole in Helicobacter pylori results from inactivation of rdxA and frxA, the chromosomal genes for a nitroreductase that normally converts metronidazole from prodrug to bactericidal agent. Two types of metronidazole susceptible strains had been found distinguishable by their apparent levels of frxA expression. Most common in the populations we had studied were strains that required only rdxA inactivation to become resistant to moderate levels of metronidazole(type I strains). The second strain type required inactivation of both frxA and rdxA to become resistance to metronidazole(type II strains): this was linked to a relatively high level of frxA gene transcription in the type II strains. The fdxA gene regulated fdxA as well as rdxA gene. Thus, to study the function of fdxA as a regulatory gene we constructed a null mutant of fdxA in H. pylori genome and identified over-and under-expressed proteins by fdxA using two-dimensional(2-D) electrophoresis and MALDI-TOP-MS. There were four over-expressed proteins in fdxA mutant; nifU-like protein(HP0221), frxA(HP0642), nonheme ferritin(HP0653), and hypothetical protein(HP0902). Three under-expressed proteins were also identified in fdxA mutant, including 5'-methylthioadenosine/S-adenosylhomocysteine nucleosidase (HP0089), (3R)-hydroxymyristoyl ACP dehydratase(HP1376), and thioredoxin(HP1458).

• Korean Journal of Head & Neck Oncology
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2003

Background and Objectives: Surgical ablation of tumors in the oral cavity and the oropharynx results in a three dimensional defect because of the needs to resect the adjacent area for the surgical margin. Although a variety of techniques are available, radial forearm free flap has been known as an effective method for this defect, which offers a thin, pliable, and relatively hairless skin and a long vascular pedicle. We report the clinical results of our 54 consecutive radial forearm free flaps used for oral cavity and oropharynx cancers. Materials and Methods: We reviewed the medical records of patients who were offered intraoral reconstruction with a radial forearm free flap after ablative surgery for oral cavity and oropharyngeal cancers from August 1994 to February 2003 and analyzed surgical methods, flap survival rate, complication, and functional results. Among these, 20 cases were examined with modified barium swallow to evaluate postoperative swallowing function and other 8 cases with articulation and resonance test for speech. We examined recovery of sensation with two-point discrimination test in 15 cases who were offered sensate flaps. Results: The primary sites were as follows : mobile tongue (18), tonsil (17), floor of mouth (4), base of tongue (2), soft palate (2), retromolar trigone (3), buccal mucosa (1), oro-hypopharynx (6), and lower lip (1). The paddles of flaps were tailored in multilobed designs from oval shape to tetralobed design and in variable size according to the defects after ablation. This procedures resulted in satisfactory flap success rate (96.3%) and showed good swallowing function and social speech. Eight of 15 cases (53.3%) who had offered sensate flap showed recovery of sensation between 1 and 6 postoperative months (average 2.6 month). Conclusion: The reconstruction with radial forearm free flap might be an excellent method for the maximal functional results after ablative surgery of oral cavity and oropharyngeal cancers that results in multidimensional defect.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.105-110
• /
• 2007

Extraction characteristics of onion (Allium cepa) and the functional properties of corresponding extracts were monitored by the response surface methodology (RSM). The maximum extraction yield of 44.02% was obtained under the specific extraction conditions, such as microwave power of 143.13 W, ethanol concentration of 61.77% and extraction time of 3.39 min. The maximum electron donating ability (EDA) was found as 45.85% at the conditions of 143.55 W microwave power, 27.52% ethanol concentration and 4.86 min extraction time. The maximum inhibitory effect on tyrosinase was 65.40% at 132.29 W, 36.47% and 7.62 min. The maximum superoxide dismutase (SOD)-like activity was 69.84% under the extraction conditions of 99.41 W, 8.47% and 7.13 min. Based on superimposition of four dimensional RSM with respect to extraction yield, electron donating ability and SOD-like activity obtained under the various extraction conditions, the optimum ranges of extraction conditions were found to be microwave power of 0$\sim$120 W, ethanol concentration of 70$\sim$80% and extraction time of 2$\sim$10 min.

• Korean Journal of Social Welfare Studies
• /
• v.48 no.2
• /
• pp.143-171
• /
• 2017

Along with the well-established evidence on the negative effect of social isolation on physical mental health and mortality, increasing attention has been paid to multi-dimensional nature of social isolation. In this study, the main effect and interaction effect of objective and subjective social isolation on heterogeneous age cohort related to the onset of dementia, which is becoming a social problem due to rapid aging of health issues, was examined through binary logistic regression analysis. Data came from the first wave of Korean Social Life, Health and Aging Project (KSHAP) (N= 814). Findings showed 1) in the young-old, objective isolation was a significant on the incidence of dementia, 2) in the old-old, subjective isolation increased the risk of dementia. In summary, the relative influence of objective and subjective social isolation related to the incidence of dementia varies depending on the young-old and old-old. On the other hand, the interaction effect of objective and subjective social isolation on dementia was not significant in both the young-old and old-old. Based on the findings, we discussed implications and suggestions for future research and relevant policy and program development(dementia-friendly communities) for ameliorating objective and subjective social isolation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.939-944
• /
• 2018

Clean fire extinguishing agents refer to chemical that can replace Halon 1211 and Halon 1310 according to the Montreal Protocol fermented to protect the Earth's ozone layer. In Korea and abroad, system standardization and performance evaluation of clean fire extinguishing agents are being carried out. This paper proposes an optimal nozzle shape by modeling and numerical analysis of various nozzle shapes based on general clean fire extinguishing system. The ejection speed of the nozzle can be improved by studying three - dimensional modeling of the nozzle for two shapes, Type A and B. Flow analysis was performed on the two types of nozzles and the gas velocity and pressure distribution were measured with different nozzle diameters. It was confirmed that the jetting speed was changed at the nozzle outlet according to the number and diameter of the nozzle holes. The flow rate increased with increasing the pressure regardless of the nozzle hole diameter. Based on the results obtained from the experiment, the K-factor value was deduced. Finally, a nozzle with a 12-hole structure with a 5-mm nozzle hole was proposed.