• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.961-966
• /
• 2003

In recent, the design of diaphragm which is representative disturbed region in PSC box girder bridge have been performed according to the empirical method or beam theory. But, these methods couldn't be described the behavior of the end diaphragm, and placed reinforcements accurately. As the compressive stress transferred by the web concentrated on the lower parts of diaphragm, it was demonstrated that the basic assumption of 2-D strut-and-tie model for the diaphragm that the compressive stress acts on the upper parts of the diaphragm is wrong. Meanwhile, in this research, after analyzing the variables of end diaphragm, the 2-D strut-and-tie models appropriate to each cases are proposed. And, the problems of 2-D strut-and-tie model were analyzed, so 3-D strut-and-tie model is proposed as well. There is no codes which include the demonstration of safety of 3-D strut-and-tie model. Hence, for nodes, the stresses at the elements which included the singular node in strut-and-tie model were investigated using the finite element analysis. And, the stress states of strut has one direction, so effective stresses were considered at the stage, dimensioning of the model. From the results, 3-D strut-and-tie model could predict the behavior of end diaphragm accurately, and design of reinforcement could be performed economically.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.602-607
• /
• 2002

본 논문에서는 효율적인 압축 기법과 멀티미디어를 위한 다 해상도 3D 얼굴 모델 전송, 그리고 저비트율 응용에 대해 제안하고자 한다. 일반적으로 얼굴 모델은 3D 레이저 디지타이저에 의해서 얻어지게 되고 애니메이션, 비디오게임, 비디오 회의와 같은 응용 범위에 따라 여러 해상도로 재양자화 되어진다. 3D 디지털화된 얼굴 모델을 정합하고 재양자화 하기 위해서 2D 템플릿을 변형함으로써 압축 모델을 얻을 수 있다. 현재까지의 연구에서 다섯 가지 해상도로 계층적 2D 얼굴 와이어프레임 템플릿을 만들었다. 변형 과정에서 2D 템플릿은 얼굴 특징점과 제안된 PCAT(piecewise chainlet affine transformation)에 의해 바뀌게 된다. 재양자화된 후 3D 디지털화된 모델은 인지하지 못할 정도로 손실이 줄어들게 된다. 더욱이, 본 논문에서 제안한 계층적 데이터 구조를 갖는 다 해상도 얼굴모델은 통신망에서 점진적으로 알려지고 사용되어질 것이다.

• 한국멀티미디어학회논문지
• /
• 제3권6호
• /
• pp.566-574
• /
• 2000

HMM이 시계열 모델로써 우수함이 널리 입증되면서 이차원 모델로 확장해 보려는 연구 결과도 늘어났지만 아직까지 임의의 객 체 패턴의 다양한 변형을 모델링하기에는 너무 단순한 경우가 대부분이다. 따라서 HMM이 시계열 데이터에서 보여준 성과를 영상 데이터에서 기대하기는 어렵다. 즉, 아직 대부분의 모델이 2D HMM으로 보기에는 부족하다고 판단된다. 본 논문에서 제안하는 모델은 이 차원 공간에서 상하, 좌우 방향의 진행 관계(causality)가 존재하는 은닉 마르코프 격자 또는 HML이다. 여기에 격자 구성 조건을 추가하여 모델 평가와 디코딩, 그리고 MLE 매개변수 추정법에 의한 훈련 알고리즘을 이론적으로 유도, 개발하였다. 본 모델은 기존의 필드형 모델과 달리 필기 문자 영상과 같이 다양한 국소적 형태 변형을 효과적으로 모델링하는 유용한 방법으로 사용될 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.925-928
• /
• 1998

In this paper, we implemented a sign language communication system between korean and japanese using 3D model. Unitl now, we have developed the system through 2D image. The system, however, has some drawbacks base don the limitations of 2D model. Especially it is not comprehensive in the sign language gesture including forward or backward movements becasue it can only display a front view. Therefore, we employed a 3D model for the representation of sign language. The proposed communication system si implemented with windows 95 visual C++ 5.0 imported open inventor library on pentium 233 system. Experimented results show that the 3D system can solve the problems in 2D representation.

• 대한원격탐사학회지
• /
• 제25권3호
• /
• pp.205-214
• /
• 2009

This paper investigates stereo 3D viewing for linear pushbroom satellite images using the Orbit-Attitude Model proposed by Kim (2006) and using OpenGL graphic library in Digital Photogrammetry Workstation. 3D viewing is tested with KOMPSAT-2 satellite stereo images, a large number of GCPs (Ground control points) collected by GPS surveying and orbit-attitude sensor model as a rigorous sensor model. Comparison is carried out by two accuracy measurements: the accuracy of orbit-attitude modeling with bundle adjustment and accuracy analysis of errors in x and y parallaxes. This research result will help to understand the nature of 3D objects for high resolution satellite images, and we will be able to measure accurate 3D object space coordinates in virtual or real 3D environment.

• 디지털융복합연구
• /
• 제15권7호
• /
• pp.393-400
• /
• 2017

일반적으로 특수영상 및 3D 애니메이션 제작에서 캐릭터와 배경을 3D 모델링을 할 때 MAYA나 3DS MAX 등의 3D 프로그램을 사용하여 제작한다. 그러나 이러한 제작방식은 작업 시간이 많이 소요될 뿐만 아니라 고비용이 발생한다. 본 연구에서는 2D 포토스캔 제작기술을 활용한 3D 모델링 제작방법의 우수성과 효율성을 증명하기 위하여 두 가지 실험을 하였다. 첫 번째, 동일한 오브젝트를 다양한 방법으로 모델링을 하였다. 두 번째, 동일한 백그라운드를 각기 다른 방법을 이용하여 모델링을 하였다. 이 두 가지 실험을 통하여 효과적인 2D 포토스캔 제작방법으로 모델링 시 유의해야할 사항과 제작기술 등을 제시하였다. 또한 실험에 따른 결과물을 바탕으로 2D 포토스캔 모델링 제작방법의 효율성과 우수성을 증명하였다.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.91-101
• /
• 2016

PURPOSES : The aim of this study was to compare the performance of the QUEENSOD method and the gravity model in estimating Origin-Destination (O/D) tables for a large-sized microscopic traffic simulation network. METHODS : In this study, an expressway network was simulated using the microscopic traffic simulation model, VISSIM. The gravity model and QUEENSOD method were used to estimate the O/D pairs between internal and between external zones. RESULTS: After obtaining estimations of the O/D table by using both the gravity model and the QUEENSOD method, the value of the root mean square error (RMSE) for O/D pairs between internal zones were compared. For the gravity model and the QUEENSOD method, the RMSE obtained were 386.0 and 241.2, respectively. The O/D tables estimated using both methods were then entered into the VISSIM networks and calibrated with measured travel time. The resulting estimated travel times were then compared. For the gravity model and the QUEENSOD method, the estimated travel times showed 1.16% and 0.45% deviation from the surveyed travel time, respectively. CONCLUSIONS : In building a large-sized microscopic traffic simulation network, an O/D matrix is essential in order to produce reliable analysis results. When link counts from diverse ITS facilities are available, the QUEENSOD method outperforms the gravity model.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.580-586
• /
• 2010

The purpose of this study is to analyze the behavior of the concrete pile under the horizontal loads by the model tests in laboratory. The rock ground was modeled by the concrete of about 30MPa, and a model pile was made of some mortar with the capacity of 24MPa. The diameter(D) and length(L) of a model pile was each 1200mm and 1800mm. The embedment depth into the concrete block was varied with 1.0D, 1.5D, and 2.0D in the model tests. The results of model tests showed that the lateral resistance of a pile with the embedment depth of 2.0D was more large than other cases, and the lateral displacement of yielding was similar.

• 한국IT서비스학회지
• /
• 제2권2호
• /
• pp.15-29
• /
• 2003

This thesis suggests a R&D model for Korean SI companies who aggressively drive oversea business to overcome domestic market limitation and to become world class SI players. Even though there have been a lot of discussions on IT technologies and new business models, scientific approach to a R&D model for SI companies is rare due to its natural distinctiveness from manufacturing and general service domain. Therefore, this will be a flagship thesis to keep up our study. As business market environment gets more competitive, major Korean SI players will be confronted with much more keen competition among themselves. And as they are willing to expand their oversea market presence, they can not help struggling against global SI players. So, here we are presenting SI players the reinforcement of R&D as one of the key components to build up their own core competencies. That is, SI players have to adopt and evaluate fast changing and complicated IT technologies at the right time, and to apply them into a real business with cost-effective service delivery and operation processes internally. The ultimate purpose of all of these activities is to offer a SI company the value added business model based on its innovative technical capabilities and well refined service deliver model. For this purpose, we suggests, SI company's R&D has to play an important role of emerging technology verification/evaluation/utilization, value added business model creation, future innovation lead, standard body participation, and effective service delivery and quality system development. To become a more effective R&D organization, hybrid R&D, in which central R&D and divisional sub R&D work together, is considered as an idea model. The reliability of the R&D model for Korean SI companies', here we suggest, has been checked by SI companies R&D specialists and on-site business people.

• Reproductive and Developmental Biology
• /
• 제33권3호
• /
• pp.119-123
• /
• 2009

The two dimensional quantitative structure-activity relationships (2D-QSARs) models concerning the binding affinity constants ($p[Od.]_{50}$) between 2-cyclohexyltetrahydropyrane and 2-cyclohexyltetrahydrofurane analogues as substrates, and bovine odorant binding protein (bOBP) as receptor were derived by multiple regression analyses method and discussed. The statistical quality of the optimized 2D-QSAR model (5) was good (r=0.907). From the model, the binding affinity constants ($p[Od.]_{50}$) were dependent upon the optimal value ($(TL)_{opt.}$=2.737) of total lipole (TL) of substrate molecules. Based on these findings, the high active compounds predicted by optimized 2D-QSAR model (5) were 2-(dimethylcyclohexyl)tetrahydropyrane molecule and their isomer molecules. The binding affinity constants regarding bOBP of the tetrahydrofuryl-2-yl family compounds were dependent upon the hydrophobicity (logP) of whole substrate molecules. In any case of porcine odorant-binding proteins (pOBP), the constants were dependent upon the hydrophobicity (${\pi}x={\log}P_X-{\log}P_H$) of substituents (R) in substrate molecules. Also, from the optimal values of hydrophobic constant, the hydrophobicity for bOBP influenced ca. twice time bigger (bOBP>pOBP) than that for pOBP.