• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.51-55
• /
• 2021

With the recent development of various smartphone designs in the smartphone market, the use of curved cover glass has been required, and interest in curved glass production has increased. In this paper, we designed a pressurization system that simplified the size of the system using a wedge amplification mechanism for smartphone curved glass molding systems. The pressurization system consisted of a linear motor, a wedge, and a force sensor. The wedge was used to amplify the force, and the piezoelectric sensor was used to measure the force. In addition, the proposed amplification mechanism was confirmed to have an error of 1.27% through an experiment compared to the simulation, and the pressurization error of 0.76% for the pressurization profile 3,500N was verified through an experiment.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.29-34
• /
• 2006

It is revealed that these are correlated with the height of chamber deciding the turbulence extent. In the first experiment, It was examined about the effects of different multiple obstacles such as circular, triangular and square things with the rig that the dimension of original experimental rig was $700{\times}700{\times}200mm{\wedge}3$. Then the heights of chamber were increased from 200 to 1000mm. The dimensions of each obstacle were $70{\times}700{\times}{\wedge}2$ and rectangular vent area were $210{\times}700{\times}{\wedge}2$. In the second one, we performed to see the effects of locations of different multiple obstacles in 200, 500 and 800mm height from the bottom. The results are : The multiple triangular obstacles caused the highest overpressure while the lowest one was the multiple circle bars. Then, the triangular bars caused the highest flame acceleration while the circular obstacles was lowest too. The results showed that the critical height was 800mm due to the formation of turbulence. And the lesser $Av/V^{2/3}$ were small, the more pressure and pressure acceleration rate were increased.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.28-30
• /
• 1989

This paper is analyzed the electrical characteristics of the round solid rotor of turbo-generator without damper cage influence the induction generation modes and the torsional interaction modes of the SSR phenomena, and then examines the problem of representing electrical characteristics which is dependent on frequency and different wedge materials. The basic model of turbo-generator used in the field analysis is viewed as 5-regions of different permeability and conductivity characteristics. The analytical method, which is used in this paper is based on solving a boundary value problem involving 3-D fields, and the basic function consists of the 2-D Fourier series.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.85-91
• /
• 2015

This paper presents a novel frame rate up-conversion (FRUC) algorithm. Existing algorithms, in general, employ rectangular blocks for motion estimation and arbitrary shape of an actual object region cannot be precisely represented. On the other hand, the proposed wedge-shaped block partitioning algorithm partitions a rectangular block into two wedge-shaped blocks using the texture information, which makes better approximation for an actual object region. The wedge-shaped block partitioning algorithm as well as the adaptive motion vector prediction algorithm is used to reliably estimate the actual motion. Experimental results show that the proposed FRUC algorithm is superior to existing algorithms up to 1.988dB in PSNR and 0.0167 in SSIM comparisons.

• Computers and Concrete
• /
• v.19 no.2
• /
• pp.211-216
• /
• 2017

Crack on concrete surface allows more rapid penetration of chlorides. Crack width and depth are dominant parameters for chloride behavior, however their effects on chloride penetration are difficult to quantify. In the present work, the previous anisotropic (1-D) model on chloride diffusion in concrete with single crack is improved considering crack shape and roughness. In the previous model, parallel-piped shape was adopted for crack shape in steady-state condition. The previous model with single crack is improved considering wedge shape of crack profile and roughness. For verifying the proposed model, concrete samples for nuclear power plant are prepared and various crack widths are induced 0.0 to 1.2 mm. The chloride diffusion coefficients in steady-state condition are evaluated and compared with simulation results. The proposed model which can handle crack shape and roughness factor is evaluated to decrease chloride diffusion and can provide more reasonable results due to reduced area of crack profile. The roughness effect on diffusion is evaluated to be 10-20% of reduction in chloride diffusion.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.119-120
• /
• 2002

The aim is to urge the need of elaborate commissioning of 3D RTP system from the firsthand experience. A 3D RTP system requires so much data such as beam data and patient data. Most data of radiation beam are directly transferred from a 3D dose scanning system, and some other data are input by editing. In the process inputting parameters and/or data, no error should occur. For RTP system using algorithm-bas ed-on beam-modeling, careless beam-data processing could also cause the treatment error. Beam data of 3 different qualities of photon from two linear accelerators, patient data and calculated results were commissioned. For PDD, the doses by Clarkson, convolution, superposition and fast superposition methods at 10 cm for 10${\times}$10 cm field, 100 cm SSD were compared with the measured. An error in the SCD for one quality was input by the service engineer. Whole SCD defined by a physicist is SAD plus d$\sub$max/, the value was just SAD. That resulted in increase of MU by 100${\times}$((1_d$\sub$max//SAD)$^2$-1)%. For 10${\times}$10 cm open field, 1 m SSD and at 10 cm depth in uniform medium of relative electron density (RED) 1, PDDs for 4 algorithms of dose calculation, Clarkson, convolution, superposition and fast-superposition, were compared with the measured. The calculated PDD were similar to the measured. For 10${\times}$10 cm open field, 1 m SSD and at 10 cm depth with 5 cm thick inhomogeneity of RED 0.2 under 2 cm thick RED 1 medium, PDDs for 4 algorithms were compared. PDDs ranged from 72.2% to 77.0% for 4 MV X-ray and from 90.9% to 95.6% for 6 MV X-ray. PDDs were of maximum for convolution and of minimum for superposition. For 15${\times}$15 cm symmetric wedged field, wedge factor was not constant for calculation mode, even though same geometry. The reason is that their wedge factor is considering beam hardness and ray path. Their definition requires their users to change the concept of wedge factor. RTP user should elaborately review beam data and calculation algorithm in commissioning.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.4
• /
• pp.237-243
• /
• 1995

We have studied methods of detecting attenuation of solid materials such as silicon wafer and piezoelectric $LiTaO_3$ by means of optical probing techniques. We have performed measurements of surface acoustic waves(SAW) generated from 90 degree wedge type transducer and also from inter-digital transducers(IDT). SAW of 20.0 MHz was generated on a silicon wafer from the 90 degree wedge type transducer and those of 20.8 and 14.5 MHz are generated on a $LiTaO_3$ from the IDT. Then any surface-corrugation resulted from the above SAW was investigated by He-Ne laser beams. We projected laser beams, which were modulated by an optical chopper, on the SAW of the same frequency and then measured the scattered beam by the lock-in amplifier. We modulated and synchronized both SAW and the incident laser beam as well as the phase sensitive detector(PSD) to the same frequency in order to simplify our measurement system. We obtained the attenuation coefficients of SAW to be $0.62{\sim}0.75dB/mm$(from IDT1, 20.8 MHz), and $0.60{\sim}0.72dB/mm$(from IDT2, 14.5 MHz), $0.83{\sim}1.28dB/mm$(from the wedge type), respectively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.2
• /
• pp.185-191
• /
• 2012

Typically, a wedge is involved to generate effectively high inspection angle in pipe weld inspection using phased array ultrasonic technique. But the usage of this wedge for weld or access limited area can cause coverage limitation for the examination volume because of the wedge front length. Therefore, the shear wave phased array probe which can generate high inspection angle without wedge is essentially necessary. In this paper, the shear wave phased array ultrasonic probe which can generate high inspection angle designed by modeling and manufactured from the modelling result. And this shear wave probe tested whether it can detect and sizing for EDM test block that contains various depth. As results, the experimental results show that the designed shear wave phased array probe can detect and size with reliable accuracy. Therefore if this phased array probe apply in field inspection, it is expected that it show more reliable inspection result for plant structure having access limitation.

• Nonlinear Functional Analysis and Applications
• /
• v.27 no.2
• /
• pp.271-287
• /
• 2022

In this article, we shall prove a common fixed point theorem for two weakly compatible self-maps 𝒫 and 𝔔 on a dislocated metric space (M, d^*) satisfying the following ξ-weakly expansive condition: d^*(𝒫c, 𝒫d) ≥ d^* (𝔔c, 𝔔d) + ξ(∧(𝔔c, 𝔔d)), ∀ c, d ∈ M, where $${\wedge}(Qc,\;Qd)=max\{d^*(Qc,\;Qd),\;d^*(Qc,\;\mathcal{P}c),\;d^*(Qd,\;\mathcal{P}d),\;\frac{d^*(Qc,\;\mathcal{P}c){\cdot}d^*(Qd,\;\mathcal{P}d)}{1+d^*(Qc,\;Qd)},\;\frac{d^*(Qc,\;\mathcal{P}c){\cdot}d^*(Qd,\;\mathcal{P}d)}{1+d^*(\mathcal{P}c,\;\mathcal{P}d)}\}$$. Also, we have proved common fixed point theorems for the above mentioned weakly compatible self-maps along with E.A. property and (CLR) property. An illustrative example is also provided to support our results.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.24-30
• /
• 2009

본 연구에서는 기존에 널리 사용되어져 온 Wavier-Stokes 방정식을 풀이하는 전통적인 CFD 해석에서 벗어나 최근에 그 응용 분야를 넓혀가고 있는 LBM의 해석코드를 개발하고, 이를 이용하여 이차원 채널속에 놓여진 쇄기형 물체 주위의 유동특성을 조사하였다. D2Q9 격자계 및 Bhatnagar-Gross-Krook (LBGK) 모델을 채택하였으며, 수치해석 결과는 기존의 실험결과의 잘 일치하였다. 쇄기형 물체에서 와의 형성 및 방출 Reynolds 수 범위는 $32{\leq}Re{\leq}620$ 이며, 원형실린더에서 알려진 Karman 와열을 형성하는 주기적인 와방출은 대칭적인 와가 형성된 후 $Re{\geq}85$부터 시작되며 Reynolds 수의 증가에 따라 와 방출 주파수는 증가되었다.