• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.196-203
• /
• 2010

2DOF is applied to induction moor in order to supply these weak points of PI torque control method in this paper. and The proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. To prove the propriety of this paper, the various simulations carried out adequacy and stability using Matlab, and at the same time real system is made, so it is proved. As the results of embodying the system, the robust system is realized.

• Journal of Biosystems Engineering
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2000

In Korea, researches for year-round leaf vegetables production system are in progress and the most of them are focused on environment control. Automation technologies for harvesting , transporting and grading need to be developed. This study was conducted to develop harvesting process automation system profitable to a competitive price. 1. Manipulator and end-effector are to be designed and fabricated , and fuzzy logic controller for controlling these are to be composed. 2. The entire system constructed is to be evaluated through a performance test. A robot system for harvesting a lettuce was developed. It was composed of a manipulator with 20DOF (degrees of freedom) an end-effector, a lettuce feeding conveyor , an air blower , a machine vision device, 6 photoelectric sensors and a fuzzy logic controller. A fuzzy logic control was applied to determined appropriate grip force on lettuce. Leaf area index and height index were used as input parameters, and voltage was used as output parameter for the fuzzy logic controller . Success rate of the lettuce harvesting system was 93.06% , and average harvesting time was about 5 seconds per lettuce.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.2
• /
• pp.61-68
• /
• 2005

This paper is concerned with attitude control of 2 rotor 1 DOF aerial vehicle. The proposed controller consists of two parts: the attitude estimation filter part and PID controller part. For attitude estimation, performance of 3 different filters (complementary filters, Kalman filter, indirect Kalman filters) are tested and compared. For the PID controller, characteristic ratio assignment methods are used to assign PID coefficients. Through experiments, it is shown that attitude of the vehicle successfully follows the step command.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.187-195
• /
• 2015

The gas explosions in offshore installations are known to be very severe according to its geometry and environmental conditions such as leak locations and wind directions, and a dynamic response of structures due to blast loads depends on the load profile. Therefore, a parametric study has to be conducted to investigate the effects of the dynamic response of structural members subjected to various types of load shapes. To do so, a series of CFD analyses was performed using a full-scale FPSO topside model including detail parts of pipes and equipments, and the time history data of the blast loads at monitor points and panels were obtained by the analyses. In this paper, we focus on a structural dynamic response subjected to blast loads changing the magnitude of positive/negative phase pressure and time duration. From the results of linear/nonlinear transient analyses using single degree of freedom(SDOF) and multi-degree-of freedom(MDOF) systems, it was observed that dynamic responses of structures were significantly influenced by the magnitude of positive and negative phase pressures and negative time duration.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.5
• /
• pp.439-446
• /
• 2012

This paper presents an implicit moving least squares(MLS) difference method for improving the solution accuracy of 1-D free boundary problems, which implicitly updates the topology change of moving interface. The conventional MLS difference method explicitly updates the moving interface; it requires no iterative solution procedure but results in the loss of accuracy. However, the newly developed implicit scheme makes the total system nonlinear involving iterative solution procedure, but numerical verification show that it dramatically elevates the solution accuracy with moderate computation increase. Through numerical experiments for melting problems having moving singularity, it is verified that the proposed method can achieve the second order accuracy.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.824-832
• /
• 2011

An essential consideration to differentiate prosthetic hand from robot hand is its convenience and usefulness rather than high resolution or multi-function of the robot hand. Therefore, this study proposes a myoelectric hand with a 2 DOF auto wrist module which has 6 essential functions of the human hand such as open, grasp, pronation, supination, extension, flexion, which improves the convenience of the daily life. It consists of the 3 main parts, the myoelectric sensor for input signal without additional attachment to operate the prosthetic hand, hand mechanism with high-torqued auto-transmission mechanism and self-locking module which guarantee the safety under the abrupt emergency and minimum power consumption, and dual threshold based controller to make easy for adopting the multi-DOF myoelectric hand. We prove the validity of the proposed system with experimental results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.29-35
• /
• 2019

In this paper, a low-cost dynamic measurement system using the RGB-depth camera, Microsoft $Kinect^{(R)}$ v2, is proposed for measuring time-varying free surface motion of liquid dampers used in building vibration mitigation. Various experimental studies are conducted consecutively: performance evaluation and validation of the $Kinect^{(R)}$ v2, real-time monitoring using the $Kinect^{(R)}$ v2 SDK(software development kits), point cloud acquisition of liquid free surface in the 3D space, comparison with the existing video sensing technology. Utilizing the proposed $Kinect^{(R)}$ v2-based measurement system in this study, dynamic behavior of liquid in a laboratory-scaled small tank under a wide frequency range of input excitation is experimentally analyzed.

• 월간낙농육우
• /
• v.21 no.2 s.226
• /
• pp.124-131
• /
• 2001

TMR 사양시스템은 사료효율을 유지하면서 사료 섭취량을 조절하여 언제든지 균일한 영양소가 함유된 사료를 자유채식 시킬 수 있으므로 능력이 좋은 소 일수록 TMR이 필요하게 된다. 보다 질 좋은 TMR 제조를 위해서는 각 원료사료 특히 조사료의 중요성을 인식해야 하겠다. 조사료의 품질과 조사료의 입자도를 고려하는 것이 젖소의 생선성 향상과 밀접한 관계가 있으므로 양질의 조사료 확보에 힘써야 할 것이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.156-162
• /
• 2008

The static aeroelastic analysis of composite hingeless rotor blades in hover was performed using free-wake method. Large deflection beam theory was applied to analyze blade motions as a one-dimension beam. Anisotropic beam theory was applied to perform a cross-sectional analysis for composite rotor blades. Aerodynamic loads were calculated through a three-dimensional aerodynamic model which is based on the unsteady vortex lattice method. The wake geometry in hover was described using a time-marching free-wake method. Numerical results of the steady-state deflections for the composite hingeless rotor blades were presented and compared with those results based on two-dimensional quasi-steady strip theory and prescribed wake method. It was shown that wakes affect the steady-state deflections.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.150-156
• /
• 2007

In this paper, we focus on the fault detection and isolation(FDI) method for inertial navigation system with three two-degree of freedom dynamically tuned gyros(DTG) on orthogonal sensor configuration. we propose the FDI method which can detect the fault of each DTGs rather than the fault of each sensing axis. The proposed FDI method is separated into two FDI modules according to the fault magnitude in order to improve the reliability of fault detection information. For large fault detection, only instantaneous DTG measurement is used to detect a fault DTG within a short time. For small fault detection, the integrated value of DTG measurements are used to detect a fault DTG. It takes a more time to detect a fault but it serves more reliable fault detection information. Using the proposed FDI method with consideration of DTG fault characteristic, we could find out a fault DTG successfully.