• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.83-91
• /
• 2004

The determination of camera position and orientation from known correspondences of 3D reference points and their images is known as pose estimation in computer vision or space resection in photogrammetry. This paper discusses estimation of transform parameters using the pattern matching method with 2D images only. In general, the 3D reference points or lines are needed to find out the 3D transform parameters, but this method is applied without the 3D reference points or lines. It uses only two images to find out the transform parameters between two image. The algorithm is simulated using Visual C＋＋ on Windows 98.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.553-556
• /
• 2001

본 논문은 불완전한 휘도/색신호 분리로 인해 복조된 NTSC 칼라 TV신호의 휘도와 색차신호의 경계(edge)에서 나타나는 dot 패턴을 제거하는 2차원 필터에 대한 것이다. 제안된 필터는 휘도와 색차신호의 천이영역 검출신호와 dot 패턴 검출신호에 따라 직렬(cascade)로 연결된 수평-수직방향 저역통과필터의 차단주파수를 조절함으로써 dot 패턴을 감소시킨다. 제안 방식의 성능을 검증하기 위하여 현재 가장 많이 사용되는 NTSC 디코더 칩인 BT835과 SAA7113H을 이용하여 복조된 휘도와 색차신호에 적용한 결과 영상신호가 변화를 갖는 경계 영역에서 발생한 dot 패턴과 불완전한 복조로 인해 발생하는 평탄영역에서의 dot 패턴이 제거되었음을 확인할 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.707-710
• /
• 2003

본 논문은 2차원 전기영동에 의해 나타나는 TOGS 영상을 분석하기 위한 시스템으로 실험적인 특성상 젤 위에 나타나는 반점들의 불규칙한 요소들이 많고 영상의 상태가 좋지 않은 경우 명암도가 떨어지는 반점들의 구분이 힘들게 된다. 기존의 전문가의 육안에 의한 TDGS 영상 분석은 그러한 불안적 요소들에 대해 유연하게 대처할 수 있는 능력이 있었다. 하지만, 그러한 예외적인 경우를 컴퓨터가 처리하기 위해서는 영상의 지역적 상태에 맞는 융통성 있는 영상처리 과정이 필요하고, 실제 분석에 사용되지 않는 반정들을 제외한 유효한 디지털 패턴의 판별이 요구된다. 이에 본 논문에서는 영상의 지역적 특성을 효과적으로 반영한 동적 이진화 방법을 통해 후보 패턴들을 추출하고, 모든 샘플들의 기준이 되는 Reference 패턴과 후보 패턴의 point matching 과정을 통해 디지털 패턴을 추출한다.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.3
• /
• pp.833-841
• /
• 1998

The ann of this study is 10 propose all eff'tcient mclhod for partition of multi-dimensIOnal feature space into pattern subspace for automated generation of fuzzy rule. The suggested mclhod predicates on sequential subdivision of the fuzzy subspacc. and the size of construc1cd pattern space is variable. Under this procedure, n-dimensional pattern space, after considering the distributional characteristic patterns, is partitioned into two different pattern subspaces. From the two subspaces, the pattern space for further subdivision is chosen; then, this subdivision procedure recursively repeats itself until the stopping condition is fulfilled. The result of this study is applied to 2, 4, 7 band of satellite Landsat TM and satisfac10ry result is acquired.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.6
• /
• pp.496-504
• /
• 2003

In this paper, the error tolerance of each array element to ensure a given specified error level for the array pattern is analyzed using the Genetic Algorithm. In the conventional deterministic method for synthesis of sonar way problems the computational resource required in the simulation grows rapidly as the number of way elements increases. To alleviate this numerical inefficiency, the Monte-Carlo method may be considered as an alternative technique for array syntheses. However, it is difficult to apply the method to the synthesis of array patterns because of its relatively lower accuracy in spite of moderate computational complexity. A new analysis method for estimating error tolerances in sonar arrays is Proposed since the Genetic Algorithm has significant promise to efficiently solve way synthesis problems. Through several numerical tests in linear and planar arrays, it is demonstrated that the proposed method can provide accurate results for error tolerances of sonar arrays.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.76-92
• /
• 2016

산업이 고도화될수록 높은 품질과 보다 정밀하게 가공된 제품의 안정된 생산이 요구되고 있으며, 그에 대한 표준화된 측정법 및 관리법이 요구되고 있다. 산업체에서 생산되는 다양한 형태의 제품들 중, 마이크로메타 또는 나노메타 수준의 정밀한 가공 및 측정에 있어서, 정확하고 일관성 있게 빠른 시간 안에 제품분석을 수행 할 수 있는 방법은 오래 전부터 활발히 연구되고 있으며, 그 중 광학 기반의 3D-profiler 는 빠른 속도와 간편한 사용으로 많은 인기를 얻고 있다. 이러한 분석법은 광학 현미경의 평면 분해능을 가지고, 나노크기의 물체 높이를 판별하여, 측정된 정보를 3차원 이미지로 형태를 재 구성할 수 있어, 미세한 표면 조도 변화나 나노 수준의 패턴 단차에 대한 정보를 간단하게 얻을 수 있다. 또한 빛의 간섭현상에 기초하여 시료 표면에 대한 정보를 얻기 때문에 원자단위 이하 수준의 측정 해상도를 가지게 된다. 표면의 칼라패턴에 대해서도 2D 평면 정보를 기초로, 다양한 색상의 패턴들에 대해 각각의 색에 따른 정확한 높이 분석 및 그 패턴 분리, 색깔과 매칭되는 3D 이미지 구현 등과 같은 분석이 가능하여, 이를 활용하여 다양한 분야에서 활발히 사용되고 있다. 실제 현장에서 측정된 다양한 3D 이미지를 소개하며, 이를 통해 광학 3D-Profiler에 대한 전반적인 성능 소개와 그 이해를 돕고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.51-52
• /
• 2014

Non-destructive technique to measure internal structure and constant distribution of material can be widely used to exploration of mineral resources, identification of underground cables and buried pipelines, and diagnostic imaging in medical area. In this paper, we considered 2-dimensional EM scattering problem. Radiation pattern in far field is estimated by using some measured information obtained from near-field solutions.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.135-143
• /
• 2020

This paper proposes a pre-processing method and a dimensional reduction method in the analysis of shopping carts where there are many correlations between variables when dividing the types of consumers in the agri-food consumer panel data. Cluster analysis is a widely used method for dividing observational objects into several clusters in multivariate data. However, cluster analysis through dimensional reduction may be more effective when several variables are related. In this paper, the food consumption data surveyed of 1,987 households was clustered using the K-means method, and 17 variables were re-selected to divide it into the clusters. Principal component analysis and factor analysis were compared as the solution for multicollinearity problems and as the way to reduce dimensions for clustering. In this study, both principal component analysis and factor analysis reduced the dataset into two dimensions. Although the principal component analysis divided the dataset into three clusters, it did not seem that the difference among the characteristics of the cluster appeared well. However, the characteristics of the clusters in the consumption pattern were well distinguished under the factor analysis method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.3-8
• /
• 2013

Bit patterned media (BPM) storage is one of the promising technologies to overcome the limitations of the conventional magnetic recording. However, there are some problems in a high areal density BPM storage, inter-track interference, inter-symbol interference and noise which are severely degrading performance of the system with reducing the bit error rate. In this paper, we present a simple iterative two-dimensional equalizer based on the contraction mapping theorem to mitigate these adverse effects. Furthermore, we examine that the channel characteristics of the proposed two-dimensional equalizer satisfies the convergence conditions. In the simulation we demonstrate the bit separation characteristics of the one-dimensional equalizer and the two-dimensional equalizer and evaluate the BER performance of the proposed equalizer comparing with the conventional equalizers. According to the results of experiments, the proposed equalizer is an promising equalizer with maintaining proper complexity for a high areal density BPM storage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.