• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.29-37
• /
• 2003

An approach is described for automatic measuring of GCP's image coordinates from SPOT imagery and focused on the fulfillment an automatic orientation of satellite images. For the orientation of a stereopair of digital images, firstly, GCP(Ground Control Point) should be selected and then the work for measuring of image coordinates correspond to GCPs is required. In this study, we propose the method for extracting the GCP's image coordinates automatically using an image patch for control points and auxiliary points matching. For the evaluation of measurement accuracy, a comparison between points those are extracted manually and automatically by a proposed method have made. Finally, we shows the feasibility of automatic image coordinates measurment by applying in stereo modeling for SPOT images.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.227-228
• /
• 2013

본 논문에서는 연속적으로 입력되는 스테레오 입체 영상으로부터 2차원과 3차원의 특징을 결합하여 군집화함으로써 대상 물체를 보다 강건하게 분할하는 기법을 제안한다. 제안된 방법에서는 촬영된 장면의 좌우 영상으로부터 스테레오 정합 알고리즘을 이용해 영상의 각 화소별로 카메라와 물체 사이의 거리를 나타내는 깊이 특징을 추출한다. 그런 다음, 깊이와 색상 특징을 효과적으로 군집화하여 배경에 해당하는 영역을 제외하고, 전경에 해당하는 대상 물체를 감지한다. 실험에서는 제안된 방법을 여러가지 영상에 적용하여 테스트를 해 보았으며, 제안된 방법이 기존의 2차원 기반의 물체 분리 방법에 비해 보다 강건하게 대상물체를 분할함을 확인하였다.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.257-261
• /
• 1995

Confocal laser scanning microscopy (CLSM)는 기존의 coherent or incoherent microscopic imaging 보다 횡축 방향 (lateral direction)으로 고해상도를 가지며, 층과 층 사이를 구분하는 광축 방향 (axial direction)의 optical sectioning에 의해 샘플의 3D 구조를 고해상도로 영상화함으로써 3D 구조 및 생체 기능 분석을 가능하게 해 준다. 본 논문에서는 CLSM에 의한 3D 영상화 원리와 촛점면 부근에서 얻어지는 광세기 분포, 얻어진 2D slice 영상의 시각화 및 응용에 대해 논의된다.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.121-130
• /
• 2011

This paper highlights the reconstruction of the rectilinear type of 3D rooftop model from satellite image data using centroid neural network. The main idea of the proposed 3D reconstruction method is based on the grouping of 3D line segments. 3D lines are extracted by 2D lines and DEM (Digital Elevation Map) data evaluated from a pair of stereo images. Our grouping process consists of two steps. We carry out the first grouping process to group fragmented or duplicated 3D lines into the principal 3D lines, which can be used to construct the rooftop model, and construct the groups of lines that are parallel each other in the second step. From the grouping result, 3D rooftop models are reconstructed by the final clustering process. High-resolution IKONOS images are utilized for the experiments. The experimental result's indicate that the reconstructed building models almost reflect the actual position and shape of buildings in a precise manner, and that the proposed approach can be efficiently applied to building reconstruction problem from high-resolution satellite images of an urban area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.375-381
• /
• 2007

A novel method to register images onto 3D data, such as 3D point cloud, 3D vectors, and 3D surfaces, is proposed. The proposed method estimates the exterior orientation of a camera with respective to the 3D data though fitting pairs of the normal vectors of two planes passing a focal point and 2D and 3D lines extracted from an image and the 3D data, respectively. The fitting condition is that the angle between each pair of the normal vectors has to be zero. This condition can be represented as a numerical formula using the inner product of the normal vectors. This paper demonstrates the proposed method can estimate the exterior orientation for the image registration as simulation tests.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.128-133
• /
• 2015

This paper describes the construction of a static 3D ultrasonography image by tracking the radiation beam position during the handy operation of a 1D array probe to enable point-of-care use. The theoretical model of the transformation from the translational and rotational information of the sensor mounted on the probe to the reference Cartesian coordinate system was given. The signal amplification and serial communication interface module was made using a commercially available sensor. A test phantom was also made using silicone putty in a donut shape. During the movement of the hand-held probe, B-mode movie and sensor signals were recorded. B-mode images were periodically selected from the movie, and the gray levels of the pixels for each image were converted to the gray levels of 3D voxels. 3D and 2D images of arbitrary cross-section of the B-mode type were also constructed from the voxel data, and agreed well with the shape of the test phantom.

• Journal of Digital Convergence
• /
• v.13 no.2
• /
• pp.193-204
• /
• 2015

An array DBMS has been expected widely from scientists because it is convenient to store and analyze the data of array type. In this paper, we describe how to handle satellite remote-sensing images in the array DBMS. However, previous works in their visualization have two problems as follows. First, the images are visualized as a state of distorted by the curvature of the earth. Second, it is difficult to apply the results of visualization by pre-written queries to other analyses. Therefore, this paper proposes a three dimensional visualization method of satellite remote-sensing images, not traditional 2D visualization. Our research contents are as follows. First, we describe how to store, process, and analyze the satellite remote-sensing images in the array DBMS. Second, we propose a three-dimensional visualization method for their processed outputs. Lastly, our contributions can be summarized that we propose a method of handling satellite remote-sensing images in the array DBMS and their 3D visualization techniques. It is also expected that their use be available widely in many industrial areas.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04c
• /
• pp.169-171
• /
• 2003

현실감 있는 얼굴 모델을 생성하기 위한 방법은 70년대부터 계속되었지만, 얼굴 구조의 복잡성, 색상과 텍스처의 다양한 분포, 잔주름과 같은 미세한 부분을 표현하기 어렵다는 정들로 인해 아직까지도 계속 연구되어지고 있다. 본 논문은 기존의 하드웨어 의존적인 3차원 얼굴 모델을 생성 방법이 아닌 2차원 얼굴 영상만으로 얼굴 모델을 생성하는 방법을 제시한다. 연구 수행 단계는 크게 얼굴 영역 검출 과정과 얼굴 모델링 과정으로 나뉘어지며, 얼굴 영역 검출을 위해 정규화된 TS 색상값과 얼굴의 피부색에 대한 평균과 공분산을 이용한 마할라노비스 거리 측정법을 이용한다. 얼굴 모델링 과정에서는 2차원 영상으로부터 3차원 정보를 추출한 뒤 일반 얼굴 모델에 변형을 주어 모델을 생성한다. 보다 현실감 있는 모델을 생성하기 위해 텍스쳐 매핑 기법을 추가한다. 본 연구를 통해 생성되는 얼굴 모델은 아바타 생성, 화상회의, 인증 시스템과 같은 분야에 적용 가능하며, 입력 영상에 대한 제약점을 줄이고 또한 사람의 손이 거치지 않고 전체적으로 자동화되어 처리할 수 있는 시스템을 제안한다.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.351-364
• /
• 2002

Conventional 3D ultrasound imaging using mechanical ID arrays suffers from poor elevation resolution due to the limited depth-of-focus (DOF). On the other hand, 3D imaging systems using 2D phased arrays have a large number of active channels and hence require a very expensive and bulky beamforming hardware. To overcome these limitations, a new real-time volumetric imaging method using curved 2-D arrays is presented, in which a small subaperture, consisting of 256 elements, moves across the array surface to scan a volume of interest. For this purpose, a 2-D curved array is designed which consists of 90$\times$46 elements with 1.5λ inter-element spacing and has the same view angles along both the lateral and elevation directions as those of a commercial mechanical 1-D array. In the proposed method, transmit and receive subapertures are constructed by cutting the four corners of a rectangular aperture to obtain a required image qualify with a small number of active channels. In addition the receive subaperture size is increased by using a sparse array scheme that uses every other elements in both directions. To suppress the grating lobes elevated due to the increase in clement spacing, fold-over array scheme is adopted in transmit, which doubles the effective size of a transmit aperture in each direction. Computer simulation results show that the proposed method can provide almost the same and greatly improved resolutions in the lateral and elevation directions, respectively compared with the conventional 3D imaging with a mechanical 1-D array.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2021.06a
• /
• pp.154-156
• /
• 2021

최근 3차원 영상이 다양한 분야에서 활용되고 있으며, 이에 따라 3차원 영상에 대한 압축과 전송 방안에 대한 연구가 활발히 진행되고 있다. 국제 표준화 기구인 ISO/IEC 산하 Moving Picture Expert Group(MPEG)에서는 기존의 2차원 비디오 코덱을 이용하여 고밀도 포인트 클라우드 압축하는 방안인 V-PCC와 3DoF+ 영상을 압축하기 위한 방안인 MPEG Immersive Video(MIV)를 표준화 중에 있다. V-PCC와 MIV는 압축 방법의 유사성으로 인해 동일한 Volumetric Visual Video-based Coding(V3C) 형식으로 저장된다. 압축된 V3C 데이터를 효과적으로 저장하여 이용하기 위해서는 ISO based Media File Format(ISOBMFF) 캡슐화 과정이 필수적이다. 본 논문에서는 MPEG의 Carriage of V3C data 표준에 따라 V3C 데이터를 ISOBMFF로 캡슐화 실험을 진행하였으며, 실험에 대한 검증을 위하여 생성된 ISOBMFF 데이터를 V3C 데이터로 복원한 뒤, 디코딩 하여 확인하였다.