• Title/Summary/Keyword: 2차원 수리모형

Search Result 410, Processing Time 0.025 seconds

Construction of Hydrogeological Model for KURT Site Based on Geological Model (KURT 연구지역에서 지질모델을 이용한 수리지질모델의 구축)

  • Park, Kyung-Woo;Ko, Nak-Yeol;Ji, Sung-Hoon
    • Economic and Environmental Geology
    • /
    • v.51 no.2
    • /
    • pp.121-130
    • /
    • 2018
  • The KURT (KAERI Underground Research Tunnel) is a research tunnel which is located in KAERI (Korea Atomic Energy Research Institute) site. At KURT, researches on engineering and natural barrier system, which are the most important components for geological disposal system for high level radioactive waste, have been conducted. In this study, we synthesized the site characteristics obtained by various types of site investigation to introduce the geological model for KURT site, and induced the 3-D hydrogeological model for KURT site from the geological model. From the geological investigation at the surface and boreholes, four geological elements such as subsurface weathered zone, upper fractured rock, lower fractured rock and fracture zones were determined for the geological model. In addition, the geometries of these geological elements were also analyzed for the geological model to be three-dimensional. The results from 3-D geological model were used to construct the hydro-geological model for KURT site, which is one of the input data for groundwater flow modeling and safety assessment.

Characteristics and Sensitivity Analysis of Scour in the downstream of Inclined Weir (경사형보 하류부 세굴특성 및 민감도 분석)

  • Yeo, Chang Geon;Seo, Guen Soon;Song, Jai Woo;Lee, Seung Oh
    • 한국방재학회:학술대회논문집
    • /
    • 2011.02a
    • /
    • pp.98-98
    • /
    • 2011
  • 중소규모 하천에서 많이 설치되어 있는 경사형보를 대상으로 하류부 세굴에 대한 수리모형실험과 수치모의를 통하여 경사형보 하류부 세굴특성과 세굴영향인자들에 대한 민감도 분석을 실시하였다. 수리모형실험은 폭 0.8m, 길이 20m의 가변경사 직선 개수로에서 1 : 2(H/L)경사를 가지는 경사형보의 높이, 월류수심, 하류부 수심 변화에 따른 최대 세굴심과 세굴길이의 변화를 관측하였고, 수치모의는 유사이동 모의가 가능한 3차원 수치모형인 FLOW-3D를 이용하여 경사형 보의 경사 변화에 따른 하류부 세굴특성을 모의하였다. 수리모형실험 결과 최대 세굴심 및 세굴길이에 가장 영향을 크게 미치는 인자는 월류고이며, 하류부 수심은 최대 세굴심과 세굴길이의 감소효과 뿐만 아니라 세굴공의 형상에도 영향을 미쳤다. 낙하류의 유입 각도가 예연보에 비하여 작은 경사보는 예연보에 비하여 수평방향 유속이 상대적으로 증가하여 세굴길이가 증가하였으며 이로 인하여 세굴공 하류부 천이영역의 사면경사가 상대적으로 완만하게 형성되었다. 세굴공의 상류부에 재순환 영역이 발생되어 천이영역에서 이송되는 유사의 최대세굴심 발생 위치에 퇴적되는 현상을 방해하며 세굴공의 모양은 완전히 발달된 이중(double) 세굴공을 생성하였으며, 특히 낙하류의 유입각도와 하류부 수위의 영향으로 하류수심($h_t$)과 낙차고(H)의 비($h_t/H$)가 1.0 미만인 경우에 이중(double) 세굴공이 발생하였다. 경사형보의 경사각 영향에 따른 하류부 세굴 영향은 3차원 수치모형을 이용하여 모의하였으며, 경사각을 1V/2H, 1V/3H, 1V/4H로 변화시키며 수치모의를 수행하였다. 수치모의 결과 경사각이 증가할수록 최대 세굴심은 증가하는 경향을 보이고 그에 따른 증가율은 감소하였다. 보 높이, 월류고, 하류부 수심, 경사각 변화에 따른 세굴심의 변화는 상대민감도 방법을 이용하여 비교하였으며 주요 영향인자에 대한 민감도비는 월류고가 보 하류부 세굴에 가장 큰 영향을 미치고, 경사각, 보 높이, 하류부 수심 순이다. 특히 보 하류부의 수심은 음의 민감도를 보이며, 이는 보 하류부 수심이 증가할수록 세굴심이 감소하는 것을 의미한다. 추후 보완 실험 및 수치모의를 추가 활용한다면, 경사형보 하류부 물받이 및 하상보호공 설계를 위한 정량적인 기초자료를 제공할 수 있을 것으로 판단된다.

  • PDF

Appling Multi-dimensional Limiting Process (MLP) to shallow water flow simulation (MLP 기법을 이용한 천수흐름 수치모의)

  • An, Hyun-Uk;Yu, Soon-Young
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.537-537
    • /
    • 2012
  • 천수방정식의 수치모형은 하천의 유량예측, 홍수범람해석, 해일 모의 등에 널리 사용되고 있고, 그 결과는 수자원 관리, 재난 대책 등 정책적인 의사결정에 있어 유용한 자료로 활용되고 있다. 이처럼 천수방정식의 수치모형은 연구목적뿐만 아니라 실생활에 있어서도 큰 영향을 미치고 있으며, 이에 보다 정확하고 효율적인 수치모형의 구축이 수리/수자원/방재분야에서 중요한 영역이 되고 있다. 본 연구는 정확하고 안정적인 수치모의를 위해 천수방정식의 수치모형에 MLP(Multi dimensional Limiting Process)기법을 적용한 후 다차원 모의 시 MLP의 수치 진동 제어 성능을 검증하고자 하였다. MLP기법은 다차원에서 수치진동을 억제할 수 있도록 개발된 기법으로, 기존 TVD 제어자(limiter)과 MLP의 차이점은 기존 제어자들이 흐름이 발생하는 셀 경계면에서 재구성된 값이 Maximum Principle을 만족시키도록 제어자를 유도하는데 반해, MLP는 셀 절점에서 Maximum Principle을 만족시키도록 제어자를 유도한다는데 있다. MLP기법은 압축성 유체를 표현하는 2, 3차원 오일러 방정식에 적용되어 기존의 제어자들에 비해 안정적이며 정확한 수치모의를 가능하게 하는 것이 검증되었다. 하지만 천수방정식에 적용된 예는 없으며, 이에 본 연구는 천수방정식에 MLP를 적용하고 천수방정식 수치모형 검증에 주로 사용되는 수치모의를 통해 MLP의 수치 진동 제어 성능을 검증하였다. 모의 결과, MLP는 2차원 천수방정식에 있어서도 기존의 제어자들과 비교하여 수치진동을 보다 잘 제어하는 것으로 판단된다. MLP의 사용으로 인해 불연속면 근처에서 정확도가 향상되었고 수치진동이 발생하지 않아 보다 안정적인 모의가 가능하였다.

  • PDF

Development of Integrated Hydraulic/Hydrologic Model with HyGIS (HyGIS와 연계한 수리/수문통합 모형의 개발)

  • Han, Kun-Yeun;Ahn, Ki-Hong;Kim, Kyung-Rock;Park, Hong-Sung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.840-845
    • /
    • 2006
  • 본 연구는 수리.수문 모형화에서의 시공간 자료 분석기술 개발에 관한 연구로서, 국내 GIS엔진인 GeoMania를 기반으로 하여 개발된 HyGIS와 수리.수문 연계모형을 확립하였으며, 주요 연구 결과로, 현재 국내에서 가장 보편적이고 광범위하게 적용되고 있는 HEC-HMS 모형과 HEC-RAS 모형을 선정하여 사용자의 편의성을 도모하고, 모형의 입 출력 구조, GIS와의 연계방안 등을 분석하여 제시하였다. 또한 HyGIS-HMS 모형과 HEC-RAS 모형의 개발은 국내 GIS엔진인 GeoMania-Pro와 Add-ON 방식으로 연계되어 구동되며, 입력자료는 GeoMania-Pro 프로그램 상에서 GUI에 의한 대화식으로 구성되었다. 하나의 시스템 상에서 DEM의 구축과 종합적인 유역분석 및 체계적인 하천에 대한 지형학적 자료구축과정을 제시하였고, 국내 하천유역 및 하도망의 Geo DB와 연계되는 시스템으로 구성하였다. Thiessen 계수 계산 결과에 신뢰성을 제고하였고, CN값 구성과정은 국내 유역상황과 자료구축과정에 적합하도록 개발하였다. 또한, GRID를 이용한 하천에 대한 지형학적 자료구축 과정에 있어 보다 정확한 계산이 가능하도록 구성되었고, HyGIS-HMS 모형 및 HyGIS-RAS 모형에 대한 입력자료의 구성이 편리하도록 GUI를 이용한 입력자료 구성 모듈이 적용되었고, 이러한 입력자료가 파일로 구성이 되어 각 모형에 적용될 수 있는 형태로 구성되었다. 본 연구는 HEC-HMS 및 HEC-RAS를 이용한 HyGIS-HMS 모형과 HyGIS-RAS 모형을 개발함로써 국내유역에 대한 수리 수문 모델링시 사용자들이 하나의 GIS 엔진상에서 필요한 제반사항을 모두 구현할 수 있도록 구성되어, 엔지니어링 회사, 수자원기술자, 수자원관련 연구자들에 의해서 활용될 수 있을 것이다.이 보다 향상될 것이다.>에서 $0.0190m^3/s$로, 갈수량$(Q_{355})$$0.0176m^3/s$에서 $0.0189m^3/s$로 약 7%가 증가하는 것으로 분석되었다. 결과로부터 침투 트렌치는 저수량 및 갈수량을 증가시키는 보조수단이 될 수 있다.해 보았다. 뿐만 아니라 이와 관련된 수문요소기술을 확보할 수 있을 것이다.역의 물순환 과정을 보다 명확히 규명하고자 노력하였다.으로 추정되었다.면으로의 월류량을 산정하고 유입된 지표유량에 대해서 배수시스템에서의 흐름해석을 수행하였다. 그리고, 침수해석을 위해서는 2차원 침수해석을 위한 DEM기반 침수해석모형을 개발하였고, 건물의 영향을 고려할 수 있도록 구성하였다. 본 연구결과 지표류 유출 해석의 물리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는 거래전략은 존재하므로 이러한 전략을

  • PDF

Tsunami Force Acting on Coastal Structures (지진해일에 의해 해안구조물에 작용하는 힘)

  • Hong, Seong-Soo;Ha, Tae-Min;Cho, Yong-Sik
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.2
    • /
    • pp.171-177
    • /
    • 2011
  • Tsunami forces acting on coastal structures have not been relatively much paid attention by researchers. However, they should be appropriately reflected in design of coastal and harbor facilities. The temporary and permanent tsunami shelters have to be chosen to resist stably against unexpected tsunami forces. There have been only few numerical studies on the tsunami forces acting on coastal and harbor structures. In this study, a practical prediction of tsunami forces is carried out by using a two-dimensional numerical model.

Flow Characteristics and Riverbed Changes Simulation for the Upstream and Downstream Sections of Gongju Bridge (공주대교 상.하류구간에 대한 흐름특성과 하상변동 모의)

  • Shin, Kwang-Seob;Jeong, Sang-Man;Lee, Joo-Heon;Song, Pum
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.2
    • /
    • pp.119-127
    • /
    • 2008
  • The flow characteristics and the aspects of riverbed changes were analyzed for the upstream and downstream sections of Gongju Bridge. The upstream and downstream had complex topography, and the sections had the confluence of tributaries and several structures. In order to simulate the flow characteristics of the target sections, 1D HEC-RAS and 2D RMA2 were applied. As a result, the longitudinal water level of the target sections matched the results of simulated 1D and 2D samples. Also, 2D SED2D were applied to predict riverbed changes. As a result of the simulation, quantitative analysis was able to be performed for longitudinal riverbed changes from the sections of sudden change, bridges, the confluence of tributaries, and bends. Also, the distribution of riverbed changes on the main sections was in close relation to flow velocity. As a result of evaluating the sensitivity of SED2D, the concentration of suspended sediment, the thickness of sand beds, and the size of sand grains affected riverbed changes sensitively. These results will be used to apply the models of riverbed changes in the future.

3-D Dispersive Transport Model for Turbidity Plume induced by Dredging Operation (준설 탁도플륨의 3차원 이송확산 거동 모형)

  • Kang, See Whan;Kang, In Nam;Lee, Jung Lyul
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.5B
    • /
    • pp.557-562
    • /
    • 2006
  • In order to predict the dispersion of suspended sediment arising from dredging operation in port and navigation channel, a hybrid model for dispersive transport of turbidity plume was developed using Lee's(1998) hybrid method. Using hybrid modeling scheme advection-diffusion equation was solved by the forward particle-tracking method for advection process and by the fixed Eulerian grid method for diffusion process. To examine numerical model simulation in accuracy, the simulated results for 1-D, 2-D, and 3-D cases were compared with the analytical solutions including Kuo, et al's (1985) 3-D mathematical model. The model results were in a good agreement with the analytical solutions and mathematical model for the dispersion of turbidity plume.

Method of the Laboratory Wave Generation for Two Dimensional Hydraulic Model Experiment in the Coastal Engineering Fields: Case of Random Waves (해안공학분야에서 2차원 수리모형실험을 위한 실험파 설정방법: 불규칙파 대상)

  • Lee, Jong-In;Bae, Il Rho;Kim, Young-Taek
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.33 no.6
    • /
    • pp.383-390
    • /
    • 2021
  • The experiments in coastal engineering are very complex and a lot of components should be concerned. The experience has an important role in the successful execution. Hydraulic model experiments have been improved with the development of the wave generator and the advanced measuring apparatus. The hydraulic experiments have the advantage, that is, the stability of coastal structures and the hydraulic characteristics could be observed more intuitively rather than the numerical modelings. However, different experimental results can be drawn depending on the model scale, facilities, apparatus, and experimenters. In this study, two-dimensional hydraulic experiments were performed to suggest the guide of the test wave(random wave) generation, which is the most basic and important factor for the model test. The techniques for generating the random waves with frequency energy spectrum and the range for the incident wave height [(HS)M/(HS)T = 1~1.05] were suggested. The proposed guide for the test wave generation will contribute to enhancing the reliability of the experimental results in coastal engineering.

Flow Characteristics Induced by Shift and Modification of Submerged Weir at Han River Estuary (수중보 이설 및 변형에 따른 한강 하구 흐름 특성)

  • Baek, Kyong Oh;Yim, Dong Hee
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.2B
    • /
    • pp.109-119
    • /
    • 2011
  • In this study, the flow characteristics of Han River Estuary were investigated by using a two-dimensional numerical model according to the assumption of shift and modification of the Shingok submerged weir. The two-dimensional analysis has contributed to our understanding of the hydraulic effects induced by shift of the weir on the topography, especially wetlands. The tide and flow discharge of 2007 were adopted as an input data for the simulation. The tidal data contained both spring and neap tide, and the flow discharge condition was divided into monsoon and normal seasons. The boundaries of this study were Hangang Bridge, Tongil Bridge, and Yu island. The simulation results showed that influence area of seawater changed depending on the weir shift, and the water level at particular station fluctuated according to the condition of tide and flow discharge.

Linkage of Numerical Analysis Model and Machine Learning for Real-time Flood Risk Prediction (도시홍수 위험도 실시간 표출을 위한 수치해석 모형과 기계학습의 연계)

  • Kim, Hyun Il;Han, Kun Yeun;Kim, Tae Hyung;Choi, Kyu Hyun;Cho, Hyo Seop
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.332-332
    • /
    • 2021
  • 도시화가 상당히 이뤄지고 기습적인 폭우의 발생이 불확실하게 나타나는 시점에서 재산 및 인명피해를 야기할 수 있는 내수침수에 대한 위험도가 증가하고 있다. 내수침수에 대한 예측을 위하여 실측강우 또는 확률강우량 시나리오를 참조하고 연구대상 지역에 대한 1차원 그리고 2차원 수리학적 해석을 실시하는 연구가 오랫동안 진행되어 왔으나, 수치해석 모형의 경우 다양한 수문-지형학적 자료 및 계측 자료를 요구하고 집약적인 계산과정을 통한 단기간 예측에 어려움이 있음이 언급되어 왔다. 본 연구에서는 위와 같은 문제점을 해결하기 위하여 단일 도시 배수분구를 대상으로 관측 강우 자료, 1, 2차원 수치해석 모형, 기계학습 및 딥러닝 기법을 적용한 실시간 홍수위험지도 예측 모형을 개발하였다. 강우자료에 대하여 실시간으로 홍수량을 예측할 수 있도록 LSTM(Long-Short Term Memory) 기법을 적용하였으며, 전국단위 강우에 대한 다양한 1차원 도시유출해석 결과를 학습시킴으로써 예측을 수행하였다. 침수심의 공간적 분포의 경우 로지스틱 회귀를 이용하여, 기준 침수심에 대한 예측을 각각 수행하였다. 홍수위험 등급의 경우 침수심, 유속 그리고 잔해인자를 고려한 홍수위험등급 공식을 적용하여 산정하였으며, 이 결과를 랜덤포레스트(Random Forest)에 학습함으로써 실시간 예측을 수행할 수 있도록 개발하였다. 침수범위 및 홍수위험등급에 대한 예측은 격자 단위로 이뤄졌으며, 검증 자료의 부족으로 침수 흔적도를 통하여 검증된 2차원 침수해석 결과와 비교함으로써 예측력을 평가하였다. 본 기법은 특정 관측강우 또는 예측강우 자료가 입력되었을 때에, 도시 유역 단위로 접근이 불가하여 통제해야 할 구간을 실시간으로 예측하여 관리할 수 있을 것으로 판단된다.

  • PDF