• Journal of the Korean Solar Energy Society
• /
• v.28 no.5
• /
• pp.1-7
• /
• 2008

Flashed steam system is one of the important geothermal power production methods. In this paper, optimum operations and performances of single and double flash systems are presented. It is shown that double flash system can produce about 26.5% more power than single flash system. Temperature of geothermal water($T_R$) is the most important parameter in the geothermal system. Optimum single and double flash temperatures and net power produced with these optimum conditions are expressed as a function of $T_R$ in this study. Thus net power output from geothermal resources can be estimated with the results of this work. Condenser Temperature($T_{con}$) is also important and the net power production can be shown as a function of ($T_R-T_{con}$. Volume flow rate per unit power is also to be considered as the condenser temperature decreases.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.453-460
• /
• 2014

Fault injection attack is the process of attempting to acquire the information on-chip through inject artificially generated error code into the cryptographic algorithms operation (or perform) which is implemented in hardware or software. From the details above, the laser-assisted failure injection attacks have been proven particularly successful. In this paper, we propose an improved laser probing system for fault injection attack which is called the Dual-Laser FA tool set, a hybrid approach of the Flash-pumping laser and fiber laser. The main concept of the idea is to improve the laser probe through utilizing existing equipment. The proposed laser probe can be divided into two parts, which are Laser-I for laser cutting, and Laser-II for fault injection. We study the advantages of existing equipment, and consider the significant parameters such as energy, repetition rate, wavelength, etc. In this approach, it solves the high energy problem caused by flash-pumping laser in higher repetition frequency from the fiber laser.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.273-278
• /
• 2012

In this contribution, we design and implement an SPI hardware interface for the microprocessor to communicate with the MMC (Multi-Media Card) in an embedded system. Proposed architecture is compatible with the APB in AMBA bus architecture. Embedding OS in an embedded system means a big burden in terms of hardware and software ending up with performance decline. In this paper, we adopt the concept of SPI communication without using OS in the embedded system and implement in a form of FPGA chip. The designed SPI module was automatically synthesized, placed, and routed. Implementation was performed through the Altera FPGA and well operated at 25MHz clock frequency, which satisfied our target speed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.493-497
• /
• 2005

This paper is about the research of the User Agent implementation under wireless embedded environment, using SIP which is one of protocol components construct the VoIP system. The User Agent is made of the User Agent configuration block, the device thread block to control devices and the SIP stack block to process SIP messages. The device thread consists of the RTP thread and the sound lard device processing block. Futhermore, the SIP stack consist of the worker thread to process proxy events, the SIP transceiver and SIP thread to transfer and receive SIP messages. The H/W platform is a board included the Intel's XScale PXA255 processor, flash memory, SDRAM, Audio CODEC module and wireless LAN threough PCMCIA socket, furthermore a microphone and headphone is used by the audio 1/0. The system has embedded linux kernel 2.4.19. For embedded environment, the function of User Agent and SIP method is diminished. Finally, the resource of system could be reduced about $12.9\%$, compared to overall system resource, by minimizing peripherals control and excepting TCP.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.301-301
• /
• 2011

최근 고밀도 메모리 반도체의 재료와 빠른 응답을 요구하는 나노입자를 이용한 비휘발성 메모리 소자의 제작에 대한 연구가 활발히 진행되고 있다. 그에 따른 기존의 플래쉬 메모리가 가지는 문제점을 개선하기 위해서 균일하고 규칙적으로 분포하는 새로운 나노소재의 개발과 비휘발성, 고속 동작, 고집적도, 저전력 소자의 공정기술이 요구되고 있다. 또한 부유게이트에 축적되는 저장되는 전하량을 증가시키기 위한 새로운 소자구조 개발이 필요하다. 한편, 실리 사이드 계열의 나노입자는 금속 나노입자와 달리 현 실리콘 기반의 반도체 공정에서 장점을 가지고 있다. 따라서 본 연구에서는 화합물 중에서 비휘발성 메모리 장치의 전기적 특성을 향상 시킬 수 있는 실리사이드 계열의 바나듐 실리사이드(V3Si) 박막을 열처리 과정을 통하여 수 nm 크기의 나노입자로 제작하였다. 소자의 제작은 p-Si기판에 실리콘산화막 터널층(5 nm 두께)을 건식 산화법으로 성장 후, 바나듐 실리사이드 금속박막을 RF 마그네트론 스퍼터 시스템을 이용하여 4~6 nm 두께로 터널 베리어 위에 증착하고, 그 위에 초고진공 마그네트론 스퍼터링을 이용하여 SiO2 컨트롤 산화막층 (20 nm)을 형성시켰다. 여기서 V3Si 나노입자 형성을 위해 급속 열처리법으로 질소 분위기에서 800$^{\circ}C$로 5초 동안 열처리하여 하였으며, 마지막으로 열 기화 시스템을 통하여 알루미늄 전극(직경 200 ${\mu}m$, 두께 200 nm)을 증착하여 소자를 제작하였다. 제작된 구조는 금속 산화막 반도체구조를 가지는 나노 부유게이트 커패시터이며, 제작된 시편은 투사전자현미경을 이용하여 나노입자의 크기와 균일성을 확인했다. 소자의 전기적인 측정을 E4980A capacitor parameter analyzer와 Agilent 81104A pulse pattern generator system을 이용한 전기용량-전압 측정을 통해 전하저장 효과 및 메모리 동작 특성들을 분석하고, 열처리 조건에 따라 형성되는 V3Si 의 조성을 엑스선 광전자 분광법을 이용하여 확인하였다.