• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.67-77
• /
• 1994

From the Y3-3xNd3xAl5O12single crystals grown by the Czochralski technique, various types of defects were detected and 1) the reason of opical in homogeneous phases, 2) the mechanism of formation of the iridum metal inclusions accompanying bubbles, and 3) the mechanism of formation of the core and facet were analysed After preparing the wafers of the <111> growth parallel, defscts were observed by the polarising microscope using a photoelasic effect and then some images of stress-birefringence were compared to their etch Pits patterns.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.18-25
• /
• 2000

A two-color particle image velocimetry (PIV) has been developed for measuring two dimensional velocity flowfields and applied to a Mach 2.0 supersonic nozzle. This technique is similar to a single-color PIV technique except that two different color laser beams are used to solve the directional ambiguity problem. A green-color laser sheet (532 nm: 2nd harmonic beam of YAG laser) and a red-color laser sheet (619 nm: output beam from YAG pumped Dye laser using Rhodamine 640) are employed to illuminate the seeded particles. A high resolution (3060${\times}$2036) digital color CCD camera is used to record the particle positions. This system eliminates the photographic-film processing time and subsequent digitization time as well as the complexities associated with conventional image shifting techniques for solving directional ambiguity problem. The two-color PIV also has the advantage that velocity distributions in high speed flowfields can be measured simply and accurately by varying the time interval between two different laser beams due to its high signal-to-noise ratio and thereby less requirement of panicle pair numbers for a velocity vector in one interrogation spot. The velocity distribution in the Mach 2.0 supersonic nozzle has been measured and the over-expanded shock cell structure can be predicted by the strain rate field. These results are compared and analyzed with the schlieren photograph for the velocity distributions and shock location.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.93-100
• /
• 2006

The lateral soil movement in soft grounds undergoing improvement with application of vertical drains is analyzed on the basis of monitoring data at three fields, in which fifty six monitoring sites are located. Based on the investigations, the criterions are suggested to predict the lateral soil movement. In order to predict the lateral soil movement in the improved soft grounds by using the dimensionless parameter R suggested by Marche & Chapuis (1974), it is desirable that the maximum lateral displacement in the soft ground below the toe of embankment should be applied to calculate R instead of the lateral displacement at the toe of embankment. The lateral soil movement may increase rapidly, if the safety factor of slope is less than 1.4 in case of high ratio of H/B (Thickness of soft ground/Embankment width) such as 1.15 or is less than 1.2 in case of low ratio of H/B such as 0.05. Also, the graph suggested by Tschebotarioff (1973), which illustrates the relationship between the maximum height of embankments and the undrained shear strength of soft grounds, can be applied to the evaluation for the possibility of the lateral soil movement due to embankments on soft grounds.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.12
• /
• pp.1184-1190
• /
• 2012

This study is focused on the experimental analysis of the noise induced by phase change of refrigerant at the entrance of capillary tube. The refrigerant is usually two-phase condition when it flowed into the capillary tube. At the entrance of capillary tube, the phase condition of refrigerant is formed by sub-cool control. If it has sufficient sub-cool temperature, all of the vapor refrigerants turned to liquid, which means there is only liquid. Otherwise, the gas is coexisted. Based on this theory, we experiment on each case by changing sub-cool temperature using refrigerant-supplying equipment. The noise level is measured for each case and compared.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.586-588
• /
• 2000

본 논문은 전자 패키징의 방열 성능을 개선하기 위하여 초소형 히트 파이프를 제작하고 열전달 성능을 시험한 결과를 보여준다. IC 칩이 점점 고성능화되고 고집적화되어 감에 따라 발열 문제가 대두되는데, 이 열은 전도만으로는 충분히 소산시킬 수 없고 패키징 표면에 별도의 장치를 장착하는 것은 시스템 소형화의 장애 요소가 된다. 따라서, 고성능 칩 개발을 위한 선결 과제로 고성능 초소형 냉각 장치가 요구되고 있다. 히트파이프는 밀봉된 파이프 내의 2상 유동과 상변화 잠열을 이용하여 열원으로부터 히트 싱크로 열을 효과적으로 전달하는 열교환 장치이다. 본 논문에서는 전자 패키징 내에 집적화할 수 있도록 초소형 히트 파이프 어레이를 제작하여 그 성능을 시험한 결과 증발부의 온도가 $12.1^{\circ}C$ 감소됨을 보인다.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1027-1032
• /
• 1997

본 연구에서는 용사용WC-17%Co 복합분말을 분무건조법으로 제조하고 열처리 온도(85$0^{\circ}C$, 100$0^{\circ}C$, 115$0^{\circ}C$, 130$0^{\circ}C$)에 따른 조립분말의 미세구조, 입도분포, 유동도, 및 결정상변화를 고찰하였다. 분무건조상태의 입형은 구형이었으며, 입도분포, 평균입자크기, 유동성은 각각 20.6-51.7$\mu\textrm{m}$, 27.2$\mu\textrm{m}$, 0.26 sec/g 이었다. 열처리에 의하여 조립분말은 치밀화되어 130$0^{\circ}C$ 열처리 후에는 입도분포와 평균입자크기가 각 각 6.9-37.9$\mu\textrm{m}$과 17.8$\mu\textrm{m}$로 감소하였으며, 유동성은 0.12 sec/g로 향상되었다. 열처리중에 WC와 Co의 상화확산에 의하여 Co$_{6}$W$_{6}$C및 Co$_{3}$W$_{3}$C이 생성되었으며, 두 상이 나타나는 임계온도는 115$0^{\circ}C$이었다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.165-174
• /
• 2005

고압전류가 흐르는 송전탑이 주거 밀집지역 인근에 설치되거나 송전탑과 가까운 곳에 아파트가 건설되면서 주민들이 한전을 상대로 손해배상 청구소송을 추진하는 등 전자파 피해에 따른 민원이 끊이지 않고 있다. 이와 같은 문제에 대해 해결책을 제시하기 위해서는 송전선 주변 전자파의 실체에 대해 과학적이고 객관적인 조사를 거쳐 국민에게 납득할 수 있는 대안을 제시하는 것이 선행되어야할 작업이다. 그러나 현재 전자파 데이터는 조사 지점만의 단편적인 측정치를 보여주는 수준에 머물러 있어 전자파 확산 등 광역적인 분포 추이에 대한 시각적인 정보를 입수하는 데 상당한 한계가 있다. 따라서 본 연구에서는 GIS기반의 공간 모델링 기법을 활용하여 거리와 전류를 토대로 분포되는 송전선 주변의 전자파 시뮬레이션 기법을 제안하고자 한다. 이와 같은 문제에 대해 대안을 제시하고자, 지역주민이 일상생활에서 접하고 있는 지역의 지도(건물, 도로망 등)를 전자파 유동에 관한 이론에 의거하여 3차원 상에서 전자파 시뮬레이션을 수행하였다. 전자파 시뮬레이션 결과를 검증하기 위해 사용한 실측 데이터는 인천광역시 서구 가정2동에 위치한 봉수 초등학교의 학생들에게 전자파 측정장비를 부착하도록 하여 확보하였다 송전선에서 전자파 방출에 개입하는 거리와 전류의 세기에 의거하여 전자파의 분포를 예측하였으며 실측 데이터와 이론적인 데이터를 비교하여 상관성을 평가했다. 통상 전자파 조사과정은 지도에 표기된 조사지점을 일일이 확인하는 등 모든 측정 작업을 수작업에 의존하고 있다. 따라서 DB구축에 시간이 많이 소요되고 정확도도 많이 떨어질 수밖에 없어 다양한 조건으로 방대한 자료를 공간상에서 검색하는 것 자체가 불가능하였다. 전자파의 분포를 그래픽정보로 가공하여 광역적인 전자파 변화 추이를 풍부한 시각 정보로 디스플레이 하는 것도 어려웠다. 또한 수작업으로 인한 실수도 많이 발생하고 그에 따른 교정 작업도 복잡하였다. 본 연구에서는 송전선에서 방출되어지는 전자파의 이론적인 데이터와 실측 데이터의 상관성에 따른 분석 결과를 가지고 실측 데이터 없이 GIS 기반의 3D 시뮬레이션에 의거하여 전자파의 공간적인 가시화를 수행할 수 있었다. 본 전자파 시뮬레이션 기법이 실무에 이용될 경우, 일반인이 전자파의 분포에 대한 전문지식을 습득할 필요 없이, 검색하고자 하는 지역과 송전선, 전철 등 각종 전자파의 발생 공간 객체를 선택하여 실생활과 관련된 전자파 정보에 예측할 수 있어, 대민 환경정보 서비스 질의 개선측면에서 획기적인 계기를 마련할 것으로 사료된다.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.224-232
• /
• 1999

Latent heat storage system using micro-encapsuled phase change material is effective method for floor heating of house and building. The temperature profile in capsule block and flow rate of hot water are important parameters for the development of heat storage system. In the present study, a mathematical model based on 3-D, non-steady state, Navier-Stokes equations, scalar conservation equations and turbulence model ($\kappa$-$\varepsilon$), is used to predict the temperature profiles in capsule and the velocity vectors in hot water pipe. The multi-block grids and fine grids embedding are used to join the circle in hot water pipe and square in capsule block. The phase change process of the capsule is quite complex not only because the size of phase change material is very small, but also because phase change material is mixed with the cement to form thermal storage block. In calculation, it's assumed that the phenomena of phase change is limited only the thermal properties of phase change material and the change of boundary is not happened in capsule. The purpose of this study is to calculate the temperature profiles in capsule block and velocity vectors in hot water pipe using the numerical calculation. Two kinds of thermal boundary condition were considered, the first (case 1) is the adiabatic condition for the both outside surfaces of the wall, the second (case 2) is the case in which one surface is natural convection with atmosphere and another surface is adaibatic. Calculation results are shown that the temperature profile in capsule block for case 1 is higher than that for case 2 due to less heat loss in adaibatic surface. Specially, in the domain of near Y=0, the difference of temperature is greater in case 1 than in case 2. The detailed experimental data of capsule block on the temperature profile and the thermal properties such as specific heat and coefficient of heat transfer with the various temperature are required to predict more exact phenomena of heat transfer.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.99-108
• /
• 2014

One year long time-series current data were obtained at two stations (K1 and K2) located in the Usan Trough in the area north of Ulleungdo in the East Sea from September 2006. The observed data reveal enhanced seafloor flows in both stations with variabilities of about 20 days which is possibly governed by the topographic Rossby wave. After February 2007, strong flow in the upper layer in St. K1 appears throughout the mooring period and this is due to the passage of the warm eddy comparing with satellite sea surface temperature data. During this period, no significant correlation between the current in the upper layer and those in two deep layers is shown indicating the eddy does not affect flows in the deep ocean. It is also observed that the flow direction rotates clockwise with depth in both stations except for the upper of the K1. This implies that the deep flow does not parallel to the isobaths exactly and it has a downwelling velocity component. The possibility of the flow from the Japan Basin to the Ulleung Basin across the Usan Trough is not evidenced from the data.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.2
• /
• pp.169-178
• /
• 2011

The dispersion of a pollutant in a turbulent boundary layer has been described in this study by using a two-dimensional lattice Boltzmann method (LBM) and the Smagorinsky sub-grid-scale (SGS) model. The scalar transport equation corresponding to the pollutant concentration is adopted; the pollutant is considered to be in a continuous phase. The pollutant source is classified as ground-level source (GLS) and elevated-point source (ES). Air velocity and particle concentration profile for the pollutant are compared with the respective results and profiles obtained in the experiments of Fackrell and Robins (1982) and Raupach and Legg (1983). The numerical results obtained in this study, i.e., the simulation and the experimental data for the mean flow velocity profiles and the pollutant concentration profiles, are in good agreement with each other.