• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.353-359
• /
• 2012

The identification of effective root zone would clarify dynamics of plant available water and soil water balance. Using the relationship between soil properties and electrical resistivity (ER) the purpose of this research is to identify soil zone affected by a plant root activity using electrical resistivity tomography (ERT) technique. Four plastic containers were prepared for two different soil textures (clay and sandy loam) and one container for each texture was selected for planting four corn seedlings (Zea mays L.) and the others were prepared for the blank. For ERT monitoring, we prepared 0.8 m plastic sticks with 17 electrodes installed with 5 cm space. The Ministing (AGI Inc., Texas) instrument for electrical resistivity measurement and semi-auto converter of electrode arrangement were set up for dipole-dipole array. During 2 months of the corns growing, ERT monitoring was made 3 to 4 days after the irrigation practice. Despite of the same amount water supplied into soils, two textures showed very different apparent resistivity values due to different clay content. The apparent electrical resistivity is consistently lower in clay loam comparing to sandy loam soil implying that plant root does not significantly alter the overall trend of resistivity. When plant root system, however, is active both soils with plants showed 2-7 times higher electrical resistivity and higher coefficient variation than soils without plant, implying the effect of root system on the resistivity, in which may caused by. This result suggests plant root activities regulating the soil water dynamics mainly control the variation of electrical resistivity over soil textural difference. Therefore the identification of water uptake zone would highly be correlated to plant root activities, thus ERT will be feasible approach to identify spatial characteristics of a plant root activity.

• Korean Journal of Pharmacognosy
• /
• v.39 no.3
• /
• pp.199-202
• /
• 2008

A high performance liquid chromatographic (HPLC) method for the simultaneous determination of hesperidin and glycyrrhizin was established for the quality control of traditional herbal medicinal preparation, Pyungwi-san (PWS). Separation and quantification were successfully achieved with a Waters XTerra RP18 column ($5{\mu}m$, 4.6 mm I.D. ${\times}$ 150 mm) by gradient elution of a mixture of acetonitrile and water containing 0.03% phosphoric acid (pH 2.03) at a flow rate of 1.0 ml/min. The diode-array UV/vis detector (DAD) was used for the detection and the wavelength for quantification was set at 230 nm. The presence of hesperidin and glycyrrhizin in this extract was ascertained by retention time, spiking with each authentic standard and UV spectrum. All four compounds showed good linearity $(r^2>0.995)$ in a relatively wide concentration ranges. The R.S.D. for intra-day and inter-day precision was less than 7.0% and the limits of detection (LOD) were less than 60 ng. The mean recovery of each compound was 99.0-105.6% with R.S.D. values less than 4.0%. This method was successfully applied to the determination of contents of hesperidin and glycyrrhizin in three commercial products of PWS. These results suggest that the developed HPLC method is simple, effective and could be readily utilized as a quality control method for commercial PWS products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.6
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.228-236
• /
• 2004

Retinal ganglion cells transmit visual scene as an action potential to visual cortex through optic nerve. Conventional recording method using single intra- or extra-cellular electrode enables us to understand the response of specific neuron on specific time. Therefore, it is not possible to determine how the nerve impulses in the population of retinal ganglion cells collectively encode the visual stimulus with conventional recording. This requires recording the simultaneous electrical signals of many neurons. Recent advances in multi-electrode recording have brought us closer to understanding how visual information is encoded by population of retinal ganglion cells. We examined how ganglion cells act together to encode a visual scene with multi-electrode array (MEA). With light stimulation (on duration: 2 sec, off duration: 5 sec) generated on a color monitor driven by custom-made software, we isolated three functional types of ganglion cell activities; ON (35.0$\pm$4.4%), OFF (31.4$\pm$1.9%), and ON/OFF cells (34.6$\pm$5.3%) (Total number of retinal pieces = 8). We observed that nearby neurons often fire action potential near synchrony (< 1 ms). And this narrow correlation is seen among cells within a cluster which is made of 6～8 cells. As there are many more synchronized firing patterns than ganglion cells, such a distributed code might allow the retina to compress a large number of distinct visual messages into a small number of ganglion cells.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.90-95
• /
• 2003

This study was carried out to identify of C3G (cyanidin-3-glucoside) from mulberry fruits and quantify with different varieties. C3G of mulberry fruits was extracted with 1％ HCl-MeOH and purified with open column (5${\times}$90cm) which filled with Amberlite IRC-50 ion exchange resin. The $\lambda$max ranges of the purified C3G on UV/vis spectrum were 516nm and 280nm. Also, molecular weight of C3G from mulberry fruits by LC-Mass was determined as 449. From above results, we concluded that anthocyanin pigment of mulberry fruits was C3G only. The cyanidin-3-glucoside (C3G) was separated and quantified by High Performance Liquid Chromatography (HPLC) system using a Nova-Pack C$\_$18/ column. Mean content of the 35 tested accessions was 0.89％. Also fruity characteristics as well as C3G content to select the desirable mulberry varieties for the production of fruit were researched and analyzed. We selected three suitable varieties such as 'Susungppong', 'Kangsun', and 'Jeolgokchosaeng(Chungpuk)'.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.471-477
• /
• 2004

Oldenlandia diffusa is a Chinese medicinal herb with antitumor activity capable of suppressing the growth of some cancer cell lines. Oleanolic acid and ursolic acid are triterpenoid compounds that exist in Oldenlandia diffusa. Recently, these have been noted for anti-inflammatory, anti-cancer, and hepato-protective effects. Application of both plant growth regulators, 2,4-D and kinetin, was found to be essential for the initiation of callus and suspension cells. Leaf blades of Oldenlandia diffusa was transformed into callus on Schenk and Hildebrandt medium supplemented with 0.5 mg/L 2,4-D and 0.1 mg/L kinetin, while optimum initiation condition for suspension cells of Oldenlandia diffusa was determined to be 0.75 mg/L 2,4-D and 0.1 mg/L kinetin. Chromatographic separation of oleanolic acid from its derivatives was achieved using Rexchrom S5-100-ODS column. Analytical conditions for oleanolic acid were determined as follows: flow rate at 1.0 mL/min, UV length at 200 nm and mobile phase of $80\%$ acetonitrile and $20\%$ water. Production of secondary metabolites was found to be increased by the treatment with elicitors or signal transducers. The maximum production of oleanolic acid was 99.6 mg/L in cultures with 0.5 mM salicylic acid. It is 1.74 times higher than that of control.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.247-255
• /
• 2008

A coded aperture camera has been developed to improve the signal-to-noise ratio (SNR) while keeping the spatial resolution of a pinhole gamma camera. The purpose of this study was to optimize a coded aperture camera and to evaluate its possibility for thyroid imaging by Monte Carlo simulation. A clinical gamma camera, a pinhole collimator with 1.0 mm hole diameter, and a $79{\times}79$ modified uniformly redundant array (MURA) mask were designed using GATE (Geant4 Application for Tomographic Emission). The penetration ratio, spatial resolution, integral uniformity and signal-to-noise ratio (SNR) were simulated and evaluated as a function of the mask thickness. The spatial resolution of the coded aperture camera was consistent with the various mask thickness, SNR showed a maximum value at 1.2 mm mask thickness and integral uniformity was improved by increasing mask thickness. Compare to the pinhole gamma camera, the coded aperture camera showed improved SNR by a factor of 30 while keeping almost the same spatial resolution. In this simulation study, the results indicated that high spatial resolution and ultra-high SNR of the thyroid imaging are feasible using a coded aperture camera.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.153-163
• /
• 2010

In this paper a frequency response analysis using Krylov subspace-based model reduction and its design sensitivity analysis with respect to design variables are presented. Since the frequency response and its design sensitivity information are necessary for a gradient-based optimization, problems of high computational cost and resource may occur in the case that frequency response of a large sized finite element model is involved in the optimization iterations. In the suggested method model order reduction of finite element models are used to calculate both frequency response and frequency response sensitivity, therefore one can maximize the speed of numerical computation for the frequency response and its design sensitivity. As numerical examples, a semi-monocoque shell and an array-type $4{\times}4$ MEMS resonator are adopted to show the accuracy and efficiency of the suggested approach in calculating the FRF and its design sensitivity. The frequency response sensitivity through the model reduction shows a great time reduction in numerical computation and a good agreement with that from the initial full finite element model.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.566-574
• /
• 2015

Yellow or transparent fruit peel color is caused by the accumulation or lack of naringenin chalcone (NG, C) in fruit peel and determines the red or pink appearance of tomato fruit, respectively. NGC biosynthesis is regulated by the SlMYB12 gene of the Y locus on chromosome 1, and DNA markers derived from SlMYB12 would be useful for marker-assisted selection (MAS) of tomato fruit color. To develop a gene-based marker, 4.9 kb of the SlMYB12 gene including a potential promoter region was sequenced from the red-fruited (YY) line 'FCR' and pink-fruited (yy) line 'FCP'. Sequence alignment of these SlMYB12 alleles revealed no sequence variations between 'FCR' and 'FCP'. To identify SlMYB12-linked single nucleotide polymorphisms (SNPs), 'FCR' and 'FCP' were genotyped using a SolCAP Tomato SNP array and CAPS markers (CAPS-456, 531, 13762, and 38123) were developed from the four SNPs (solcap_snp_sl_456, 531, 13762, and 38123) most closely flanking the SlMYB12. These CAPS markers were mapped using $F_2$ plants derived from 'FCR' ${\times}$ 'FCP'. The map positions of the fruit peel color locus (Y) were CAPS-13762 (0 cM) - 456 (11.09 cM) - Y (15.71 cM) - 38123 (17.82 cM) - 531 (30.86 cM), and the DNA sequence of SlMYB12 was physically anchored in the middle of CAPS-456 and CAPS-38123, indicating that fruit peel color in domesticated tomato is controlled by SlMYB12. A total of 64 SolCAP tomato germplasms were evaluated for their fruit peel color and SNPs located between solcap_snp_sl_456 and 38123. Seven SNPs that were detected in this interval were highly conserved for pink-fruited accessions and specific to transparent fruit peel traits, as depicted by a phenetic tree of 64 accessions based on the seven SNPs.