• Korean Journal of Animal Reproduction
• /
• v.3 no.2
• /
• pp.42-49
• /
• 1979

This experiment was carried out to clarify the practical use of farrowing induction with PGF2$\alpha$ in swine production. Total 320 heads of pregnant sow were used and the effects of administration time, dosage, administration method of PGF2$\alpha$ and parity of sow on the farrowing induction were investigated. The results obtained in this experiment were summarized as following: 1. Total 228 heads out of 240 head which were treated with PGF2$\alpha$ in order to farrow artificially were farrowed normally. the rate of farrowing induction was 95%. 2. Several farrowing symptoms such as restlessness, bloody eye, udder swelling, milk discharge and nest building for piglets were observed in a few minutes after administration of PGF2$\alpha$. 3. Artifical parturition of sow treated with PGF2 at the 113rd, 112nd, 111st, 110th and 109th day of pregnancy were induced 17.0$\pm$7.3, 24.2$\pm$7.0, 31.3$\pm$14.7, 43.0$\pm$12.2 and 62.2$\pm$15.7 hours after administration, and the duration of pregnancy was significantly (P<0.01) shortened by PGF2$\alpha$ anministration. 4. Minimum amount of PGF2$\alpha$ per head for effective farrowing inductin was considered to be more than 5mg, and the more the amount, the shorter time needed for farrowing induction was resulted. 5. Effective farrowing induction was obtained from the sow treated with PGF2$\alpha$ via vulvomucous rather than from the sow treated via intromuscular, and intervals from PGF2$\alpha$ administration to farrowing in 4th-6th farrowed sows were shorter than those of 1st-3rd farrowed sows but no significant difference was observed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.249-258
• /
• 2007

Experiments were conducted with aims to (1) estimate the biomass yield potential, (2) characterize the biomass and digestible dry matter production, and (3) reveal the characteristic seedling establishment of a whole crop rice variety, Nogyangbyeo, in dry- and wet-seeded rice. Maximum aboveground total biomass of Nogyangbyeo was 18 t $ha^{-1}$ in dry-seeded rice and 20 t $ha^{-1}$ in wet-seeded rice. Biomass yield potential of Nogyangbyeo was lower than that of Dasanbyeo. Comparatively, Nogyangbyeo was straw-dependent and Dasanbyeo was grain-dependent for biomass accumulation. Percentage of digestible dry matter (DDM) was higher in panicles than straw. Digestible dry matter yield was determined mainly by biomass yield rather than DDM percentage. Number of seedling establishment in Nogyangbyeo was $73m^{-2}$ in dry-seeded rice and $109m^{-2}$ in wet-seeded rice. Poor seedling establishment of dry-seeded Nogyangbyeo in the field condition was the result of low seed germination under low temperature and poor seedling emergence by deep sowing. Low seedling emergence rate of Nogyangbyeo was attributed mainly to slow elongation growth by slow leaf development and partly to mesocotyl and 1st internode lengths, not to genetically defined leaf length. The slow elongation growth of Nogyangbyeo was the same even in the high daily mean temperature of $24^{\circ}C$. Results suggest DDM yield in rice can be improved simply by increasing biomass and whole crop rice varieties should be adaptable to direct-seeding.

• Entomological Research
• /
• v.48 no.6
• /
• pp.550-558
• /
• 2018

To develop a system for the mass production of Protaetia brevitarsislarvae (Pbl), this study analyzed the oviposition characteristics of third instar Pbl through successive rearing and cold treatments. In the first generation, females laid 50 eggs each on average, and spawned higher numbers of eggs for the first 5 days but then fewer after this. However, all of the $2^{nd}$-generation females that were produced through the successive rearing of eggs from the $1^{st}$ generation did not spawn. When test insects (TI) were raised at $32^{\circ}C$, their $mean{\pm}SE$ pupal period and emergence rate were $28.4{\pm}1.9$ days and 87%, respectively. However, most individuals raised in cold treatments ($5^{\circ}C$ and $-5^{\circ}C$) without a pre-cooling period did not survive. Individuals exposed to a pre-cooling period, however, had a 7-10 days longer pupal period than those raised at $32^{\circ}C$, and their emergence rate (90%) was slightly higher. Different cold treatment temperatures ($0^{\circ}C$, $3^{\circ}C$, or $5^{\circ}C$) and periods (30 or 60 days) were tested in further experiments. The experimental group kept for 30 days at $0^{\circ}C$ and $3^{\circ}C$ had the shortest pupal period of all, and emergence rates exceeded 90% in most groups. With respect to the number of eggs spawned by the second generation females after cold treatments, the experimental groups held in cold treatments at $5^{\circ}C$ for 30 and 60 days were found to spawn the most eggs. Consequently, the experimental group kept at $5^{\circ}C$ for 30 days was the most effective set of conditions tested during the entire breeding period.

• Journal of Environmental Science International
• /
• v.22 no.7
• /
• pp.863-871
• /
• 2013

Dielectric discharges are an emerging technique in environmental pollutant degradation, which that are characterized by the production of hydroxyl radicals as the primary degradation species. For practical application of the plasma reactor, reactor that can handle large amounts of water are needed. Plasma research to date has focused on small-scale water treatment. This study was carried out basic study for scale-up of a single DBD (dielectric barrier discharge) plasma reactor. The degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) was used as a performance indicator of multi-plasma reactor. The experiments is divided into two parts: design parameters [effect of distance of single plasma module (1~14 cm), arrangement of ground electrode (single and multi), rector number (1~5) and power number (1~5)]; operation parameter [effect of applied voltage (60~220 V), air flow rate (1~5 L/min), electric conductivity of solution ($1.4{\mu}S/cm$, deionized water)~18.8 mS/cm (addition of NaCl 10 g/L) and pH (5~9)]. Considering the electric stability of the plasma reactor, optimum spacing between the single plasma module was 2 cm. Multi discharge electrodes - single ground electrode array was selected. Combination of power 3-plasma module 5 was the optimal combination for maximum RNO degradation. The optimum 1st voltage and air flow rate for RNO degradation were 180 V and 4 L/min, respectively. The pH and conductivity of the solution was not influencing the RNO degradation.

• Agribusiness and Information Management
• /
• v.9 no.1
• /
• pp.7-17
• /
• 2017

Agricultural water management has gained enormous attention in the developing world to alleviate poverty, reduce hunger and conserve ecosystems in small-scale production systems of resource-poor farmers. The story of food security in the $21^{st}$ century in India is likely t o be closely linked to the story of water security. Today, the water resource is under severe threat. The past experiences in India in general and in Andhra Pradesh in particular, indicated inappropriate management of irrigation has led to severe problems like excessive water depletion, reduction in water quality, water logging, salinization, marked reduction in the annual discharge of some of the rivers, lowering of ground water tables due to pumping at unsustainable rates, intrusion of salt water in some coastal areas etc. Considering the importance of irrigation water resource efficiency, Krishna Western Delta (KWD) of Andhra Pradesh was purposively selected for this in depth study, as the farming community in this area are severely affected due to severe soil salinity and water logging problems and hence, adoption of different water saving crop production technologies deserve special mention. It is quite disappointing that, canals, tube wells and filter points and other wells could not contribute much to the irrigated area in KWD. Due to less contribution from these sources, the net area irrigated also showed declining growth at a rate of -6.15 per cent. Regarding paddy production, both SRI and semi-dry cultivation technologies involves less irrigation cost (Rs. 2475.21/ha and Rs. 3248.15/ha respectively) when compared to transplanted technology (Rs. 4321.58/ha). The share of irrigation cost in Total Operational Cost (TOC) was highest for transplanted technology of paddy (11.06%) followed by semi-dry technology (10.85%) and SRI technology (6.21%). The increased yield and declined cost of cultivation of paddy in SRI and semi-dry production technologies respectively were mainly responsible for the low cost of production of paddy in SRI (Rs. 495.22/qtl) and semi-dry (Rs. 532.81/qtl) technologies over transplanted technology (Rs. 574.93/qtl). This clearly indicates that, by less water usage, paddy returns can be boosted by adopting SRI and semi-dry production technologies. Both the system-level and field-level interventions should be addressed to solve the issues/problems of water management. The enabling environment, institutional roles and functions and management instruments are posing favourable picture for executing the water management interventions in the State of Andhra Pradesh in general and in KWD in particular. This facilitates the farming community to harvest good crop per unit of water resource used in the production programme. To achieve better results, the Farmers' Organizations, Water Users Associations, Department of Irrigation etc., will have to aim at improving productivity per unit of water drop used and this must be supported through system-wide enhancement of water delivery systems and decision support tools to assist farmers in optimizing the allocation of limited water among crops, selection of crops based on farming situations, and adoption of appropriate alternative crops in drought years.

• Journal of Information Technology Applications and Management
• /
• v.23 no.2
• /
• pp.263-277
• /
• 2016

Recently, 3D printing technology has been considered as a core applicable technology because it brings many improvements such as the development of medical technology, medical customization, and reducing production cost and shortening treatment period. This research suggests a market prediction framework for medical 3D printing business. As an immature market situation, it is important to control some uncertainty for market prediction such as a customers' conversion rate. So we adopt decision making tree (DMT) model which used to choose an optimal decision making among diverse pathway. Among medical industries this paper just focuses on dentistry business. For predicting a 5 year period trend expected market size, we identified some replaceable denture procedure by 3D printing, collected related data, controlled uncertain variables. The result shows that medical 3D printing business could be a market of 28.2 billion won at 1st year and in the end of fifth year it could become on a scale of 61.1 billion won market.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.189-209
• /
• 1998

Food resources have been supplied more and more by crop land expansion, technological Improvement for higher crop yield, establishment of irrigation system, and input of fertilizers, chemicals and others, to sustain a world population increase currently about 6 billion. Food demand will be significantly increased in the 21st century due to population increases of 90 million per year and more consumption of meat with per capital income increase. But food production increase will be limited by difficulty of crop/irrigation land expansion and small or decreasing effectiveness of fertilizer use. Development of new techniques for higher yield per ha is only one way to meet future food demand increase. Optimistic prospect for food demand/supply balance was reported by FAO until 2010, and IFPRI until 2020. However, Worldwatch Institute warned world food supply will be less than expected demand by 500 million tons of cereal grains in 2030. It is necessary to establish a national plan to meet expected worldwide shortage of food resources in 21 century. What planning should be under taken to meet the upcoming century of food shortage in Korea whose food self-sufficiency rate is only $30{\%}$. It is recommended that (1) keep paddy field area as much as 1,100 thousand ha, (2) expansion of barley and wheat cultivation on all paddy area in winter season, (3) continue development of new technology to get international superiority of food resources produced in Korea, (4) expand nationwide the importance of food security under the current financial crisis encountered In Korea, and for food security in the future unified Korean peninsula.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.469-472
• /
• 2002

Solid state fermentation was performed for the production of entomopathogenic fungus Metarhizium anisopliae HY-2 using wheat bran media containing rice bran. Fungal growth in a solid state fermentation system was estimated by viable cell count, spore count, and mycelial biomass. It was used chemical method measuring N-acetyl-glucosamine (chitin) content for estimating of mycelial biomass. In static flask culture, viable cell reached 2.40 ${\times}$ $10^8$ cfu/g at 23 days of culture at $27^{\circ}C$ and then mycelial biomass was 41.59 mg/g. Specific growth rate(${\mu}$ max) was 0.0418 $h^{-1}$ between 3 and 9 days when estimated by viable cell count and was 0.00976 $h^{-1}$ between 9 and 17 days when N-acetylglucosamine content was measured. Viable cells reached 1.12 ${\times}$ $10^8$ cfu/g in polypropylene-bag at 28 days of culture at $27^{\circ}C$. Formulated microbial pesticide containing M. anisopliae HY-2 were tested their bio-activity against Chestnut Brown Chafer (Adoretus tenuimaculatus). The protection rate of the liquid culture showed 13 ${\sim}$ 26 % with 1st to 3rd instar, and spore suspension of M. anisopliae HY-2 showed 56 ${\sim}$ 64%. Conidia produced by large scale solid-state fermentation showed 20 ${\sim}$ 27 % activity 60 ${\sim}$ 64 % with M. anisopliae HY-2.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1749-1754
• /
• 2003

The study was undertaken to see the effect of elevated feeding during pre-partum or pre- as well as post-partum period on the productive and reproductive performance of crossbred cows. The experiment lasted for 60 d pre-partum to 120 d post-partum. Eighteen dry pregnant crossbred cows divided into three equal groups were fed either as per NRC feeding standard (C) or 20% above NRC during 60 d pre-partum ($T_1$) or fed 20% above NRC during both 60 d pre-partum to 120 d post-partum ($T_2$) period. During prepartum period body weight gain was significantly ($p{\leq}0.05$) higher in $T_1$ and $T_2$ groups than that of control group. The animals fed at higher plane of nutrition ($T_1$ and $T_2$) took significantly lesser time for complete relaxation of pelvic muscles, act of calving and for expulsion of placenta than that of control group. Moreover, such cows delivered 2 to 3 kg heavier calves as compared to normal fed dams. During post-partum period, the average daily milk yield was significantly higher in $T_2$ group than that in $T_1$ and control groups. The peak yield was significantly higher in $T_2$ group, it took longer time to reach peak production but it was more persistent in this group as compared to $T_1$ and control groups. Average milk fat, solids-not-fat (SNF) and total solids were significantly higher in $T_1$ and $T_2$ groups as compared to control group. Body weight losses incurred during early lactation were not even compensated by end of 4th month of lactation in C and $T_1$ groups whereas the animals in $T_2$ group gained 2.0 kg. The 1st post-partum estrus and conception rate were better in high fed groups ($T_1$ and $T_2$) than that of control group. The returns over feed cost of milk production were higher in $T_2$ group followed by $T_1$ and control groups indicating the advantage of elevated feeding during pre- and post-partum periods.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.21 no.4
• /
• pp.225-232
• /
• 2001

In order to identify the optimum seeding rate of Jeju barnyard grass (Echinochloa crusgalli var. fiurnentacea(Roxb) Wight), 15, 20, 25, 30, 35 and 40 kilograms per a hectare were planted in April 16, 2000, respectively. The growth characterization, the yield and chemical composition were then investigated in June 28(1st cutting) and August 30(2nd cutting), 2000. According to increasing the seeding rate, plant height(155.5 to 162 cm), the yield of fresh forage(61 to 73 MT/ha), dry matter forage(11.9 to 16.9 MT/ha), crude protein(0.9 to 1.6 MT/ha), and TDN(6.1 to 9.7 MT/ha) were gradually increased until the seeding furrow, 35 kg/ha. In 40 kg/ha of seeding furrow, however, those results were decreased than that of the former seeding furrow. The contents of crude protein(7.4 to 10.4%), ether extract(3.3 to 5.2%), nitrogen free extract(46.4 to 47.8%), and TDN(52.1 to 60.4%) were also similar to those of the plant heights and the each yield excepted the seeding furrow, 40 kg/ha. Namely, the each results about the contents increased in 40kg/ha of seeding furrow. According to increasing the seeding rate, the stem diameter, number of leaves, number of withering leaves, and fresh weight were gradually decreased. The contents of crude fiber(30.3 to 27.5%) and crude ash(12.7 to 9.0%) were also decreased These results showed that the optimum seeding rate for the best of the feed production was the seeding furrow, 35 kg/ha.