• Korean Journal of Agricultural Science
• /
• v.11 no.2
• /
• pp.284-294
• /
• 1984

Effects of orifice diameter, operating angle and swirl chamber distance were examined to study a reasonable distribution pattern on the maximum available travel distance in the triple nozzle system. The results of the study were as follows; 1. Discharge rate was increased with increase of orifice diameter, and a quadratic line for the 1st nozzle and linear lines for the 2nd or the 3rd nozzle. 2. The operating angle of $15^{\circ}$ had showed the maximum available travel distance, and 17m in orifice diameter of 3.0mm and operating pressure of $24.5{\times}10^5pa$ ($25Kg/cm^2$). 3. Nozzle setting methods (reference Table 6.) for improvement of uniformity of deposit distribution were varied depending on the size of orifice diameter of the 1st nozzle, nevertheless coefficients of uniformity were improved about 6 percents. 4. Adjustment of the swirl chamber distance of the 2nd nozzle could improve the minimum area of about 6m from the triple nozzle.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2124-2132
• /
• 1999

Given a graph G=(V,E), Ld(2,1)-labeling of G is a function f : V(G)$\longrightarrow$[0,$\infty$) such that, if v1,v2$\in$V are adjacent, $\mid$ f(x)-f(y) $\mid$$\geq$2d, and, if the distance between and is two, $\mid$ f(x)-f(y) $\mid$$\geq$d, where dG(,v2) is shortest distance between v1 and in G. The L(2,1)-labeling number (G) is the smallest number m such that G has an L(2,1)-labeling f with maximum m of f(v) for v$\in$V. This problem has been studied by Griggs, Yeh and Sakai for the various classes of graphs. In this paper, we discuss the upper-bound of ${\lambda}$ (G) for a chordal graph G and that of ${\lambda}$(G') for a permutation graph G'.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.7-10
• /
• 2004

This paper investigated the possibility of quality restoration of deteriorated concrete caused by long distance delivery using chemical admixtures such as superplasticizer. AE agent and retarding agent. According to test results, long distance delivery lead to reducing fluidity and air content markedly, while setting time accelerated. Quality restoration agent(QRA) was made by combining super- plasticizer. AE agent and retarding agent with the proportion of 1:0.0025:0.1. It was confirmed that deteriorated concrete achieved quality restoration with the level of target slump, air content and setting time without strength loss when using QRA with proper amount.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.373-376
• /
• 2007

As a part of automatic car parking, this paper have devised the distance measurement algorism using stereo vision system which measure between object and parking lot. In this simulation, laser pointer is used for detecting edge of designated object and real distance is measured by searching the position of laser pointer and measuring the distance. Which are 1 / 1.5 / 2 / 2.5 / 3m and adjusted correction had applied in order for use in car parking system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.3
• /
• pp.215-226
• /
• 1999

The experimented rangefinder consist of sets of V/A-Code GPS and sets of L1 C/A-code & carrier phase receivers connected by two spread spectrum radio modems in order to measure relative range and bearing between two ship antennas by real time, comparing and analyzing accuracy of both GPS receivers at the fix point on the land by means of executing zero baseline test by C/A code and by carrier phase as well as measuring distance range 5m, 10m, 15m between each other receivers. The results from the measurement of relative range and bearing are as follows as ;1. According to the results from zero baseline test, the average error by C/A-code receiver is less than 0.1m, which proves theories from published books but when each GPS receivers track different satellites, the range accuracy error becomes up to 100m by means of S/A. Because of this sudden wide range error, rangefinder is not appropriate at relative range measurement without additional modification of the algorism of the GPS receiver itself.2. According to relative range measurement by Carrier Phase and zero baseline test at static condition, the range error is less than 3.5cm in case that it passes more than 5 minutes after GPS sets can track simultaneously more than 6 satellites. Its main reason is understood that the phase center of antenna is bigger than geodetic antenna.3. When range measurement of two receivers from 5m, to 10m to 15m, the each range error is 0.340m, 0.190m, 0.011m and each standard variation is 0.0973m, 0.0884m, 0.0790m. The range error and standard variation are in inverse proportion to distance between two receivers. 4. L1 Carrier Phase GPS generally needs 5 minutes to fix and during this ambiguity search, the relative range and bearing angle is shown to be various.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.1-9
• /
• 2002

This study was performed to investigate vibration generated from machines that were used at factories and construction works. Vibrations were measured at three points in a straight line based on distance from the vibration sources, and analyzed to assess the vibration bevels. The average vibration level of factory machines was 65.4dBV at 2m, and that of construction machines was 74.0dBV at 5m. Vibration attenuations was 4.0~8.2dBV by double distance. All such data were applied to gain coefficients of attenuation equations for predicting vibration level by distance from the vibration sources. Data recorded on tapes were analyzed to understand the characteristics of frequency because these characteristics are important factors to design a Plan for installing the vibration-Proof devices. Finally, considering results from these analysis, assessment, and prediction, the methods for reducing vibration generated from machines were discussed.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.49-55
• /
• 1993

This study describes the accuracies of position fixes observed by the DGPS systems for the purpose of obtaining the utility basic data in the fishery and oceanography observation field. The circling sail experiments around a reterence point using the DGPS were made in water level point of National Fisheries University of Pusan and on the sea in Yongho day located on the southeast of that university. The main results are as follows ; 1) The number of the usable satellites in position fixing were all eighteen, SV 2, 3, 11-21, 23-26 and SV 28 etc. Each satellites could be observed for average seven hours a day, and position fixing was found to be always possible except about thirty minutes a day. 2) In the standard fixed position, the radius of 95% probability circle and the shifted distance between the position fixes by the DGPS and true position were respectively 5.7m, 0.9m. In the above case those of ordinary GPS was respectively 48.8, 54.2m. Therefore, the accuracy of the position fixes by DGPS was shown much higher the ordinary GPS. 3) At land, the shifted distance between the center of traces in the circling sail experiment of 15m ra-dius by DGPS and the reference position amounted to 5.5m and observed radius of circling traces was 17.5m. other than 15m. At sea, that distance the center of traces in circling experiment of 20m radius by the DGPS and the reference position amounted to 3.6m and observed radius of circling traces was 19.7m, other than 20m. Therefore, the utility of the circling experiment to obtain the accurate position fixes by the DGPS was found to be very high.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.239-252
• /
• 1998

Based on forestry inventory data and various informations, this study was conducted to analyze the silvicultural activities by distance classes from forest road and to evaluate their effects in the area of Mt. Gari managed by Chunchon Regional Office of Northern Forest Management Office. The results were summarized as follows; 1) Most harvesting practice(67.9%) was done within 500m from forest roads, in the order of Pumgul, Saorang, and Kongkol forest road. And thinning practice was not related to the distance from forest road, produced $440.6m^3$, 35.7% of total thinning volume within 1,000m width along the forest roads. 2) Planting of 530,461 seedlings, 66.8% of total planting stock, in 176.9ha, 66.6% of total area within 1,000m from forest road, and supplementary planting of 46,243 seedlings was done in 15.4ha, 42.9% of total area within 500m from forest road. Areas and numbers of seedlings of two planting practices were in the order of Pumgul and Byungatur forest road. 3) Tending operation was done in 330.0ha, 60.3% of total area within 500m from forest road, and pre-commercial thinning was done in 693.6ha, 71.2% of total area. Areas of intermediate cutting practices were in the order of Pumgul, Korkol, and Saorang forest road.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.65-70
• /
• 2020

This paper describes hierarchically stratifying and analyzing haplotrees of haplogroups from haplotypes on the Y and X chromosomes of human cells for genetic and Korean traditional and genealogical trees. The specific region is Chungcheong province, and the Y-DNA of the paternal lines has high frequency of O3a∗ and O2b∗ in the O group, and the mtDNA of the maternal line has a relatively high frequency of D∗ and M∗ in the L3 group. Each combination of these constructs the family tree of the father lines and mother lines. Genetic distances using Nei's standard genetic distance, are very close relatives of less than 0.1 and close relatives of 0.1 to 0.8. Provided, the distance is more than 1.0, it is difficult to estimate relatives. STR has the identified kinship, and SNP has the personal genetic identification. A scientific stratification of the Korean genealogical tree is created by the three factors.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.139-145
• /
• 2015

To investigate seasonal (summer and fall) daily movement of Brachymystax lenok tsinlingensis that inhabit in upper part of the Nakdong River, we attached radio tags to seven individuals (summer: BL1-2; fall: BL3-7) and monitored them at an interval of 2 h. The survey results revealed that the average movement distance per day (m) (${\pm}SD$) of B. l. tsinlingensis was $182.4{\pm}79.2m$, and most of the individuals migrated within 1 km as their habitat boundary. The maximum movement distance per day (m) and the home range (m) during summer season were $550.5{\pm}75.5m$ and $649{\pm}53m$, respectively, compared to $283.8{\pm}55.1m$ and $186{\pm}32m$ during fall season. From these findings, it can be inferred that B. l. tsinlingensis exhibits seasonal changes in the distance of daily movement; however, it generally covers short distances without leaving the habitat boundaries during both seasons. The seasonal daily movement of B. l. tsinlingensis established in this study is expected to be useful in preserving their population.