• 대한치과교정학회지
• /
• 제13권2호
• /
• pp.147-154
• /
• 1983

This experiment was performed to study the effect of $PGE_2$ on the bone resorption at the tooth movement by orthodontic force. The experimental animals were the Sprague-Dawley strain rats. The orthodontic force was applied by the insertion of separating clamp made of 0.014' (0.356mm) wire to the interproximal site between the 2nd and the 3rd upper right molars. In experiment I, $0.2{\mu}g,\;0.4{\mu}g,\;0.8{\mu}g,\;and\;1.0{\mu}g\;PGE_2$ were locally injected at the submucosa near the 2nd molar of the maxilla each. The effect was detected by the count of the number of osteoclasts appeared at the compressed surface of interradicular bone. In experiment II, 1.0 mg/kg indomethacin (a specificc inhibitor of prostaglandin synthetas.) was subcutaneously injected. The effect was examined by the count of the number of cateoclasts appeared at the compressed surface of interradicular bone. The obtained results were follows; 1. The number of osteoclasts on the compressed surface of the interradicular bone increased in proportion to the increased dosage of $PGE_2$ administered. The number of osteoclasts increased significantly at the administration of $0.8{\mu}g\;and\;1.0{\mu}g\;PGE_2$ in contrast to the control (P<0.05). 2. The administration of 1.0 mg/kg indomethacin decreased the number of osteoclasts at the compressed bony surface significantly (P<0.01).

• 한국분무공학회지
• /
• 제1권2호
• /
• pp.16-23
• /
• 1996

In case of a high-speed D.I. diesel engine. the injected fuel spray is unavoidable that the impinging on the wall of piston cavity and in this case the geometry of piston cavity has a great influence on the atomization structure and air flow fields. In the field of combustion and in many other spray applications, there are clear evidence of correlation between spray structure and emission of pollutants. Ordinary, the combustion chamber of driving engine have unsteady turbulent flow be attendant on such as the change of temperature, velocity and pressure. So the analysis of spray behavior is difficult. In this study, a single spray was impinged on each cavity wall at indicated angle in a quiescent atmosphere at room temperature and pressure, as being the simplest case, and 3 types of piston cavity such as Dish, Toroidal and Re-entrant type was tested for analyzing the influence of cavity geometry. And hot wire probe was used for analyze non-steady flow characteristics of impinging spray, and to investigate the behavior of spray, the aspects of concentration c(t), standard deviation $\sigma(t)$ and variation factor (v.f.) was measured with the lapse of time.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.46-54
• /
• 1995

The cold cracking susceptibility of a variety of weld metals deposited by GMAW with several kinds of commercial solid wires for high strength-toughness steel was investigated. G-BOP test and LB-TRC test were carried out to study the effects of preheat, chemical composition and hydrogen level on the weld metal cold cracking. The results obtained are as follows. 1) 10% CPT obtained by G-BOP test was the most valuable criteria for evaluating the cold cracking susceptibility of weld metals compared with percentage of cracking at room temperature and crack free temperature, and it had good correlation with the results of LB-TRC test. 2) Cold cracking susceptibility of weld metals was high in the row of MG100A, MG100C, MG100D and MG100B. Welds deposited with MG130 and MG80 showed similar icidents of cracking with MG100C and MG100B respectively, even though their strength levels were different. 3) Diffusible hydrogen level in weld metals which has good relation with hydrogen content in wire itself was the most critical factor for controlling the cold cracking susceptibility of weld metal.

• Nuclear Engineering and Technology
• /
• 제55권7호
• /
• pp.2534-2546
• /
• 2023

Gas-cooled space reactor, which adopts He-Xe gas mixture as working fluid, is a better choice for megawatt power generation. In this paper, thermal-hydraulic characteristics of He-Xe gas mixture in 2×2 rod bundle wrapped with helical wires is numerically investigated. The velocity, pressure and temperature distribution of the coolant are obtained and analyzed. The results show that the existence of helical wires forms the vortexes and changes the velocity and temperature distribution. Hot spots are found at the contact corners between helical wires and fuel rods. The highest temperature of the hot spots reach 1600K, while the mainstream temperature is less than 400K. The helical wire structure increases the friction pressure drop by 20%-50%. The effect extent varies with the pitch and the number of helical wires. The helical wire structure leads to the reduction of Nusselt number. Comparing thermal-hydraulic performance ratios (THPR) of different structures, the THPR values are all less than 1. It means that gas-cooled space reactor adopting helical wires could not strengthen the core heat removal performance. This work provides the thermal-hydraulic design basis for He-Xe gas cooled space nuclear reactor.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.209-214
• /
• 2014

지능형 모바일 단말기의 급증과 IPTV등 다양한 멀티미디어 부가 서비스의 증가로 IMS(IP Multi-Media Subsystem)가 유/무선 통합 제어 망으로 각광을 받고 있다. IMS의 구조는 인터넷 프로토콜(IP) 기반의 통신망에서 기존 음성 서비스는 물론 SIP를 이용한 다양한 멀티미디어 부가 서비스를 제공하기 위해 세션의 설정 변경 및 해제를 수행하도록 NGN에서 세션 제어계층으로 정의 되었다. 현재는 IPTV 유선전화서비스 사업자 등에서도 폭넓게 채택되어 기존 소프트스위치 기반의 인터넷전화 서비스 플랫폼을 대체하고 있고 특히, 최근에는 이동통신서비스인 4G LTE의 확산에 따라 관련 시장이 빠르게 성장하고 있다. 따라서 본 논문에서는 1,000 회선급 가입자 회선을 수용 할 수 있는 고속의 메인 Processor와 기존 표준 SIP 프로토콜을 사용하는 SIP 단말과 IMS Core와 연동 할 수 있고 다양한 멀티미디어 서비스를 제공할 수 있는 SIP 게이트웨이를 설계하고 구현하였다.

• 한국연초학회지
• /
• 제15권2호
• /
• pp.167-173
• /
• 1993

Pirimiphos - methyl was fogged in a tobacco warehouse to determine the proper dose rate, Small wire cages, containing adults and larvae of cigarette beetle (Lasiodema senicorne F.) were put at different altitude in the warehouse of which the holding capacity was about 250m3. At recommended dose rate, 0.4ml/m3(25% ai), it brought about 100% mortality of adults and 98.8% -100% mortality of larvae. When the dose rate was reduced to about half the recommended one, 97.6 and 96.4% mortality could still be obtained against adults and larvae, respectively. The number of the beetles monitored by sex - pheromone trap was greatly reduced after the fogging in the warehouses at 4 geographic places in Korea. When the warehouses were ventilated for one hour immediately after the fogging done for 48 hours, workers could not detected any opposing smell in the warehouses. And panel members responded positively that there was no negative effect on the taste of the cigarettes made of the fogged tobacco. Although the residue of the chemical was detected from the cigarettes in 4 of 5 cases, the residue was 1.1-1.3$\mu\textrm{g}$/20 cigarettes except for one case from which 3.3$\mu\textrm{g}$/20 cigarettes residue was detected. The relatively low residue is about l/450-1/150 of the WHO/FAO tolerant level.

• Biomolecules & Therapeutics
• /
• 제13권3호
• /
• pp.165-173
• /
• 2005

The main aim of this study was to investigate stress related activities of ginsenosides and their action mechanism. Control group and ginsenoside supplemented groups were exposed to stress while no-stress group was not done. Animals of each group (n=$8\~10$) were orally administerd 100 mg red ginseng extract (R-G), or 10 mg ginsenosides/kg body weight once a day. Animals were given materials for 5 days without stress, and then were given supplements for 5 days with restraint and electroshock stress. Mice were given materials for 5 days for experiments on anti-fatigue effect. After loading final stress, stress-related behavioral changes of experimental animals were examined and plasma corticosterone levels were measured. R-G and ginsenoside $Rb_{1}$ supplementation partially blocked the stress effects on locomotion and elevated plus-maze test in rats and mice. They also partially blocked stress induced behavioral changes such as freezing, smelling, face-washing, rearing behavior in rats. R-G and $Rb_{1}$ decrease adrenal gland size and plasma corticosterone level, which were increased by stress in rats. R-G increased enduring time on the Rota rod, cold water and horizontal wire, but $Rb_{1}$ didn't. Effects of $Rb_{1}$ on plusmaze test were inhibited by administration of flumazenil. These results suggest that $Rb_{1}$ is the main antistress principle in ginseng and it's effect is modulated by GABAnergic nervous system.

• Advances in nano research
• /
• 제13권2호
• /
• pp.199-206
• /
• 2022

We present the high-brightness large-area 10.1" in-cell polarizer display panel integrated with a wire grid polarizer (WGP) and metal reflector, from the initial design to final system development in a commercially feasible level. We have modeled and developed the WGP architecture integrated with the metal reflector in a single in-cell layer, to achieve excellent polarization efficiency as well as brightness enhancement through the light recycling effect. After the optimization of key experimental parameters via Taguchi method, the roll nanoimprint lithography employing a flexible large-area tiled mold has been utilized to create the 90 nm-pitch polymer resist pattern with the 54.1 nm linewidth and 5.1 nm residual layer thickness. The 90 nm-pitch Al gratings with the 51.4 nm linewidth and 2150 Å height have been successfully fabricated after subsequent etch process, providing the in-cell WGPs with high optical performance in the entire visible light regime. Finally we have integrated the WGP in a commercial 10.1" display device and demonstrated its actual operation, exhibiting 1.24 times enhancement of brightness compared to a conventional film polarizer-based one, with the contrast ratio of 1,004:1. Polarization efficiency and transmittance of the developed WGPs in an in-cell polarizer panel achieve 99.995 % and 42.3 %, respectively.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.202-209
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, 6 kinds of steel wires, 4 kinds of combined steel wires, 8 kinds of combined steel wires with screen meshes were used. The results are summarized as follows; Among 6 kinds of steel wires $({\phi}0.7\;mm,\;{\phi}0.9\;mm,\;{\phi}1.2\;mm,\;{\phi}\;1.6\;mm,\;{\phi}2.0\;mm,\;{\phi}2.7\;mm),$ the two steel wires $({\phi}0.7\;mm,\;{\phi}0.9\;mm)$ showed the highest in effectiveness. Among 4 kinds of combined steel wires $({\phi}l.6-{\phi}l.2\;mm,\;{\phi}1.2-{\phi}l.6\;mm,\;{\phi}0.9-{\phi}l.2\;mm,\;{\phi}l.2-{\phi}0.9\;mm),\;the\;{\phi}1.2-{\phi}0.9\;mm$ showed the highest in effectiveness. Among 8 kinds of combined steel wires with screen meshes $(150-{\phi}0.9\;mm,\;150-{\phi}l.2\;mm,\;{\phi}0.9\;mm-150,\;{\phi}1.2\;mm-150,\;150-{\phi}0.9\;mm-150,\;150-{\phi}1.2\;mm-150,\;150-{\phi}l.6\;mm-150,\;150-{\phi}2.0\;mm-150),\;the\;{\phi}l.2\;mm-150$ showed the highest in effectiveness.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.504-511
• /
• 2011

Nano-sized Sn powder was prepared by pulsed wire evaporation method. The Sn powder and carbon black were charged in jar and ball milled. The milling time was varied with 10 min., 1h, 2h, and 4h, respectively. The milled powders were dried and the shape and size were observed by FE-SEM. Nano-sized Sn powders were plastic-deformed and agglomerated by impact force of balls and heat generated during the SPEX milling. The agglomerated Sn powder also consisted of many nano-sized particles. Initial discharge capacities of milled Sn electrode powders with carbon powder were milled for 10 min., 1h, 2h, and 4h were 787, 829, 827, and 816 mAh/g, respectively. After 5 cycle, discharge capacities of Sn electrode powders with carbon powder milled for 10 min., 1h, 2h, and 4h decreased as 271, 331, 351, and 287 mAh/g, respectively. Because Sn electrode powders milled for 2h constist of uniform and fine size, the cyclability of coin cell made of this powders is better than others.