• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.780-788
• /
• 1989

An experimental study has been performed to investigate the process from nonequilibrium state to equilibrium state in redeveloping turbulent boundary layer beyond separation-reattachment using pitot tube and hot-wire anemometer. The model sued in the experiment has the form of a backward facing step which is assembled by a two-dimensional 4:1 half elipse and a plate. Measurements are carried out up to a distance of about 50 step height downstream of the step, where the reattachment observed at about x/h=6.5. The profiles of the shape factor H the Clauser parameter G and the coefficient of friction $C^{f}$ exhibited the characteristics similar to those of the equilibrium turbulent boundary layer from x/h=25, and the profiles of the trubulent quantities did from x/h=35. However, the wake region of the boundary layer does not seem to recover the equilibrium turbulent boundary layer even at x/h=50. By considering the distributions of the intermittency factor it has been noted that the turbulence structure changes gradually from a mixing layer to a turbulent boundary layer along downstream direction after reattachment. This becomes clearer as we analyse the one-dimensional energy spectra and the dissipation energy spectra which are measured and caculated at various downstream positions after the backward facing step.p.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.73-73
• /
• 2017

Pyroprocessing at KAERI (Korea Atomic Energy Research Institute) consists of pretreatment, electroreduction, electrorefining and electrowinning. SFR (Sodium Fast Reactor) fuel is prepared from the electrowinning process which is composed of LCC (Liquid Cadmium Process) and Cd distillation et al. LCC is an electrochemical process to obtain actinides from spent fuel. In order to recover actinides inert anodes such as carbon material are used, where chlorine gas ($Cl_2$) evolves on the surface of the carbon material. And, stainless steel (SUS) crucible should be installed in large-scale electrowinning system. Therefore, the effect of chlorine on the SUS material needs to be studied. LiCl-KCl-$UCl_3$-$NdCl_3$-$CeCl_3$-$LaCl_3$-$YCl_3$ salt was contained in 2 kinds of electrolytic crucible having an inner diameter of 5cm, made of an insulated alumina and an SUS, respectively. And, three kinds of electrodes such as cathode, anode, reference were used for the electrochemical experiments. Both solid tungsten (W) and LCC were used as cathodes. Cd of 45 g as the cathode material was contained in alumina crucibles for the deposition experiments, where the crucible has an inner diameter of 3 cm. Glassy carbon rod with the diameter of 0.3 cm was employed as an anode, where shroud was not used for the anode. A pyrex tube containing LiCl-KCl-1mol% AgCl and silver (Ag) wire having a diameter of 0.1cm was used as a reference electrode. Electrodeposition experiments were conducted at $500^{\circ}C$ at the current densities of $50{\sim}100mA/cm^2$. In conclusion, Fe ions were produced in the salt during the electrodeposition by the reaction of chlorine evolved from the anode and Fe of the SUS crucible and thereby LCC system using SUS crucible showed very low current efficiencies compared with the system using the insulated alumina crucible. Anode shroud needs to be installed around the glassy carbon not to influence surrounding SUS material.

• Journal of Radiation Protection and Research
• /
• v.4 no.1
• /
• pp.14-20
• /
• 1979

For accurate and easily shielding irregular shaped organ, its minimized penumbra region and a low melting point alloy 'Lead Y' and synchronizing instrument have been developed. The 'Lead Y' is the quaternary eutectic alloy and it is composed of Lead 30.0% Tin 11.5% Bismuth 48 5% Cadmium 10.0% The density of its at $22^{\circ}C$ is $9.8g/cm^3$ and the melting temperature has $40^{\circ}C\;to\;68^{\circ}C$. The thickness of 'Lead Y' for perfect shielding of Co-60 gamma ray and LINAC 10MeV x-ray is 6cm and 7cm respectively. The 'Lead Y' shielding block is casted directly on the styrofoam from which is cut with hot wire of synchronizer device. The special features and advantages of the Lead Y shielding block could be summarized as follows; 1. The shielding block for radiotherapy is rapidly processed only with boiling water and styrofoam. 2. It is not injure one's health and not danger of a fire, because of not generating of any metals vapor and evil smelling. 3. It is very effective to minimize secondary penumbra for the protection of healthy tissue from unnecessary ionizing radiation regardless of the magnification source to skin distance. 4. The HVL of the Lead Y is 1.2cm for Co-60 gamma ray and it's shielding effect is almost same as the pure lead block. 5. The hardness of Lead Y is 1.5 times higher than lead block. 6. It's reavailability is higher than lead block and then one block of Lead Y is reavailable about 30 to 40 times. 7. It is usefull for shielding of x-ray, gamma ray, beta-ray, electron and neutron radiation. 8. The materials for Lead Y are easy to acquire with reasonable price and tractable.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2014

A large amount of acidic waste solution is generated from the practical electrokinetic decontamination equipments for the remediation of soil contaminated with uranium. After filtration of uranium hydroxides formed by adding CaO into the waste solution, the filtrate was recycled in order to reduce the volume of waste solution. However, when the filtrate was used in an electrokinetic equipment, the low permeability of the filtrate from anode cell to cathode cell due to a high concentration of calcium made several problems such as the weakening of a fabric tamis, the corrosion of electric wire and the adhension of metallic oxides to the surface of cathode electrode. To solve these problems, sulfuric acid was added into the filtrate and calcium in the solution was removed as $CaSO_4$ precipitate. A decontamination test using a small electrokinetic equipment for 20 days indicated that Ca-removed waste solution decreased uranium concentration of the waste soil to 0.35 Bq/g, which is a similar to a decontamination result obtained by distilled water.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.131-142
• /
• 2002

The Langmuir adsorption isotherms of the under-potentially deposited hydrogen (UPD H) and the over-potentially deposited hydrogen (OPD H) at the poly-Pt/0.5M $H_2SO_4$ and 0.5 M LiOH aqueous electrolyte interfaces have been studied using cyclic voltammetric and ac impedance techniques. The behavior of the phase shift $(0^{\circ}{\leq}{-\phi}{\leq}90^{\circ})$ for the optimum intermediate frequency corresponds well to that of the fractional surface coverage $(1{\geq}{\theta}{\geq}0)$ at the interfaces. The phase-shift method, i.e., the phase-shift profile $({-\phi}\;vs.\;E)$ for the optimum intermediate frequency, can be used as a new electrochemical method to determine the Langmuir adsorption isotherms $({\theta}\;vs.\;E)$ of the UPD H and the OPD H for the cathodic $H_2$ evolution reactions at the interfaces. At the poly-Pt/0.5M $H_2SO_4$ aqueous electrolyte interface, the equilibrium constant (K) and the standard free energy $({\Delta}G_{ads})$ of the OPD H are $2.1\times10^{-4}$ and 21.0kJ/mol, respectively. At the poly-Pt/0.5M LiOH aqueous electrolyte interface, K transits from 2.7(UPD H) to $6.2\times10^{-6}$ (OPD H) depending on the cathode potential (E) and vice versa. Similarly, ${\Delta}G_{ads}$ transits from -2.5kJ/mol (UPD H) to 29.7kJ/mol (OPD H) depending on I and vice versa. The transition of K and ${\Delta}G_{ads}$ is attributed to the two distinct adsorption sites of the UPD H and the OPD H on the poly-Pt surface. The UPD H and the OPD H on the poly-Pt surface are the independent processes depending on the H adsorption sites themselves rather than the sequential processes for the cathodic $H_2$ evolution reactions. The criterion of the UPD H and the OPD H is the H adsorption sites and processes rather than the $H_2$ evolution reactions and potentials. The poly-Pt wire electrode is more efficient and useful than the Pt(100) disc electrode for the cathodic $H_2$ evolution reactions in the aqueous electrolytes. The phase-shift method is well complementary to the thermodynamic method rather than conflicting.

• Korean Journal of Poultry Science
• /
• v.46 no.4
• /
• pp.215-221
• /
• 2019

This study investigated the effects of various stocking densities on the growth performance of Korean native ducks. Twelve hundred day-old ducklings were reared for 50 days in a duck house (windowless, plastic wire-floor pen). Two weeks later, 852 of these ducks (350±30 g) were selected for at least 80% uniformity per stocking treatment (six treatments, four replications/treatment, depending on a stocking density of 4~9 birds m^-2). Experimental diets were corn-soybean-based and broiler ducks were grouped based on age [0~21 days of age (CP 21%, ME 2,900 kcal/kg) and 21~50 days of age (CP 17%, ME 3,100 kcal/kg)]. Body weight (BW) did not significantly differ among different aged treatment groups (P>0.05); however, uniformity decreased with higher stocking densities (P<0.05). Feed intake and feed conversion ratio of ducks aged 42~50 days significantly decreased in the T4-6 treatments compared with the T1-3 treatments (P<0.05). In all experimental periods, BW gain was not significantly different among treatments, but feed intake decreased significantly as the stocking density increased (P<0.05), and feed conversion ratio was significantly different among six treatments with stocking density (P<0.05). In conclusion, we found that the stocking density of Korean native ducks in a plastic wire-floor pen was approximately 7 birds m^-2 in consideration of productivity and uniformity.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.1 s.60
• /
• pp.15-26
• /
• 1998

p53 is the most frequently mutated gene in female breast cancer tissues and the prognosis of breast cancer could be changed by mutation of the gene. This study was performed to examine risk factors for breast cancer subtypes classified by p53 mutation and to investigate the roles of p53 gene mutation in carcinogenesis of breast cancer. The study subjects were 81 breast cancer patients and 121 controls who were matched to cases 1:1 or 1:2 age, residence, education level and menopausal status. All the subjects were interviewed by a well-trained nurse with standardized questionnaire on reproductive factors, and wire asked to fill the self-administrative food frequency questionnaire. p53 gene mutation in the cancer tissue was screened using polymerase chain reaction (PCR)-single strand conformational polymorphism (SSCP) method. Mutation type was identified by direct sequencing of the exon of which mobility shift was observed in SSCP analysis. Mutations were detected in p53 gene of 25 breast cancer tissues. By direct sequencing, base substitutions were found in 20 cancer tissues (10 transition and 10 transversion), and frame shift mutations in 5 (4 insertions and 1 deletion). For the whole cases and controls, risk of breast cancer incidence decreased when the parity increased, and increased when intake amount of total calory, fat, or protein increased. Eat and protein were statistically significant risk factors for breast cancer with p53 mutation. For breast cancer without p53 mutation, protein intake was the only significant dietary factor. These results suggest that causes of p53 positive breast lancer would be different from those of p53 negative cancer, and that dietary factors or related hormonal factors induce mutation of p53, which may be the first step of breast cancer development or a promoter following some unidentified genetic mutations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.2
• /
• pp.161-166
• /
• 2016

This study was designed to investigate whether or not onion peel extract can lower blood lipid levels in rats exposed to cigarette smoke (CS) extract with a high-fat diet. Initially, male Sprague-Dawley rats were housed individually in a stainless steel, wire-bottomed cage with free access to AIN-93G diet. Rats were weight-matched and assigned to the following five groups: 1) control rats (CT) fed standard AIN-93G diet alone, 2) control rats exposed to CS extract (CT+CS), 3) high-fat group (HF) fed standard AIN-93 diet supplemented with 3% lard and 0.2% cholesterol, 4) high-fat group exposed to CS extract (HF+CS) fed standard AIN-93 diet supplemented with 3% lard and 0.2% cholesterol plus CS extract, and 5) high-fat plus onion peel (OP) extract group exposed to CS extract (HF+CS+OP) fed standard AIN-93 diet supplemented with 3% lard, 0.2% cholesterol, and onion peel extract (20 mg/17 g diet) plus CS extract. Using this feeding protocol, all animals completely consumed their respective diets throughout the 6 week duration. Blood was collected via the orbital sinus at weeks 0, 3, and 6, following overnight food deprivation. OP extract feeding resulted in significant reductions in blood triglyceride, total cholesterol, and non-HDL-cholesterol. Further, serum activities of aspartate transaminase and alanine transaminase were significantly reduced by OP extract at 6 weeks. These results provide clear evidence that onion peel extract has a profound inhibitory effect on blood lipids in rats exposed to CS extract. These findings suggest that OP extract can be used as an effective means in alleviating the serum lipid concentration after CS exposure.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.401-409
• /
• 1997

The purpose of this study was to analize the initial stress distribution around apex and the alveolar bone of the upper anterior teeth when applying intrusive force by the use of utility arthwire, Burstono 3-piece infusion archwire, and 'J' hook headgear which is usually used in clinital practice. By the use of the polarization plate, initial stresses were analized when 80g and 150g forte applied. The results were as follows. 1. With the utility archwire, moderate levels of stress were evenly distributed on the apical areas of the anterior teeth and concentrated on the apical areas of the first molars. 2. With the Burstone's 3-piece intrusion archwire, moderate levels of stress were evenly distributed on the apical areas of the anterior and posterior teeth. 3. With the 'J' hook headgear, severe levels oi stress were widely distributed on the alveolar bone and apical areas of the upper anterior teeth, and concentrated on the apical area between the central and the lateral incisors. Especially, weak levels of stress appeared along the periodontal ligament space of all teeth.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.85-95
• /
• 2001

The purpose of this study was to evaluate the material for fixed type retainer, allowing physiologic tooth movement. and proper remodeling or periodontal tissue during retention period. The Present study was Performed to observe the histologic changes of periodontal tissue after application of different types of fixed type retainer after orthodontic tooth movement in young adult dogs. For this study, 4 young adult dogs were used as a experimental animal and experimental group was divided into three groups : experimental group 1 contained right side maxillayy third incisors and canines, experimental group 2 contained contralateral teeth of same animals, and control group contained mandibular premolars. And each dogs were applied the 4 different types of fixed type retainer to experimental group 1. The experimental teeth were ligated on the Sentalloy closed coil $spring^{\circledR}$(Tomy Co., Japan) from maxillary third incisors and canines and applied orthodontic force at initial 200gm-forced during 1 week. All the experimental animals were sacrificed on the 3rd week after the orthodontic teeth movement and then the specimens were taken, fixed in formalin, embeded in parafin, sectioned $6-8{\mu}m$ in thickness and stained with Hematoxylin-Eosin staining, and Masson's trichrome staining method. Examined under the light microscopy The following results were observed. 1. There were observed that decreased infiltration of giant tells in pressure side and increased the new bone forming in tension side on the specimen of 6-stranded 0.0195' $Respond^{\circledR}$(G&H Co., U.S.A.) group. Periodontal ligament fibers were much compressed or elongated in 3-stranded 0.018', 0.020' $Dentaflex^{\circledR}$(Dentarum Co., Germany), and Superbond $C&B^{\circledR}$(Sun Medical Co., Japan) groups. 2. In experimental group 1, necrotic bone inside the alveolar bone of pressure side, forming of the sharpey's fiber in osteoid tissue, and remodeling of the periodontal ligament were observed in all animals. 3. In experimental group 2, it was observed that the amount of bone resorption was equal or decreased in pressure side, and increased new bone forming and significantly decreased infiltration of giant cell than the experimental group 1. By this results, it considered that 6-stranded $Respond^{\circledR}$(G&H Co., U.S.A.) wire was the most useful material allowing early periodontal tissue remodeling.