• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.292-292
• /
• 2017

하천에서 주로 부유사의 형태로 이송되는 유사는 크게 점착성 유사와 비점착성 유사로 구분된다. 입자의 크기가 약 $63{\mu}m$이하인 유사는 입자 표면의 전자기적 점착력의 영향이 우세하여 유사입자들은 지속적인 응집현상을 겪는다. 응집 현상을 통해 유사의 가장 단위인 일차입자(Primary Particle)들은 하나의 커다란 덩어리인 플럭(Floc)을 형성한다. 응집현상이 중요한 이유는 형성된 플럭의 크기 및 밀도가 끊임없이 변화하는 데 있다. 크기와 밀도의 지속적인 변화로 인하여 유사의 부유에 직접적으로 관계하는 침강속도가 변화한다. 우리나라의 금강 및 낙동강의 하구는 점착성 유사가 지배적인 환경으로, 하구에서의 유사 이동을 살펴보기 위해서는 흐름 방향 및 연직방향으로의 흐름 특성(Hydrodynamics)변화와 응집 모형을 통한 응집 현상의 고려가 필수적이다. 이에따라, 본 연구에서는 흐름 방향 및 연직방향으로의 2차원 점착성 유사 이동모형에 관한 개념적 틀(Framework)을 제시한다. 2차원 점착성 유사 이동 모형의 개념적 틀은 기존의 1차원 연직 점착성 유사 이동 모형을 근간으로 한다. 모형에서 흐름을 구성하는 지배 방정식은 오일러-오일러 이상방정식(Eulerian-Eulerian Two-Phase Equation)을 통해 얻는다. 유사상(Sediment Phase, Dispersed Phase)와 유체상(Fluid Phase, Continuous Phase)는 혼합물 이론(Mxiture Theory)를 통해 하나의 혼합물 상(Mixture Phase)의 지배방정식으로 대표된다. 난류의 계산은 와점성 모형 중 -${\varepsilon}$모형을 통해 수행되며, 부유사의 농도는 유사의 이송-확산 방정식을 통해 모의된다. 입력된 흐름 조건을 따라 초기 흐름이 모의되면, 유체 내에서 시간에 따른 플럭의 크기가 계산된다. 플럭의 크기가 계산되는 과정에서 밀도와 침강 속도가 계산되며, 그 이후에 유체 내 유사의 농도가 계산된다. 난류 모의가 수행되고 난 이후에, 유속이 재계산 된다. 이러한 과정을 통해 흐름 방향 및 연직 방향으로의 유사 이동 모의가 가능한 2차원 점착성 유사 이동 모형이 개발될 수 있을 것이라고 생각된다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2311-2320
• /
• 2022

The main outcomes of the experiments H2P6 performed in the thermal-hydraulics large-scale PANDA facility at PSI in the frame of the OECD/NEA HYMERES-2 project are presented in this article. The experiments of the H2P6 series consists of two PANDA tests characterized by the activation of three (H2P6_1) or one (H2P6_2) cooler(s) in an initially stratified and pressurized containment atmosphere. The initial stratification is defined by a helium-rich region located in the upper part of the vessel and a steam/air atmosphere in the lower part. The activation of the cooler(s) results i) in the condensation of the steam in the vicinity of the cooler(s), ii) the corresponding activation of large scale natural circulation currents in the vessel atmosphere, with the result of iii) the re-distribution and mixing of the Helium stratification initially located in the upper half of the vessel and iv) the continuous pressure decay. The initial helium layer represents hydrogen generated in a postulated severe accident. The main question to be answered by the experiments is whether or not the interaction of the different, localized cooler units would be important for the application of numerical methods. The paper describes the initial and boundary conditions and the experimental results of the H2P6 series with the suggestion of simple scaling laws for both experiments in terms of i) the temperature difference(s) across the cooler(s), ii) the transient steam and helium content and iii) the pressure decay in the vessel. The outcomes of this scaling indicate that the interaction between separate, closely localized units does not play a prominent role for the present experiments. It is therefore reasonable to model several units as one large component with equivalent heat transfer area and total water flow rate.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.243-256
• /
• 2022

A coupled finite element method (FEM)-boundary element method (BEM) for analyzing the hydroelastic response of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) floating plates under moving loads is firstly introduced in this article. For that aim, the plate displacement field is described utilizing a generalized shear deformation theory (GSDT)-based FEM, meanwhile the linear water-wave theory (LWWT)-relied BEM is employed for the fluid hydrodynamic modeling. Both computational domains of the plate and fluid are coincidentally discretized into 4-node Hermite elements. Accordingly, the C1-continuous plate element model can be simply captured owing to the inherent feature of third-order Hermite polynomials. In addition, this model is also completely free from shear correction factors, although the shear deformation effects are still taken into account. While the fluid BEM can easily handle the free surface with a lower computational effort due to its boundary integral performance. Material properties through the plate thickness follow four specific CNT distributions. Outcomes gained by the present FEM-BEM are compared with those of previously released papers including analytical solutions and experimental data to validate its reliability. In addition, the influences of CNT volume fraction, different CNT configurations, water depth, and load speed on the hydroelastic behavior of FG-CNTRC plates are also examined.

• 한국시뮬레이션학회논문지
• /
• 제18권4호
• /
• pp.21-28
• /
• 2009

과거에는 평지에서의 전투가 대부분이었고 단순한 병력 크기가 전투 승패에 큰 영향을 주었다. 1차대전 이후 숲, 도심, 정글 등과 같은 다양한 지형에서 전투를 치루기 때문에 지상전에서 지형요소는 무기체계와 함께 전투에 큰 영향을 미친다. 지금까지 전투에서 지형의 영향은 정성적으로만 설명되었으며 워게임, 교전시뮬레이션에서는 전투요소들의 능력치들을 낮추는 방법을 적용하였다. 본 연구에서는 프랙탈 차원을 이용하여 지형의 영향을 평가하는 방법을 제시하고자 한다. 연구 방법으로 정량적인 지형의 영향도를 구하기 위해 Box Counting Dimension 계산을 이용한 프랙탈 차원 값과 지형의 밀도를 특성 값으로 정하였다. 또한 에이전트 기반 시뮬레이션인 EINSTein 모델에서 구한 전투 결과를 바탕으로 프랙탈 차원과 밀도에 대한 상관도를 분석하였으며 과거 전투 사례 중 '스탈린그라드 전투' 결과와 비교하여 분석하였다. 본 연구는 정성적으로 설명되던 지형의 영향을 프랙탈 차원을 이용하여 정량화함으로써 새로운 전투효과도 평가방법을 제시하였다.

• 한국지반공학회논문집
• /
• 제24권8호
• /
• pp.35-41
• /
• 2008

1-g 진동대 또는 지오센트리퓨지를 사용한 지반지진모사에 대한 동적모형실험을 수행할 때 층 분할된 연성전단상자가 자주 이용되고 있다. 본 연구는 3차원 수치해석기법을 이용하여 자유장, 강성토조와 층 분할된 연성전단상자내 모형지반을 각각 모델링하고 거동을 비교 분석하였다. 분석결과 강성토조의 거동과 자유장의 그것은 상당한 차이를 보이는 반면에 층 분할된 연성전단상자의 거동은 자유장과 유사한 거동을 하였다. 그러나 층 분할된 연성전단상자는 자유장에 비해 가속도가 과소평가되는 경향을 보였고, 특히 모형 중심부에서 가장자리로 갈수록 자유장의 것과 큰 차이를 보였다. 또한 층 분할된 연성전단상자는 자유장에 비해 장주기 특성을 가진 거동을 하여 지반가속도가 자유장의 그것보다 감소하는 경향을 보이는데, 이는 층 분할된 연성전단상자에서 주변지반의 강성과 관성효과가 제대로 반영되지 못해 발생하는 현상으로 판단된다.

• 디지털정책학회지
• /
• 제2권2호
• /
• pp.1-6
• /
• 2023

본 논문은 3차원 모델을 제작하고 Unity를 활용하여 사용자가 보다 더 쉽게 지능형 관광서비스를 접할 수 있도록 하는 방법을 연구했다. 본 연구의 핵심기능 및 환경은 게임 제작용 툴인 Unity를 사용하여, 가상공간을 만들고 안에서 제어와 카메라 시점을 적용한 NPC를 통해 다양한 각도와 위치에서 관광 서비스를 이용할 수 있도록 하는 방법을 연구했다. 본 프로젝트는 가상현실 기술을 활용하여 관광명소를 현장에 가지 않고도 가상 세상에서 둘러 볼 수 있는 지능형 서비스 콘텐츠이다. 본 지능 서비스는 UI/UX 도구를 사용해 게임 형태로 만들고 재미요소를 넣기 위해 간단한 게임 형태로 융합하여 관광지 홍보를 위한 게이미피케이션을 적용했으며, 가상현실 관광지 체험을 실행할 수 있게 하는 것이 연구의 목적이다.

• 천문학회보
• /
• 제45권1호
• /
• pp.42.2-42.2
• /
• 2020

We report on multi-wavelength observations of AA Ori, a Young Stellar Object in Orion-A star-forming region. AA Ori is known to have a pre-transitional disk based on infrared observations including Spitzer/IRS data. We construct its broadband spectral energy distribution (SED) by not only taking data in the optical and IR region but also including Herschel/PACS, JCMT/SCUBA, and SMA observational data. We use the Monte Carlo radiative transfer code (RADMC-3D) to reconstruct the SED with a viscous accretion disk model initialized by a radially continuous disk and finally having an inner and outer dusty disk separated by a dust-depleted radial gap. By comparing the model SEDs with different configurations of disk parameters, we discuss the limits to find a single solution of model parameters to fit the data. We suggest that some models with a modified inner disk surface density gradient and some degree of dust depletion in the inner disk can explain the AA Ori's SED, from which we infer that the inner disk of AA Ori has evolved. We present that model configurations of a pre-transitional disk with a large gap extended to 60-80 AU in a settled dusty disk of a few hundred AU size with a high inclination angle (~60°) also create model SEDs close to the observed one. To distinguish whether the disk has a just-opened narrow gap or a large gap, with an altered surface density of the inner disk extended to 10 AU, we suggest a further investigation of AA Ori with high angular resolution observations.

• 한국BIM학회 논문집
• /
• 제13권4호
• /
• pp.1-12
• /
• 2023

In Korea, there are many attempts to automate architectural design tasks, focusing on government-led national R&D projects and private operators, in order to enhance global competitiveness and productivity of the building service industry. However, according to a survey of architectural design office practitioners, only 25% (9 out of 37) have used it, suggesting that there are fewer cases of practical use in the field compared to research and investment in automation technology development, and there are discrepancies between automation and technology development items required in the field. In this study, the priority of automation of planning and design work of architectural design office practitioners is derived, and a comparative analysis is conducted with domestic architectural design automation service items based on the priority. A survey was conducted on practitioners of domestic architectural design offices to derive automation priorities for 19 items of architectural planning and design work. Based on the derived priorities, the degree of reflection of the working-level automation needs of domestic services was confirmed by comparing them with the domestic architectural planning and design automation service items. As a result, it was confirmed that domestic architectural planning and design automation services did not properly reflect the priority of planning and design work automation of architectural design office practitioners. This suggests that it is necessary to reflect the priorities derived in this study in technology development in order to increase the cases of practical use of the automation technology in the working environment and improve the productivity of service.

• 한국수산과학회지
• /
• 제57권1호
• /
• pp.41-52
• /
• 2024

Serotransferrin cDNA from the Siberian sturgeon Acipenser baerii was isolated and its expression patterns during early life intervals were characterized. It contained an ORF encoding a 708-aa-long polypeptide, including a 19-aa signal peptide. Bioinfomatic analysis and 3D modeling indicated a typical bi-lobal structure with conserved iron-coordinating residues. During embryonic development, the potential transition of maternally provisioned transcripts to zygotically de novo transcribed ones occurred around blastula stage. The transferrin mRNA levels peaked at stages responsible for pronephros, heart and erythropoietic component differentiation. After hatching, the transferrin mRNA expression gradually increased at early ontogenic phases (0 to 3 DPH) corresponding to the periods in which prolarvae exhibited increased blood circulation and liver differentiation. The expression decreased at subsequent stages in which prolarvae exhibited benthic movement. The tissue distribution assay indicated liver-predominant expression at fingerling stage. From the microinjection-based challenge with Aeromonas hydrophila at day-0 and day-7, the transcriptional response was modulated toward upregulation, in which the amounts induced at 6, 12 and 24 HPI were greater in prolarvae injected at day-7 than at day-0. Therefore, transferrin plays important roles in both early development and host protective responses to pathogens in the Siberian sturgeon.

• 한국주거학회논문집
• /
• 제20권1호
• /
• pp.59-70
• /
• 2009

The purpose of the study is to suggest the amount of space for each behavior according to the classification of behavior in the housing to plan the optimal floor space of the elderly housing. The method for calculating space for behavior begins with classifying behaviors, identifying them and then taking pictures of the model of elderly people who reproduce each behavior. Based on the pictures, body parts which are necessary for each behavior are assembled and the formula for behavioral space is created. The space for behavior is produced considering the body dimensions of Korean elderly in their sixty's as well as the furniture size and the psychological distance between people. 3D modeling is used to verify the result. Human behaviors can be classified into individual-related, housework-related, family-related, reception-related and other behaviors. These five behaviors are subdivided into more specific behaviors. The area for each specific behavior is calculated with the anthropometric data of the elderly, preferred furniture dimension and psychological area. As a result the required area for specific behaviors is as follows: the behavior of sleeping in a bed needs $4.3m^2$; the behavior of changing clothes on a chair, $1.7m^2$; the behavior of watching TV on the floor $1.3m^2$, the behavior of working and reading using a desk, $2.1m^2$, the behavior of exercise, $2.5m^2$; the behavior of showering on a chair, $1.3m^2$ and showering using a wheelchair, $1.9m^2$; the behavior of toileting using a wheelchair, $2.3m^2$; the behavior of washing up using a wheelchair, $1.9m^2$; the behavior of eating using a table for four persons, $4.4m^2$; the behavior of cooking and washing dishes, $0.9m^2$ per counter-top; the behavior of washing clothes using a washing machine, $0.9m^2$; the behavior of ironing on the floor $1.4m^2$; the behavior of reception(three persons) on the floor considering personal space, $4.0m^2$; the behavior of taking on and off shoes on a chair, $1.3m^2$. The result of the study is utilized as quantitative data to calculate optimal floor space for elderly housing. In addition, qualitative data such as characteristics of housing preference, spacial usage and storage capacity are necessary to produce the floor space which can provide convenient and safe living environment.