• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.833-842
• /
• 1998

In this paper, a K-band oscillator which is composed of a hair-pin resonator, a GaAs MESFET, and a frequency doubler, is suggested, implemented by HMIC(Hybrid Microwave Integrated Circuits) form, and characterized for its microwave performance. A $\lambda_g$/4 open stub is used in frequency doubler to suppress the fundamental frequency of 9 GHz which is the output of the hair-pin resonator oscillator and output matching network is optimized for its second harmonic freuency of 18 HGz. For the oscillator, the output power of -0.83 dBm, the fundamental frequency suppression of -23 dBc, and phase noise of -86 dBc/Hz at 18.20 GHz are obtained.

• Journal of the Korean Magnetics Society
• /
• v.18 no.5
• /
• pp.195-199
• /
• 2008

Composites of $Fe_{93.5}Si_{6.5}$ powder and epoxy were prepared using a thermal curing process. Scanning electron microscope (SEM), vibrating sample magnetometer (VSM) and network analyzer were used to analyze the structure, electromagnetic properties and microwave absorption of the composites. Results show that the saturation magnetization depends on the fraction of the $Fe_{93.5}Si_{6.5}$ powder in the composite, which affects initial permeability. It is believed that the eddy current loss is a dominant factor over 1 GHz and that the resonance frequency of the composite decreases with increasing fractions of $Fe_{93.5}Si_{6.5}$ powder. Finally, reflection loss was calculated from the permeability and permittivity of these composites. Composite with 50 wt.% $Fe_{93.5}Si_{6.5}$ powder fractions and 5 mm thickness showed reflection loss below -20 dB from 3.66 GHz to 4.16 GHz. Therefore, it is believed that thin Fe-Si/epoxy composites may be a good candidate for microwave absorption application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.37-43
• /
• 2007

In this.paper, we introduce design and implementation results of the single balanced diode mixer for European point-to-point microwave radio in order to improve flatness performance. When a resonator such as RF filter is integrated with a mixer, impedance characteristic of 50 ohm is maintained only in RF band, not in LO band resulting deterioration of flatness performance because of LO power variation on the diode. In the paper, we suggest a design method of mixer integrated with image rejection filter and LO harmonic filter to have a better performance of flatness using embedding electrical length between filter and mixer's port. Frequency specification of fabricated mixer is $21.2{\sim}22.6\;GHz$ for RF, $19.32{\sim}20.72\;GHz$ for LO and 1.88 GHz+/-50 MHz for IF, respectively. Measured results show conversion loss of 8.5 dB, flatness of 2 dB, input PldB of 8 dBm, IIP3 of 15 dBm under LO power level of 10 dBm. Return losses of RF, LO and IF port are under -12 dB, -10 dB and -5 dB, respectively. Isolations of LO/RF and LO/IF are 20 dB and 50 dB, respectively.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.294-297
• /
• 2003

This paper describes the design and the simulation of a frequency doubler for millimeter-wave applications using distributed amplifier technology. The designed frequency multiplier has 10% bandwidth at 58GHz output. This paper investigates nonlinear analysis of pHEMT frequency multipliers utilizing AM-AM and AM-PM distortion characteristics of frequency doubler. The conversion loss is 2.1dB and harmonic suppression is larger than 18.6dBc with 5dBm input power

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1671-1673
• /
• 2002

자장 크기 변화에 따른 마이크로파를 발생시켜 출력 크기를 측정함에 있어 축 방향 자장의 크기를 두가지 크기로 변화시켜 결과 자장크기 부근에서 출력증대가 일어났다. 이는 전자 사이크로트론 공명에 의한 출력증대로 볼 수 있으며 수직방향의 크기로 간주된다. 본 실험에서는 원래 수평방향의 자계에 대하여 출력발생 및 출력증대가 이루어지는 후진파 발진기를 이용한 실험을 하였다. 주파수 18${\sim}$21GHz대를 이용하여 측정한 결과 0.3T와 0.7T부근에서 출력증대 및 효율증대가 이루어 지는 것을 관찰하였다.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.20-25
• /
• 2018

In this paper, we have designed circularly polarized array antenna for 5.8GHz microwave wireless power transmission. To obtain high antenna gain, we studied a single patch antenna, a $2{\times}1$ array antenna, a $2{\times}2$ array antenna, a $2{\times}4$ array antenna, and a $4{\times}4$ array antenna. Commonly, characteristics of each antenna have a frequency of 5.8 GHz and Right Hand Circular Polarization(RHCP) of circular polarization. Also, the results were obtained with the design to each antenna that the return loss was less than -10dB and the axial ratio was less than 3dB. The gain of the antennas was 6.08dBi for a single patch antenna, 9.69dBi for a $2{\times}1$ array antenna, 12.99dBi for a $2{\times}2$ array antenna, 15.72dBi for a $2{\times}4$ array antenna and 18.39dBi for a $4{\times}4$ array antenna. When the elements of the array antenna were increased, it was confirmed that it increased by about 3dBi.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.10-16
• /
• 1991

The error networks due to the measuring systems and the test fixture must be previously calibrated in order to characterize the microwave devices. In this paper, it is presented a new method to characterize the error networks in which only two different microstrip lines are used for the calibration. Once each length of two calibrat- ing microstrip lines is accurately defined, the calibrated data can be easily obtained without acknowledgement for the propagation constant. The end effect is not considered when fabricated the microstrip lines used to calibration. The ATF13736 GaAs MESFET is characterized by means of the calibrating procedure with this method. The range of measuring frequency is 2 to 18 GHz, and the bias voltage and current are $V_{DS}$ =2.5V, $I_{DS}$ =20mA, respectively. Compared the calibrated data with data sheet, it is showed that the magnitude is nearly agreed with each other and the phase is deviated by 0.1 to 12 degrees in lower frequencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.384-393
• /
• 2013

In this paper, a design of planar microwave bias-tee using lumped elements was presented. The bias-tee is composed of 2 blocks; DC block and RF choke. For this design of the bias-tee, a wideband capacitor was used for DC block. For a RF choke, a series connection of inductors which have different SRFs is used for a RF choke. In the RF choke, a series connection of resistor and capacitor was added in shunt to eliminate a loss from a series resonance. The designed bias-tee was implemented by using 1608 SMT chip components. The fabricated bias-tee was measured using Anritsu 3680K fixture which enables to remove an effect of a connector. The fabricated bias-tee presented -15 dB of return loss and -1.5 dB insertion loss at 10 MHz~18 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.73-77
• /
• 2012

In this article, we designed a wide bandpass filter in order to apply microwave reflectometry for KSTAR. The proposed wide bandpass filter consists of a metamaterial structure which is to get a wide band, a lower insertion loss, and a high skirt. This is applied to VCO's output to enhance the linearity. A pass band is 18-28 GHz and the out of pass band is stopped over 20 dB. To confirm of the metamaterial, we suggest a dispersion diagram. The proposed filter in lower band and upper band of pass band is respectively a left handed and right handed characteristics. A group delay is below 0.5 ns.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.51.2-51.2
• /
• 2015

한국에서 태양전파관측이 처음으로 이루어진 것은 1986년 대덕전파망원경의 시험관측을 위해서였다. 이후 기술개발을 위한 간섭계 관측이 이루어지기도 했으나 일시적인 시험관측에 그쳤고, 본격적인 태양상시관측은 전파연구소 이천분소에서 1997년부터 30-2500 MHz 대역의 태양전파를 관측하면서 시작되었다. 이후 전파연구소는 2.8 GHz 관측기, 광대역 태양전파 노이즈 관측기 등 다양한 관측기를 설치하여 우주전파환경 예보에 활용하고 있다. 한국천문연구원은 2007년 e-CALLISTO 관측망의 수신기를 들여와 45-450 MHz의 태양전파스펙트럼을 관측하기 시작하였고, 이후 2009년에는 0.245-18 GHz의 태양전파스펙트럼을 관측할 수 있는 KSRBL을 설치하여 관측대역을 마이크로파 대역으로 확장시켰다. e-CALLISTO와 KSRBL의 도입을 계기로 한국천문연구원의 태양연구는 태양전파와 고에너지태양물리로 연구 분야를 확장시킬 수 있게 되었으며, 관측자료는 태양전파폭발 감시와 CME 및 플레어 연구에 활용되고 있다.