• Journal of the Korean Society for Heat Treatment
• /
• v.18 no.2
• /
• pp.83-90
• /
• 2005

Failure cause of the fractured engine parts was analyzed by microstructural observation. These parts were failed far earlier than the expected service life. By the stereoscope and SEM examinations of the fractured surface, the fracture modes have been identified as wear and fatigue failure. From the observation of microstructure and microhardness measurements of the failed gears, the probable cause for failures are internal oxidation during using and retained austenite and carbide networks due to heat-treatment, respectively. These defected structures at near surface contributed to the wear and fatigue failure.

• The Korean Journal of Food And Nutrition
• /
• v.3 no.2
• /
• pp.177-184
• /
• 1990

General components, amino acids and minerals contained in T kind of edible wild grasses were estimated. Samples were collected from the field of Kapyong area, Kyung-ki, Korea. Results of the estimation were summarized as follows ; 1) A relatively large amounts of protein and fat were contained in the edible parts of each sample. 2) The most abundant amino acids in the edible parts of each sample were glutamic acid (26.6%), serine(18.7%), valise(22.4%), respectively. 3) A high level of calcium and iron was found in the edible parts of each samples. Especially calcium was abundant in the leaves of Rumex coreanus Nakai and iron was abundant in the Commelina communis L. Both copper and zinc were abundant in the Sanguisorba officinalis L.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.743-756
• /
• 2004

The purpose of this study is to set measurement parts which are important to identify the size and shape of the head in order to produce tightly fitted hats, and to identify detailed sizes and the major factors of head shape classifications of Korean women. A total of 285 Korean women's in the age group of 18 to 35 years old. It were measured through the direct measurement method by selecting 67 measurement items. Materials were analyzed by SPSS Ver.10 and technology statistics and factor analysis were performed according to the agenda. An attempt was made to conduct factor analysis of the measured region of the head in women's. Here, this study drew the head and the facial parts horizontal size as Factor 1, the head and facial parts vertical size as Factor 2, the circumference and width item as Factor 3, the factor representing the form of head height as Factor 4, the factor expressing the proportion of the facial form as Factor 5 and the factor about the frontal and back head form on the plan of the middle as Factor 6. Through this study, we will be able to systemize head measurement materials that can differentiate Korean's head from other peoples' and can use the results in developing head shape models according to Korean's head shape by selecting major head parts needed to identify the sizes and shapes.

• IE interfaces
• /
• v.12 no.1
• /
• pp.10-18
• /
• 1999

Job shop manufacturing environments are using the concept of cellular manufacturing systems(CMS) which has several advantages in reducing production lead times, setup times, work-in-process, etc. Utilizing the similarities between cell-machine, part-machine, and the shape/size of parts, CMS can group machines and parts resulting in improved efficiency of this system. However, when grouping machines and parts in machine cells, there inevitably occurs exceptional elements(EEs), which can not operate in the same machine cell. Minimizing these EEs in CMS is a critical point that improving production efficiency. Constraints in machine duplication cost, machining process technology, machining capability, and factory space limitations are main problems that prevent achiving the goal of maintaining an ideal CMS environment. This paper presents an algorithm that minimizes EEs under the constraints of machine duplication cost and factory space limitation. Developing exceptional operation similarity(EOS) by cell-machine incidence matrix and part-machine incidence matrix, it brings the machine cells that operate the parts or not. A mathematical model to minimize machine duplication is developed by EOS, followed by a heuristic algorithm in order to reflect dynamic situation resulting from minimizing exceptional elements process and the mathematical model. A numerical example is provided to illustrate the algorithm.

• Journal of Environmental Health Sciences
• /
• v.26 no.2
• /
• pp.116-121
• /
• 2000

This study was performed to investigate the heavy metal contents and distribution in bioorganisms from the estuary area of Mankyeong-Dongjin river. In paddy plant, the average contents of heavy metals were in order of Zn>Cu>Pb>Cr>Cd in all parts. Those of Cd, Cr, Pb and Cu were all highest in the leaf while lowest in the brown rice. The average content of Zn was almost similar in all parts. In the dried muscular parts of shellfish, the average contents of heavy metals were in the range of 1.06~1.95 mg/kg for Cd, 2.93~4.98 mg/kg for Cr, 0.90~1.17 mg/kg for Pb, 8.41~18.58 mg/kg for Cu and 29.81~67.31 for Zn, respectively, In fish(Acanthogobius hasta), the average contents of heavy metals in the dried body parts were in the range of 0.05~0.43 mg/kg for Cd, 0.65~4.59 mg/kg for Cr, 1.01~4.75 mg/kg for Pb and 1.34~4.19 mg/kg for Cu, with high accumulation in bone and head overally.

• Journal of The Korean Radiological Technologist Association
• /
• v.25 no.1
• /
• pp.18-18
• /
• 1999

We have studied DR of medical science at SNUH since early 90's, founded the basis of Picture Archiving Communication System(PACS) used for actual clinic parts, has acquired images gradually since January H and came to acquire images in all examinations ex

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1096-1105
• /
• 1994

A hypereutectic Aluminum-Silicon Alloy is widely used in the parts of automobile because of high-resistance and good strength. In this study, the cutting of hypereutectic A1-Si alloy for economical production was investigated by simulation. Tool life and the extraction rate of Si particles is inversely proportional to the depth of cut. When decreasing the depth of cut, the reduction of single crystal diamond tool cost and tool change time is achieved.

• ALGAE
• /
• v.19 no.4
• /
• pp.329-337
• /
• 2004

Monthly variations of phytoplankton communities were conducted to the investigation at five stations in mid and lower parts of the Nakdong River from December 1995 to November 1996. The phytoplankton communities were identified a total 456taxa which were composed of 136 genera, 427 species, 27 varieties and 2 forma. The standing crops of phytoplankton communities ranged from 2.7 to 52.8 (${\times}$10³)cells·ml$^{-1}$ during the investigation periods. Bacillariophyceae was the dominant classes at all stations. The dominant species were 7taxa and the standing crops of these ranged from 18.3 to 95.1% of the standing crops of phytoplankton communities. The dominant species in the mid parts (st. 1, 2) of this river system were benthic species such as Navicula gregaria, N. viridula var. rostellata and Nitzschia palea, however it was planktonic species (Stephan discus hantzschii, Golenkinia radiata) and meroplanktonic species (Aulacoseira ambigua, A. granulata) in the lower parts (st. 3, 4, 5). The seasonal variations of the dominant species in the lower parts were appeared to the planktonic species (S. hantzschii) from winter to spring, and were the meroplanktonic species (A. ambigua and A. granulata) in from summer to fall. The lower parts of the Nakdong river were entropic states because the dominant species were composed A. ambigua, A. granulate and S. hantzschii which were indicators of entropic water quality. The interrelationships between total standing crops and environmental factors(water temperature, pH, NH$_4$, NO$_2$, NO$_3$ and PO$_4$) were low positive or negative coefficients. S. hantzschii had low positive or negative relations with water temperature, NH$_4$, NO$_2$, NO$_3$ and PO$_4$. As the result, the variations of standing crops of phytoplankton were not caused by a single factor but controlled by the complex factors.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.17-22
• /
• 1996

티타늄합금을 사용하여 흡기밸브, 배기밸브, 밸브스프링 리테이너를 시제작하였다. FEM 구조해석결과와 모터링 내구실험결과를 통해 이들 부품들이 신뢰성을 가지는 것으로 판명되었다. 엔진성능실험을 통해서 고속영역에서 엔진출력 및 토오크가 3-4% 향상되었다. 단 향후 엔진내구실험을 통하여 충분한 내구성검증이 필요하다고 판단된다.

• 열병합발전
• /
• s.37
• /
• pp.18-21
• /
• 2004

There are several bearing system at large steam-turbines in thermal power plant. The bearing system is one of the most important parts of rotating machinery. The steam turbine vibrations mainly depend on the bearing oil the shaft alignment condition. This paper describes on the steam turbine abnormal vibration due to the oil whip in terms of the shaft alignment in the thermal power plant.