• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.1-16
• /
• 2021

This study classified short adult male body types and identified characteristics by body type according to Size Korea's 7th human system measurement data for men in their 20s to 60s. There were four body types for short adult males. Type 1 was a 'short bird legs-normal body shape' with an average body size, low body height, short torso length, thin legs, and no sagging shoulders. Type 2 was a 'short torso thin body' with a small body size, a slim body, a high body height, a short torso length and no sagging shoulders. Type 3 was a 'thick leg-overweight body shape' with a large body size, thick legs, low body height, small shoulder length and obesity. Type 4 was a 'long bird legs-normal body' with a normal body size, high body height, thin legs, long torso and sagging shoulders. The development of clothing design and pattern reflecting the body shape characteristics of short adult males should be improved to fit clothing and suitability. It is necessary to increase the satisfaction of ready-to-wear for consumers with various body types by adding the size for shorter men through a subdivision of the ready-made size system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.383-391
• /
• 2021

To develop a cultivation method for the mass production of sweetpotato cultivars, 'Juhwangmi' (orange tuber) and 'Sinjami' (puple tuber), the yield of tuber roots and content of various functional substances were analyzed according to planting intervals and growing periods. For 'Juhwangmi, the total yield of tubers was increased by respectively 36% and 54% and the yield of tubers over 300 g was increased by respectively 170% and 221% in the 140-day and 160-day cultivation plots compared with that in the 120-day cultivation plot at the 70×20 cm planting interval. Similarly, the total content of beta-carotene in the tubers increased as the cultivation period was extended. In particular, beta-carotene content at the 70×20 cm planting interval was the highest. For 'Sinjami', at the same planting interval, the total yield of tubers and yield of tubers over 300 g significantly increased as the growing period was extended. Within the same cultivation period, the yield of tubers over 300 g and the total anthocyanin content of 'Sinjami' were higher at the 70×30 and 70×35 cm planting intervals than at the 70×20 and 70×25 cm planting intervals in the 140-day and 160-day cultivation plots. Moreover, the total polyphenol and flavonoid content was significantly higher in 'Sinjami' than in 'Juhwangmi', and the values were the highest in the 160-day cultivation plots. In particular, the content of these two functional substances in tubers over 300 g was the highest at the 70×30 and 70×35 cm planting intervals.

• Korean Journal of Agricultural Science
• /
• v.7 no.1
• /
• pp.52-58
• /
• 1980

This study was conducted to detect copper which is considered in the soils of orchards, since copper fungicide has been applied to fruit trees. Soil samples taken from the fields of the chief producing districts of apple (Chungju, Yesan, Daegu), pear (Yangju, Bucheon, Seonghwan) and citrus (Seogypo in Jeju island) were analysed by an atomic absorption spectrophotometer. The results obtained were summarized as follows ; 1. In orchards of apple, the amount of copper of soils from Yesan, Chungju and Daegu were ranged 2.6-171.3ppm, 2.2-136.1ppm and 14.3-134.6ppm, respectively. Very little copper was detected from the soils in the field which has been cultivated for less than 20 years. About 100ppm and 130-170ppm of copper were detected in the field which has been cultivated for 30 years and for 50-60 years, respectively. Most of the copper was detected in the surface layer of soils (0-10cm), while very low content of copper was detected in the deeper layer of soils (10-20cm). 2. In orchards of pear, 20-30ppm of copper was detected from the surface of soils in the field which has been cultivated for more than 30 years and the highest level of copper, 36.8ppm, was detected from Yangju area. The amount of copper of soils from Yangju, Seonghwan and Bucheon were ranged 3.6-36.8ppm, 9.7-19.4ppm and 3.6-24.7ppm, respectively. 3. In orchards of citrus of Jeju island, only trace amount and 23-38ppm of copper were detected in the fields cultivated for 15 years and 20-30 years, respectively. The highest level of copper, 57ppm, was detected from the surface layer of soils in the field which has been cultivated for 35 years, but in most of the soil samples tested, only the natural background level of copper, about 20ppm, was detected. 4. The levels of copper residue in all the soil samples tested were lower than the tolerance level (125ppm of copper which is extracted in 0.1N-HCl solution), except those of copperr residue, 130-170ppm, that were detected from the orchards of apple which have been under cultivation for 50-60 years. Hence no problem for the farming could be speculated with the present concentration of copper analysed.

• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.164-170
• /
• 1999

Background: The diffuse infiltrative lung disease often requires biopsy for its final diagnosis. Unlike the limited exposure that can be achieved through small thoracotomy incisions in open lung biopsy technique, the thoracoscopic approach allows visualization and biopsy of nearly entire surface of the lung without morbidity of large standard thoracotomy. The purpose of this study was to compare the diagnostic efficacy and operative safety of thoracoscopic lung biopsy(TLB) with open lung biopsy(OLB) in the diagnosis of diffuse infiltrative lung disease. Material and Method: From March 1993 to August 1997, 81 patients were referred for diagnostic lung biopsy. 51 of them underwent standard open lung biopsy and the remaining 30 patients underwent thoracoscopic lung biopsy. Result: Mean operative time was 63 minutes for TLB and 79 minutes for OLB (p=0.04). The volume of biopsy specimen was not different between two groups(TLB 7.8 cm3, OLB 6.9 cm3 : p=0.72) and the diagnostic accuracy of each methods was comparable (TLB 100%, OLB 96%). The duration of hospital stay was significantly less in TLB (TLB 13days, OLB 22days : p=0.01). The duration of parenteral narcotics administration was also less for TLB(TLB 2.5days, OLB 5.2days, p=0.05). Meanwhile, the duration of chest tube drainage, the frequency of parenteral narcotic injection were not significantly different between two groups. Complications occurred in 2 among the TLB patients (6.67%) and 4 among the OLB patients (7.84%). There was no operative mortality in both groups. Conclusion: We concluded that TLB is a good alternative procedure to OLB in the diagnosis of diffuse infiltrative lung disease with lower morbidity and comparable diagnostic accuracy.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.56-60
• /
• 2009

Purpose: The various studies and efforts to develop program are in progress in the field of nuclear medicine for the purpose of reducing scan time. The Oncoflash is one of the programs used in whole body bone scan which allows to maintain the image quality while to reduce scan time. When Those applications are used in clinical setting, both the image quality and reduction of scan time should be considered, therefore, the purpose of this study was to determine the criteria for proper scan speed. Materials and Methods: The subjects of this study were the patients who underwent whole body bone scan at the departments of nuclear medicine in the Asan Medical Center located in Seoul from 1st to 10th, July, 2008. The whole body bone images obtained in the scan speed of 30cm/min were classified by the total counts into under 800 K, and over 800 K, 900 K, 1,000 K, 1,500 K, and 2,000 K. The image quality were assessed qualitatively and the percentages of those of 1,000K and under of total counts were calculated. The FWHM before and after applying the Oncoflash were analyzed using images obtained in $^{99m}Tc$ Flood and 4-Quadrant bar phantom in order to compare the resolution according to the amount of total counts by the application of the Oncoflash. Considering the counts of the whole body bone scan, the dosed 2~5 mCi were used. 152 patients underwent the measurement in which the counts of Patient Postioning Monitor (PPM) were measured with including head and the parts of chest which the starting point of whole body bone scan from 7th to 26th, August, 2008. The correlations with total counts obtained in the scan speed of 30cm/min among them were analyzed (The exclusion criteria were after over six hours of applying isotopes or low amount of doses). Results: The percentage of the whole body bone image which has the geometric average of total counts of under 1,000K among them obtained in the scan speed of 30cm/min were 17.6%(n=58) of 329 patients. The qualitative analysis of the image groups according to the whole body counts showed that the images of under 1,000K were assessed to have coarse particles and increased noises. The analysis on the FWHM of the images before and after applying the Oncoflash showed that, in the case of PPM counts of under 3.6 K, FWHM values after applying the Oncoflash were higher than that before applying the Oncoflash, whereas, in the case of that of over 3.6 K, the FWHM after applying the Oncoflash were not higher than that before applying the Oncoflash. The average of total counts at 2.5~3.0 K, 3.1~3.5 K, 3.6~4.0 k, 4.1~4.5 K, 4.6~5.0 K, 5.1~6.0 K, 6.1~7.0 K, and 7.1 K over (in PPM) were $965{\pm}173\;K$, $1084{\pm}154\;K$, $1242{\pm}186\;K$, $1359{\pm}170\;K$, $1405{\pm}184\;K$, $1640{\pm}376\;K$, $1,771{\pm}324\;K$, and $1,972{\pm}385\;K$, respectively and the correlations between the counts in PPM and the total counts of image obtained in the scan speed of 30 cm/min demonstrated strong correlation (r=.775, p<.01). Conclusions: In the case of PPM coefficient over 3.6 K, the image quality obtained in the scan speed of 30cm/min and after applying the Oncoflash was similar to that obtained in the scan speed of 15 cm/min. In the case of total counts over 1,000 K, it is expected to reduce scan time without any damage on the image quality. In the case of total counts under 1,000 K, however, the image quality were decreased even though the Oncoflash is applied, so it is recommended to perform the re-image in the scan speed of 15 cm/min.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.4
• /
• pp.79-86
• /
• 2003

The purpose of study is to offer base data for high fluid concrete mix property, as grasp effect of aggregate to reach much more effect for producing high fluid concrete. For this study, there are three types of combined aggregates, river sand + river aggregate(type A), river sand + crusted aggregate(type B), washed sea sand + crushed aggregate(type C) and take a factor, water-contents, water-binder ratio and S/a. And so, we had following conclusion, resulting application-ability of high fluid mortar by K-slump tester to use a handy consistency measuring instrument. And so, we had following conclusion, resulting application-ability of high fluid concrete by K-slump tester to use a handy consistency measuring instrument. 1) In cafe of regular water binder ratio, high fluid concrete suffered much effect of combined aggregates and water binder ratio. Range of water binder ratio by combined aggregates is w/b 0.4 downward(type A and B), w/b 0.35 downward(type C). 2) Water contents to need for producing high fluid concrete is minimum 170kg/$\textrm{m}^3$ without regard to combined aggregates. 3) The effect of S/a on high fluid concrete by combined aggregates is approximately S/a 50% (type A and B), s/a 50-55% (type C). 4) Consistency measuring of high fluid concrete by K-slump tester is possible and first indication value, high fluid concrete can be produced, is 6~10.5cm.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.457-462
• /
• 2005

Polyurethane foams (PUFs) were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI), mixed polyol with OH value of 480, silicone surfactant, three catalysts, and hydrofluorocarbon(HFC) as blowing agent. Balance (PC-8), gelling (33LV), and trimerization (TMR-2) catalysts were used. The effect of the catalysts on the physical properties of PUF with increase of isocyanate (NCO) index and aging time was investigated. The cell size of the PUF with PC-8 and 33LV slightly increased with an increase in NCO index from 100 to 170 but compressive strength did not change significantly. In case of trimerization catalyst, the compressive strength of PUF increased from 8.75 to 1$10.5 kg_f/cm^2$ and the cell size decreased with an increase in NCO index. The compressive strength of the PUF with 33LV increased from 9.21 to $10.15 kg_f/cm^2$ with an increase in aging time. However, there was no detectable change in the compressive strength of PUF with TMR-2. A possible interpretation of the results includes an additional cross-link reaction of non-reacted MDI and FTIR spectrum illustrated the change of NCO peak.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.170-174
• /
• 2023

CO₂ is known as one of the causes of global warming, and various studies are being conducted to capture it. In this study, a tetrafluoromethane (CF₄) plasma reaction was performed to improve the CO₂ adsorption of activated carbons (ACs) through changes in surface characteristics, and the adsorption characteristics according to the reaction time were considered. After the reaction, the micropore volume increased up to 1.03 cm³/g. In addition, as the reaction time increased, the fluorine content on the surface increased to 0.88%. It was possible to simultaneously control the pore properties and surface functional groups of the ACs through this experiment. Also, the CO₂ uptake of surface-treated ACs improved up to 7.44% compared to untreated ACs, showing the best performance at 3.90 mmol/g when the reaction time was 60 s. This is due to the synergy effect of the fluorine functional groups introduced on the surface of the ACs and the increased micropore volume caused by the etching effect. It was found that the micropore volume had a greater effect on CO₂ adsorption in the region where the CO₂ uptake was less than 3.67 mmol/g, while the added fluorine content had a greater effect in the region above that.

• Clinical and Experimental Pediatrics
• /
• v.53 no.2
• /
• pp.203-209
• /
• 2010

Purpose : Growth impairment is usually observed in children with congenital heart disease (CHD). Studies on the final height and weight of this population are insufficient. Our aim was to evaluate the final height of children with CHD and to identify the relationship between CHD and growth. Methods : We recorded the values of final height and weights of 105 CHD patients (age, <19 years) who visited Chonnam National University Hospital between November 2000 and March 2009, and we reviewed the medical records. Results : The mean values of weight and height of male CHD patients were significantly lower than those of the normal subjects. Patients with severe growth impairment (below the third percentile of normal) included 5 males (8.6%) and 4 females (8.5%) with height less than normal and 9 males (15.5%) and 8 females (17.0%) with weight less than normal. The mean growth of the patients in the cyanotic heart disease group was lower than that of normal subjects, but a statistically significant difference was noted in the weights of males. In a comparative study based on the type of CHD, a significant difference was noted in weights of males. Patients with patent ductus arteriosus and those with tetralogy of Fallot had the highest and lowest mean values of weight, respectively. Conclusion : Growth impairment was more evident in children with CHD than normal children. Patients should be treated during an optimal time frame. Thus, CHD patients should be treated if follow-up studies indicate growth impairment.

• Radiation Oncology Journal
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2001

Purpose : The measurement of radiation survival using a clonogenic assay, the established standard, can be difficult and time consuming. In this study, We have used the MTT assay, based on the reduction of a tetrazolium salt to a purple formazan precipitate by living cells, as a substitution for clonogenic assay and have examined the optimal condition for performing this assay in determination of radiation sensitivity. Materials and Methods : Four human cancer cell lines - PCI-1, SNU-1066, NCI-H630 and RKO cells have been used. For each cell line, a clonogenic assay and a MTT assay using Premix WST-1 solution, which is one of the tetrazolium salts and does not require washing or solubilization of the precipitate were carried out after irradiation of 0, 2, 4, 6, 8, 10 Gy. For clonogenic assay, cells in $25\;cm^2$ flasks were irradiated after overnight incubation and the resultant colonies containing more than 50 cells were scored after culturing the cells for $10\~14$ days. For MTT assay, the relationship between absorbance and cell number, optimal seeding cell number, and optimal timing of assay was determined. Then, MTT assay was performed when the irradiated cells had regained exponential growth or when the non-irradiated cells had undergone four or more doubling times. Results : There was minimal variation in the values gained from these two methods with the standard deviation generally less than $5\%$, and there were no statistically significant differences between two methods according to t-test in low radiation dose (below 6 Gy). The regression analyses showed high linear correlation with the $R^2$ value of $0.975\~0.992$ between data from the two different methods. The optimal cell numbers for MTT assay were found to be dependent on plating efficiency of used cell line. Less than 300 cells/well were appropriate for cells with high plating efficiency (more than $30\%$). For cells with low plating efficiency (less than $30\%$), 500 cells/well or more were appropriate for assay. The optimal time for MTT assay was after 6 doubling times for the results compatible with those of clonogenic assay, at least after 4 doubling times was required for valid results. In consideration of practical limits of assay (12 days, in this study) cells with doubling time more than 3 days were inappropriate for application. Conclusion : In conclusion, it is found that MTT assay can successfully replace clonogenic assay of tested cancer cell lines after irradiation only if MTT assay was undertaken with optimal assay conditions that included plating efficiency of each cell line and doubling time at least.