• Title/Summary/Keyword: 16

Search Result 98,339, Processing Time 0.083 seconds

A Performance-Oriented Intra-Prediction Hardware Design for H.264/AVC

  • Jin, Xianzhe;Ryoo, Kwangki
    • Journal of information and communication convergence engineering
    • /
    • v.11 no.1
    • /
    • pp.50-55
    • /
    • 2013
  • In this paper, we propose a parallel intra-operation unit and a memory architecture for improving the performance of intra-prediction, which utilizes spatial correlation in an image to predict the blocks and contains 17 prediction modes in total. The design is targeted for portable devices applying H.264/AVC decoders. For boosting the performance of the proposed design, we adopt a parallel intra-operation unit that can achieve the prediction of 16 neighboring pixels at the same time. In the best case, it can achieve the computation of one luma $16{\times}16$ block within 16 cycles. For one luma $4{\times}4$ block, a mere one cycle is needed to finish the process of computation. Compared with the previous designs, the average cycle reduction rate is 78.01%, and the gate count is slightly reduced. The design is synthesized with the MagnaChip $0.18{mu}m$ library and can run at 125 MHz.

A New SAT Encoding for Solving Sudoku (수도쿠 풀이를 위한 새로운 SAT 인코딩)

  • Park, Jun-Kil;Choi, Jin-Young
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2007.06b
    • /
    • pp.487-492
    • /
    • 2007
  • 수도쿠를 푸는 것은 오락으로서 뿐 아니라 컴퓨터 계산 문제로서도 흥미롭다. 수도쿠는 minimal과 extended 인코딩을 통해 SAT로 변환되고, 탐색이 아닌 추론기술의 반복 적용을 통해 다항시간에 해를 찾을 수 있다. minimal과 extended 인코딩은 직관적이지만 고차 수도쿠($16\times16$ 이상)를 풀기에 충분하지 못하다. 이 논문에서는 extended 인코딩을 개선한 블록 인코딩을 제안한다. 블록 인코딩을 $16\times16$$25\times25$ 퍼즐 집합에 적용 했을 때 extended 인코딩에 비해 추론기술에 따라 1%에서 12% 더 많은 수의 퍼즐을 푸는 것을 실험을 통하여 보인다.

  • PDF

The effect of High Temperature Aging on the Bonding Characteristics of ACA COG (ACA COG의 접합특성에 대한 고온시효의 영향)

  • Han, Jeong-In;Hong, Seong-Je
    • Korean Journal of Materials Research
    • /
    • v.6 no.11
    • /
    • pp.1146-1152
    • /
    • 1996
  • 실제 사용시 신뢰성을 보장하기 위하여, 고온에서 장시간 동안의 시효로 인한 ACA COG(Anisotropic Conductive Chip On Glass) 접합 특성의 변화가 연구되었다. 모든 접합 시편들은 16$0^{\circ}C$에서 156시간 동안 유지되었고 시효하는 동안의 접촉저항의 변화는 감소하였다. 특히, 156시간이후, 4000개 /$\textrm{mm}^2$의 입자밀도를 가진 ACA에서는 접촉저항의 벼노하가 나타나지 않았다. 입자크기의 경우 작은 입자를 가진 ACA는 16$0^{\circ}C$에서 시효후에도 접촉저항의 변화를 보이지 않았다. 또한 4000개/$\textrm{mm}^2$ 및 5$\mu\textrm{m}$ 입자를 가진 ACA를 사용한 시편은 접합상태가 안정하였기 때문에 16$0^{\circ}C$에서도 경화수지의 팽창 및 리플로우(reflow)에 의한 영향을 받지 않았다. 따라서 이 ACA에서는 16$0^{\circ}C$에서 156시간 동안 시효한 후에도 오픈(open)이 나타나지 않았다.

  • PDF

SAFETY EVALUATION OF ADENOVIRUS-MEDIATED P16 GENE TRANSFER BY USING MICROARRAY AND 2D/MALDI-TOF

  • Park, Misun;Hoil Kang;Jaehee Pyo;Sinae Lim;Seungwan Jee;Miok Eom;Taikyung Ryeom;Kim, Okhee
    • Proceedings of the Korean Society of Toxicology Conference
    • /
    • 2002.11b
    • /
    • pp.196-196
    • /
    • 2002
  • p16INK4a tumor suppressor gene transfer in the non-small cell lung cancer cells by transduction of recombinant adenovirus (Ad5CMV-p16) resulted in significant inhibition of cancer cell growth (Anticancer Res., 1998, 18:3257-3261). As a safety concern, we have investigated gene and protein expression after transduction of adenoviral vector (Ad5CMV-p16) in human non-small cell lung cancer (A549) cells by using microarray and 2D gel electrophoresis/ MALDI-TOF.(omitted)

  • PDF

Development of a Hydraulic Servo System Real-Time Simulator Using a One-board Microprocessor and Personal Computer (원보드 마이크로 프로세서 제어기 및 PC를 이용한 유압서보시스템의 실시간 시뮬레이터 개발)

  • Chang, Sung-Ouk;Lee, Jin-Kul
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.17 no.8
    • /
    • pp.94-99
    • /
    • 2000
  • In this study applied the general controller into th 16bit ordinary controller and recommand the simulator features the real system's propeties without DSP(Digital Signal Processing)-card. This simulator is designed to be synchronized in real time using A/D(Analog-Digital) convert and D/A(Digital-Analong) convert. In this study DSP card which is usually used for complex calculation is replaced with personal computer and designed to control, control-force using with the 16-bit micro processor.

  • PDF

Four New Compounds From Isodon eriocalyx

  • Wang, Jia;Lin, Zhong-Wen;Shingu, Tetsuro;Sun, Han-Dong
    • Natural Product Sciences
    • /
    • v.4 no.3
    • /
    • pp.143-147
    • /
    • 1998
  • Examination of the chemical constituents of the dried leaves of Isodon eriocalyx (Dunn.) Hara led to the isolation of four new diterpenoids, named maoecrystal Q-T (1-4). Their structures were elucidated as $16(R)-methoxymethyl-6{\beta},\;7{\beta}-dihydroxy-7{\alpha},20-epoxy-ent-kaur-2,3-ethenylene-1$, 15-dione(1), $1{\beta},18-diacetoxy-6{\beta},7{\beta}-dihydroxy-7{\alpha},20-epoxy-ent-kaur-16-en-15-one\;(2),\;6{\beta},\;7{\beta}-dihydroxy-15{\beta}-acetoxy-7{\alpha},20-epoxy-ent-kaur-16-en-1-one$ (3) and $7{\beta}-hydroxy-6{\beta},15{\beta}-diacetoxy-1{\alpha},11{\beta}-acetonide-7{\alpha},20-epoxy-ent-kaur-16-ene$ (4), respectively, on the basis of spectroscopic methods. Meanwhile, five known diterpeonids eriocalyxin B (5), maoecrystal B-D (6-8) and trichokaurin (9) were also obtained.

  • PDF

Genetic Identification of the Kimchi Strain Using PCR-based PepN and 16S rRNA Gene Sequence (PepN과 16S rRNA Gene Sequence 및 PCR 방법을 이용한 김치 젖산균의 동정)

  • Lee, Myung-Ki;Park, Wan-Soo;Lee, Byong-H.
    • Korean Journal of Food Science and Technology
    • /
    • v.32 no.6
    • /
    • pp.1331-1335
    • /
    • 2000
  • The WL6 strain isolated from Kimchi could not be made scientific name because it was identified as three species, i.e., Leuconostoc mesenternides ssp cremoris, Leu. mesenteroides ssp. dextranicum or Lactobacillus bifermentans when it was tested by API kit or Biolog system methods. The unidentifiable WL6 strain was finally reclassified as Lactobacillus bifermentans by genetic identification using two PCR-based specific sequence primer sets which were originated from homologous pepN and 16S rRNA genes.

  • PDF

Formation of Superhydrophobic Surfaces on Fluoropolymer Films Using Ion Implantation

  • Park, Yong-Woon;Jo, Yong-Jun;Jung, Chan-Hee;Hwang, In-Tae;Choi, Jae-Hak
    • Journal of Radiation Industry
    • /
    • v.6 no.4
    • /
    • pp.323-328
    • /
    • 2012
  • In this study, a facile method to fabricate superhydrophobic surfaces on perfluoroalkoxy (PFA) films using ion implantation was developed. PFA films were implanted at 100 keV with a fluence ranging from $4{\times}10^{16}$ to $7{\times}10^{16}ions\;cm^{-2}$. The surface properties of the implanted films were investigated in terms of their surface morphology, wettability, and chemical composition. As the fluence increased to $6{\times}10^{16}ions\;cm^{-2}$, the surface morphology and surface roughness of the PFA films were dramatically changed. The PFA surface implanted at a fluence of $6{\times}10^{16}ions\;cm^{-2}$ showed a maximum contact angle (CA) of $157.1^{\circ}$, while the control CA of the smooth PFA surface was $103.6^{\circ}$. Thus, the superhydrophobic surface was successfully fabricated by ion implantation.

Performance Analysis of Convolution coded 16 QAM Signal with Selective Combining Diversity in Rician Fading and Impulsive Noise Environments (라이시안 페이딩과 임펄스 잡음이 존재하는 환경에서 선택 합성 다이버시티 기법과 길쌈 부호화 기법을 채용한 16 QAM 신호의 성능해석)

  • Kim, Kwang-Rak;Lee, Ho-Young;Kim, Eon-Gon
    • Proceedings of the KSR Conference
    • /
    • 2008.11b
    • /
    • pp.1303-1311
    • /
    • 2008
  • In this paper, we analyzed the error rate performance of convolution coded 16 QAM signal in impulsive noise Environments. We used convolution code and selective combining diversity for performance improvement. We analyzed the error rate performance of 16 QAM signal in impulsive noise environments compared with gaussian noise environments. As a result of analysis, there is a BER segment where the efficiency of system does not improve until which limit to raise a signal power potential from impulsive noise environment. when the signal power potential which goes over this limit is supplied, BER efficiency improve much more.

  • PDF

PWR 16×16 사용후핵연료 집합체 해체장치 개념설계

  • Kim, Yeong-Hwan;Lee, Jae-Won;Lee, Han-Su;Park, Geun-Il;Lee, Jeong-Won;Jo, Gwang-Hun
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2012.10a
    • /
    • pp.83-84
    • /
    • 2012
  • SF 집합체 해체장치 개념설계요건 설정을 위해서 PWR $16{\times}16$ SF집합체 제원을 분석하였다. 또한 집합체 해체장치 주요요건을 도출하여 핵심메커니즘을 도출하였다. 주요요건은 다음과 같다. 집합체의 최대 clamping 힘은 각 grid의 경우: 240 kg, 하부노즐의 경우: 900 kg이다. 3 축 방향에서 절단을 위한 정확한 위치공자는 ${\pm}0.25mm$이다. 또한 처분을 위해 cuttings, fines 및 다양한 hardware를 수거하는 기능을 제공해야 한다. SF 집합체 해체를 위하여 드릴링 방식을 채택하였다. PWR SF의 종류에 따라 드릴링 위치가 다르기 때문에 위치제어와 해제장치 하단과 중간에 있는 X, Y, Z 제어를 할 수 있는 구조로 고안 하였다. SF 집합체 해체장치는 국내에서 가동되는 모든 PWR SF 집합체를 해체할 수 있는 구조로서 범용성을 가지고 있다. 원격 유지보수성을 향상하기 위하여 Solid Works 프로그램 툴(tool)을 이용하여 8개의 주요 모듈을 구성하였고, SF 집합체 해제장치 개념을 3D로 설계하였다.

  • PDF