• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1597-1600
• /
• 2003

Fine-Blanking is an advanced and precision stamping process, by which a component with precise geometry and smooth cut surface can be produced without any further major secondary operations. By applying the Fine-Blanking technology, the significant improvement of the component should be obvious. As the components are with good shape, smooth surface and precise size, they can be ready for assembly without any further secondary operations. The productivity is increased, the production cycle time and the component cost are significantly reduced. We apply the fine-Blanking for chain sprocket. And do Mecanical test for compress strenth. impaact, roughness, Brinell hardness, dimensional stability.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1590-1597
• /
• 2007

This paper deals with the noise source localization of the Korean High Speed Train (KTX) at the speed of 300 km/h. Using Microfonarray system and beamforming technology typical pass-by noise sources and their frequency characteristics are investigated. It is primarily aimed at investigating the location and characteristics of the high speed train emission. The results from the microphone array tests are also analyzed in relation to the remarks from analytic studies and experimental investigations on the high speed train that have been done with the intention of understanding the interior noise mechanism. The acoustical image shows the low frequency noise sources mainly at the position of the under part of the train at high speeds and the related source mechanism are discussed.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1597-1599
• /
• 1996

In this study, we investigated the electrical characteristics such as tracking resistance, dielectric constant, insulating resistance, and arc resistance, of silicone rubber for outdoor use, and, focused on the tracking resistance. In the Inclined Plane Test, two kind of the contamination solutions were used, and their phenomena were observed. The average leakage current and the tracking breakdown time decreased, and erosion rate increased, using anionic surfactant added contaminant solution. The dielectric constant and dissipation factor were increased with increasing temperature.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1597-1600
• /
• 2005

현재까지 네트워크 관리 시스템의 주요 대상은 유선 기반 네트워크였다. 본 논문에서는 그 대상을 Ad-hoc 네트워크에 두었다. Ad-hoc 네트워크 환경에서는 라우팅이 이동 노드 간에 이루어지게 되는데, 이와 같은 Ad-hoc 네트워크에서는 단말기들이 자유롭게 이동하므로 기존의 유선망에서 사용하던 라우팅 프로토콜을 그대로 사용하기에는 라우팅 정보의 정확성이나 라우팅 정보 교환으로 인한 오버 헤드로 인해서 적합하지 않으므로 이에 적합한 라우팅 기법을 요구한다. 본 논문에서는 Ad-hoc 네트워크의 관리를 위해, 현재까지 연구되고 제안된 라우팅 프로토콜 중에서 확장성과 안정성을 고려한 하이브리드 방식의 ZRP(Zone Routing Protocol)를 사용하는 방안과 그에 따른 프레임워크를 제시하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1596-1597
• /
• 1998

This study is an experiment using the non-thermal plasma for removal of NOx, SOx. This experimental setup is made up the superposing discharge electrode in order to increase the removal. Both electrode are plate and niddle electrode, back of plate installed the lower electrode making pure silver. The result of the superposing discharge is thought that the rate of removal increase by means of rising effect. This is studied the property to the U.V irradiation and temperature dependence of the flue gas.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1597-1599
• /
• 1997

Disordered carbon materials for anode of lithium rechargeable batteries were showed much larger reversible capacity than graphite. In this paper, we studied the electrochemical characteristics of PPP-based carbon, one of the disordered carbon, as adding with different amount of graphite. PPP-based carbon with 30wt% of graphite showed large reversible capacity, ${\sim}286mAh/g$, irreversible capacity ${\sim}299mAh/g$, and small hysteresis between discharge and charge in carbon/Li cell.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1594-1597
• /
• 2002

In this paper, we proposed the IEEE 802.11 CSMA/CA protocol with the priority scheme. The IEEE 802.11 CSMA/CA protocol is the standard in wireless LAN We applied the proposed method to the aeronautical mobile telecommunication environment. The CSMA/CA protocol has two frames : one is PCF frame for real time service like voice and image and the other DCF frame for contention services like data transmission. Now we proposed the priority scheme that has the different CW region according to the transmitted data. The simmulation results shows the proposed method's performance is improved, Because the collision probability is reduced by allowing the different CW between stations. And the time dalay results show the priority scheme is very appropriated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1597-1600
• /
• 2000

현재의 무선 이동통신은 음성통화를 위주로 설계되어 사용되고 있다. 그러나 차츰 인터넷 접속과 같은 데이터 통신 요구가 증대되고 있으며, 특히 이미 가시화된 IMT-2000과 4세대 이동통신망이라 할 수 있는 ALL-IP 망에서는 동영상을 포함한 멀티미디어 서비스에 대한 욕구를 수용하기 위한 연구가 활발히 진행되고 있다. 본 논문에서는 유선 구간에 비해 자원의 제약이 큰 무선 구간에서의 효율적인 자원 할당을 위한 QoS(Qualify of Service) 협상자를 설계하였다. 협상의 전제가 될 수 있는 서비스 등급을 대역폭 할당의 가변 여부에 따라 세 등급으로 분류하였으며, 협상 에이전트는 이 정보들을 기반으로 요구 대역폭과 서비스 종류에 따라 협상을 통해 대역폭 할당량을 정의한다. 이에 따라 QoS 관리자가 적절한 자원을 할당하게 함으로써 전체적인 무선자원의 활용도를 높이도록 하였다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1593-1597
• /
• 2009

A biosensor has been developed based on induced wavelength shifts in the Fabry-Perot fringes in the visible reflection spectrum of appropriately derivatized thin films of porous silicon semiconductors. Porous silicon (PSi) was generated by an electrochemical etching of silicon wafer using two electrode configurations in aqueous ethanolic HF solution. Porous silicon displayed Fabry-Perot fringe patterns whose reflection maxima varied spatially across the porous silicon. The sensor system studied consisted of a mono layer of porous silicon modified with Protein A. The system was probed with various fragments of an aqueous Human Immunoglobin G (Ig G) analyte. The sensor operated by measurement of the Fabry-Perot fringes in the white light reflection spectrum from the porous silicon layer. Molecular binding was detected as a shift in wavelength of these fringes.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.6
• /
• pp.1597-1600
• /
• 2007

This study was designed to investigate the effect of Bee Venom Acupuncture on Ligament Relaxation. The patient was treated with Bee Venom Acupuncture Therapy, Acupuncture and Microwave. Bee Venom Acupuncture Therapy was administered at fibroosseous junction of the relaxed ligament. We evaluated the patient through Visual Analogue Scale(VAS) and Range of Motion(ROM), tenderness. Atter treatment, the patients showed that clinical symptoms was disappeared, VAS changed from 10 to 1 and there was no limitation of ROM. According to the result, Bee Venom Acupuncture Therapy may have rapid effects on the Ligament Relaxation. But further studies are required to prove the effect of Bee Venom Acupuncture Therapy of Ligament Relaxation