• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.169-173
• /
• 2008

Bacillus subtilis subsp. subtilis constitutes 90% of the total viable bacteria present on Capsosiphon fulvescens. We found that hydrogen peroxide (50 ppm) and NaOCl (50 ppm) were more effective than electrolyzed water (EW, 50ppm) against B. subtilis subsp. subtilis that was isolated from this seaweed. Relative to a control, 50 ppm hydrogen peroxide reduced the total viable population by $1.8{\pm}0.4$ log CFU/g, whereas 50 ppm EW increased the total viable population by $1.7{\pm}0.5$ log CFU/g. CFUs were evaluated following 30 days of storage at $4^{\circ}C$ using air- and vacuum-packaging. Samples treated with 50 ppm hydrogen peroxide and NaOCl showed a $1.6{\pm}0.1$-fold decrease in initial hardness ($7.9{\times}10^6dyne/cm^2$), while the samples treated with 50 ppm EW had a $2.1{\pm}0.1$-fold decrease in initial hardness ($7.9{\times}10^6dyne/cm^2$). Again, measurements were performed after storage at $4^{\circ}C$ for 20 days. This study indicates that B. subtilis subsp. subtilis is the most common contaminant in aerobically or anaerobically packaged seaweed and should therefore be the main target for quality control during long-term storage. Hydrogen peroxide and NaOCl are more effective than EW in inhibiting B. subtilis subsp. subtilis and in reducing total bacterial loads in air- and vacuum-packaged seaweed.

• Journal of Environmental Health Sciences
• /
• v.26 no.4
• /
• pp.49-57
• /
• 2000

This study was carried out to find the optimal condition to treat refractory organic matter which can’t treat clearly with biological treatment and to find the optimal division dosage and division dose timing in the modification of Fenton oxidation which is used resolve the problem that hydrogen peroxide is too expensive. The results are following; 1. The highest TOC removal efficiency was 41% and color removal efficiency was 64% when the dilution magnitude of leachate is fold. This suggests that dilution is efficiency when high concentration of leachate is treated. 2. The removal efficiency of TOC and color increased up to the molar ratio between ferrate and hydrogen peroxide was 1:1. However above that ratio, removal efficiency hardly increased. The highest removal efficiency of TOC and color were 38% and 71% when the mole ratio of ferrate to hydrogen peroxide was 1.5:1. 3. When the mole ratio between ferrate and hydrogen peroxide was fixed, the removal efficiency of TOC and color increased as the dosage of hydrogen peroxide increased. 4. pH of samples were adjusted at pH 3, 5, 7, 9, 11. After oxidation reaction, pH of samples were dropped to 2.59, 2.54, 5.34, 6.36 and 9.68. The highest color removal efficiency was 75.7% when initial pH was at pH 7. 5. The removal of TOC and color was ended within 10. min. and the removal efficiency increased logarithmically within 10min. However after 10 min., the removal efficiency of hardly increased. 6. The color removal efficiency was higher with modification of fentone oxidation than that with fentone oxidation by 5%. Optimal division dosage ratio was 1:1 and optimal dose timing ratio was 2:1. However the TOC removal efficiency was not higher with modification of Fenton oxidation than that with Fenton oxidation.7. The CO $D_{Mn}$ /BO $D_{5}$ Ratio decreased with the time went by. It meant bioresolution increased as time went by. However, after 15 min., the CO $D_{Mn}$ /BO $D_{5}$ Ratio did not decrease any more. 8. In the case of $H_2O$$_2$ Divisiom Dose experiment, the increase of bioresolution was highest at the $H_2O$$_2$ Division dosage Ratio of 3:7.3:7.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.4
• /
• pp.295-301
• /
• 2014

PURPOSE. Numerous methods were used to etch the fiber posts to improve its bonding to root canal dentin. Our aim was to evaluate the efficacy of 37% phosphoric acid in etching fiber posts in comparison with 24% hydrogen peroxide. MATERIALS AND METHODS. Ninety human maxillary central incisors were taken and post space preparation was done. Ninety fiber posts were taken and divided into three groups (n=30) based on the surface treatment they received ($H_3PO_4$, $H_2O_2$, distilled water) and each group was further divided (n=10) based on the time period of application (15 seconds, 30 seconds, 60 seconds). All the posts were luted into canals using Rely X UniCem-2. Each tooth was then sectioned into six slices and subjected to push out test. Data obtained was subjected to statistical analysis at P<.05. The surface topography was evaluated using scanning electron microscopy. RESULTS. Highest bond strength values were noted in 15 seconds etched phosphoric acid group and 60 seconds etched hydrogen peroxide group with no significant difference between two groups. Surface topography revealed complete epoxy layer removal with no damage to its structural integrity in those groups. CONCLUSION. $H_3PO_4$ etching for a period of 15 seconds is an effective alternative in improving the adhesion of fiber post to root dentin.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.56-62
• /
• 2011

An experimental study on design of a catalytic ignitor was performed to use an ignition source for a small bi-propellant liquid rocket engine which use hydrogen peroxide and kerosene as propellants. In the catalytic ignitor, hot gas of hydrogen peroxide which was decomposed by a catalyst induced autoignition of kerosene. Mass flow rate and O/F ratio for the ignitor were calculated by CEA code. A combustion chamber which had a quartz window and thermocouples was manufactured to determine whether the ignition is successful. Ignition performance was investigated according to exit area of fixed rings and mixture ratio. Results showed that reliable ignition performance was achieved at non-choking exit area of fixed ring and O/F ratio of 6~8.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.15-21
• /
• 2000

In chlorine dioxide delignification and bleaching the formation of chlorate is undesirable because it does not react with lignin and is harmful to the environment. Chlorate is mainly formed from the in-situ generated hypochlorus acid which is also the main reason for AOX formation. In previous literature scavengers of hypochlorous acid such as sulfamic aicd, DMSO, and hydrogen peroxide have been added to bleaching stages to reduce AOX formation but less attention has been paid to chlorate reduction. This paper thus focuses on the reduction of chlorate content caused by the following additives, sulfamic acid, DMSO, hydrogen peroxide, and oxalic acid. The results show that only sulfamic acid and DMSO reduce chlorate formation under our chlorine dioxide prebleaching conditions. Results by UV spectroscopy and pH adjustment show that scavengers react with hypochlorous acid much faster than with chlorine. Hydrogen peroxide and oxalic acid react with HClO/$Cl_2$much slower than DMSO and sulfamic acid do. The reason for the ineffectiveness of hydrogen peroxide and oxalic acid is ascribed to their slow reaction rates with HClO compared to that of chlorate formation. The fact that only 30-35% of the chlorate can be reduced by sulfamic acid and DMSO when charged in same mole ratio to chlorine dioxide, suggested that the reaction rate of DMSO and sulfamic acid with hypochlorous aicd are of the same magnitude as that of chlorate formation.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.9
• /
• pp.3009-3016
• /
• 2012

This study evaluated the use of iron-impregnated SBA-15 (Fe/SBA-15) as a catalyst for the oxidative degradation of persistent phenol analogues, such as 2-chlorophenol (2-CP), 4-chlorophenol (4-CP), 2-nitrophenol (2-NP), 4-nitrophenol (4-NP) and 2,4,6-trichlorophenol (2,4,6-TCP) in water. The oxidation reactions were carried out with reaction time, concentration of the phenols, amount of the catalysts, reaction temperature, pH of the reaction mixture as the process variables with or without using hydrogen peroxide as the oxidizing agent. The conversion achieved with Fe/SBA-15 at 353 K for 2-CP, 4-CP, 2-NP, 4-NP, 2,4,6-TCP was 80.2, 71.2, 53.1, 62.8, 77.3% in 5h with a reactant to $H_2O_2$ mole ratio of 1:1, and 85.7, 65.8, 61.9, 63.7, 78.1% in the absence of $H_2O_2$, respectively. The reactions followed pseudo first order kinetics. The leachability study indicated that the catalyst released very little iron into water and therefore, the possibility of secondary pollution is negligible.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.8-17
• /
• 2006

Laboratory scale experiments were performed to investigate the removal efficiency of the in-situ chemical oxidation method and the air-sparging method for diesel contaminated soil and groundwater. Two kinds of diesel contaminated soils (TPH concentration : 2,401 mg/kg and 9,551 mg/kg) and groundwater sampled at Busan railroad station were used for the experiments. For batch experiments of chemical oxidation by using 50% hydrogen peroxide solution, TPH concentration of soil decreased to 18% and 15% of initial TPH concentration. For continuous column experiments, more than 70% of initial TPH in soil was removed by using soil flushing with 20% hydrogen peroxide solution, suggesting that most of diesel in soil reacted with hydrogen peroxide and degraded into $CO_2$ or $H_2O$ gases. Batch experiment for the air-sparging method with artificially contaminated groundwater (TPH concentration : 810 mg/L) was performed to evaluate the removal efficiency of the air-sparging method and TPH concentration of groundwater decreased to lower than 5 mg/L (waste water discharge tolerance limit) within 72 hours of air-sparging. For box experiment with diesel contaminated real soil and groundwater, the removal efficiency of air-sparging was very low because of the residual diesel phase existed in soil medium, suggesting that the air-sparging method should be applied to remediate groundwater after the free phase of diesel in soil medium was removed. For the last time, the in-situ box experiment for a unit process mixed the chemical oxidation process with the air-sparging process was performed to remove diesel from soil and groundwater at a time. Soil flushing with 20% hydrogen peroxide solution was applied to diesel contaminated soils in box, and subsequently contaminated groundwater was purified by the air-sparging method. With 23 L of 20% hydrogen peroxide solution and 2,160 L of air-sparging, TPH concentration of soil decreased from 9,551 mg/kg to 390 mg/kg and TPH concentration of groundwater reduced to lower than 5 mg/L. Results suggested that the combination process of the in-situ hydrogen peroxide flushing and the air-sparging has a great possibility to simultaneously remediate fuel contaminated soil and groundwater.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.533-541
• /
• 2012

Objectives : The purpose of this study was to evaluate the effects of tooth bleaching agent contained 35% hydrogen peroxide on the color, microhardness and surface roughness of tooth-colored restorative materials. Methods : Four types of tooth-colored restorative materials, including a composite resin(Filtek Z350 ; Z350), a flowable composite resin(Filtek P60 : P60), a compomer(Dyract$^{(R)}$ AP ; DY), and a glass-ionomer cement(KetacTM Molar Easymix ; KM) were used in the study. The specimens($8mm{\times}5mm$) were made by using a customized acrylic mold. Each material was divided into two groups equally(n=40) : experimental group(35% HP) and control group(distilled water). 35% HP group was treated 30 mim/5 days for 15 days. Each 30 minute treatment session consisted of two 15 minute cycles of gel application with 20 second light exposure. The authors measured the color, microhardness, and roughness of the specimens before and after bleaching. The data were analyzed with ANOVA and T-test. Results : 35% HP group showed an apparent color change(${\Delta}E^*$) than control group. In particular, DY and KM showed a noticeable color change and statistically significant differences(p<0.05). 35% HP group showed a reduction in microhardness. Z350 and P60 does not have a statistically significant difference(p>0.05), DY and KM showed a statistically significant difference(p<0.05). Percentage microhardness loss(PML) of control group was 0.6 to 5.5% in the group, 35% HP group was 6.6 to 34.6%. Roughness was increased in 35% HP group after bleaching. Especially DY and KM were significantly increased(p<0.05). Conclusions : Bleaching agents may affect the surface of existing restorations; therefore, they should not be used indiscriminately when tooth-colored restorations are present.

• Environmental Analysis Health and Toxicology
• /
• v.13 no.3_4
• /
• pp.105-115
• /
• 1998

Reactive oxygen species (ROS) are highly reactive molecules due to their unpaired electron. They have been suspected as one of the major tissue damage inducers in biological metabolic systems. Antioxidant enzymes, such as catalase and superoxide dismutase, could not repair all the oxidative damages resulting from those excessive toxic ROS. It is, therefore, urgent to develop effective antioxidants to relieve from the oxidatire damages. In this study antioxidative effects were investigated by using two flavonoids such as quercetin and naringenin and a flavonoid-rich extract, Ginkgo biloba extract in combination with paraquat that is known as a strong generator of oxygen radicals. The results are summeringed as follows: 1. To assess radical scavenging ability reduction concentrations (IC$_{50}$) of 1,1-diphenyl-2-picrylhydrazine (DPPH) within 15 minutes were measured. The values of the IC$_{50}$ of quercetin and Ginkgo biloba extract were 15.4 $\mu$M and 13.2$\mu$g/ml, respectively. Their radical removing activities showed concentration-dependent manners. 2. In the hydrogen peroxide assay by using PMS-NADH system, quercetin, naringenin and Ginkgo biloba extract led to removing hydrogen peroxide in concentrationdependent manner whose removing abilities at 100$\mu$M or 100 $\mu$g/ml were 75.6, 25.8 and 26.0%, respectively. 3. In the hydrogen peroxide-induced rat blood hemolysis assay all three compounds led to similar effects whose hemolysis inhibition ratios at 100$\mu$M or 100$\mu$g/ml were 68.0, 5.14 and 55.8%, respectively. 4. In the xanthinee oxidase assay by measuring degree of NADH oxidation in the presence of hypoxanthine and xanthinee oxidase, both quercetin and Ginkgo biloba extract showed excellent activities showing 42.8 and 24.2% inhibiting xanthine oxidase activity at 100$\mu$M or 100$\mu$g/ml concentrations, respectively.

• International Journal of Oral Biology
• /
• v.46 no.1
• /
• pp.15-22
• /
• 2021

Alpha-lipoic acid (ALA) is a naturally occurring antioxidant and has been previously used to treat diabetes and cardiovascular disease. However, the autophagy effects of ALA against oxidative stress-induced dopaminergic neuronal cell injury remain unclear. The aim of this study was to investigate the role of ALA in autophagy and apoptosis against oxidative stress in the SH-SY5Y human dopaminergic neuronal cell line. We examined SH-SY5Y phenotypes using the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide assay (cell viability/proliferation), 4′,6-diamidino-2-phenylindole dihydrochloride nuclear staining, Live/Dead cell assay, cellular reactive oxygen species (ROS) assay, immunoblotting, and immunocytochemistry. Our data showed ALA attenuated hydrogen peroxide (H2O2)-induced ROS generation and cell death. ALA effectively suppressed Bax up-regulation and Bcl-2 and Bcl-xL down-regulation. Furthermore, ALA increased the expression of the antioxidant enzyme, heme oxygenase-1. Moreover, the expression of Beclin-1 and LC-3 autophagy biomarkers was decreased by ALA in our cell model. Combined, these data suggest ALA protects human dopaminergic neuronal cells against H2O2-induced cell injury by inhibiting autophagy and apoptosis.