• Journal of Environmental Science International
• /
• v.17 no.2
• /
• pp.203-210
• /
• 2008

The batch tests were performed to determine the ratio of Fenton reagent on diesel contaminated soil. The objective of a column test was to determine and optimize the hydrogen peroxide requirements for the remediation of a soil contaminated with diesel fuel. The batch test were done on 5 g diesel contaminated soil containing hydrogen peroxide (35%) and Iron (II) sulfate. The $H_2O_2(g):Fe^{2+}(g)$ ratio varied 1:0, 30:1, 15:1, 5:1, 1:1, with contact reaction time 120min. Initial diesel concentration were 2,000 mg/kg, 5,000 mg/kg, and 10,000 mg/kg. Average diesel removal from the contaminated soil is 97% after 2hrs. Results of this study showed possible application of without addition of iron source. In column test, treatment of a diesel-contaminated soil (initial diesel concentration: 2,000 mg/kg, 5,000 mg/kg, and 10,000 mg/kg) with hydrogen peroxide (35%) only was containing natural-occurring minerals. The time required for the column test was approximately 90min, 180min, 270min; column length was 5 em, 10 em, and 15 em. The most effective stoichiometry (final diesel cone.: $200{\sim}300mg/kg$) of 0.2 g peroxide consumed/mg diesel degraded. Further investigation is required to identify the effect of soil organic matter and soil mineral.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.116-122
• /
• 1999

The purpose of this study is to develop new process named "hydrogen peroxide dissolution method". This process used hydrogen peroxide, which is harmless to human body and oxidize molybdenum wire selectively.The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of molybdenum wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved molybdenum. This study was aimed at gathering the basic data of molybdenum wire dissolution-recovery process and proposes the reaction condition of molybdenum wire dissolution-recovery process and the factors influencing those reactions. The results were as follows:1. In the dissolution of molybdenum wire, the early condition of reaction was $15^{\circ}C$, and the temperature condition of state was $32^{\circ}C$. 2. 1) In the GSL-60W type, P.W.(Piece weight) was 11.89mg, C.R. was $65.6\Omega$. 2) In the FL-20W type, P.W. was 11.60mg, C.R. was $4.6\Omega$. 3. The molybdenum of process water was treated of a precipitation after dry and after stagnation in the one day, the molybdenum of upper water was treated of precipitation after dry and after congelation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.1-12
• /
• 2007

The purpose of this study was to evaluate the effect that various concentration and application time of hydrogen peroxide had on tooth whitening and physical properties. The hydroxyapatite (HA) discs of $12mm({\Phi}){\times}1.2mm(t)$ in dimensions were made by compression $(100kg/cm^2)$ and sintering (at $1350^{\circ}C$ for 2 hours) All specimens were polished sequentially with '240 through '2000 emery paper and one side of each specimen was polished finally with $0.3{\mu}m$ alumina paste. The discs were placed in sterile whole stimulated saliva overnight at $37^{\circ}C$ in order to form an in vitro pellicle layer. Then the discs were rinsed with distilled water and soaked into staining broth at $37^{\circ}C$ for 7 days. These stained specimens were bleached with hydrogen peroxide according to the change of concentration $(3{\sim}30%)$ and application time ($3{\sim}10$ days). The specimens were analyzed with a spectrophotometer, X-ray diffractometer (XRD), scanning electron microscope (SEM), surface roughness tester, microhardness tester and biaxial flexural strength. The results of present study can be summarized as follows : 1. The bleaching effect was increased with the increased concentration and the extended application time of hydrogen peroxide. 2. The surface roughness was significantly increased from the specimen bleached with 15% hydrogen peroxide for 10 days and with 30% for 7 and 10 days respectively (p<0.05). 3. The changes of crystal phase observed by XRD between before and after bleaching weren't shown of any difference, but microporous structure of surface observed by SEM was shown of increase with the increased concentration and the extended application. 4. The biaxial flexural strength was significantly decreased from bleaching of specimen with 30% hydrogen peroxide for 7 and 10 days respectively (p<0.05) 5. Microhardness was significantly decreased from bleaching with 15% hydrogen peroxide for 10 days and with 30% for 3, 7 and 10 days respectively (p<0.05). Although the tooth bleaching effect was greater when the high concentration was applied, further in vivo experiment will be needed to prove it's safety.

• Microbiology and Biotechnology Letters
• /
• v.27 no.3
• /
• pp.197-202
• /
• 1999

To confirm the effects of binlang(Areca catechu L.) and tansen(Salvia miltriorrhiza bung) on the mutagenicity induced by hydrogen peroxide, SOS Chromotest with Escherichia coli PQ37 and Ames test with Salmonella typhimurium TA104 were perlormed. Methanol-soluble parts of their water extracts showed high inhibitory effect against the mutagenicity of hydrogen peroxide in two bacterial mutation assays. Step-wise fractionation of methanol-soluble part from tansen was done using ethyl acetate, butanol and water. Among these fraction was further partitioned by Sephadex LH-20 column chromtography, and 6 subfractions were obtained. The fraction III showed the strongest inhibitory effects against the mutagenic activities induced by hydrogen peroxide. The inhibition rates of fraction III at concentration of 500$\mu\textrm{g}$/assay were 28%, 30% and 15% against 4-NQO, MNNG and B(a)P, respectively. But the mutagenic potency of AFB1 was increased.

• Journal of fish pathology
• /
• v.15 no.3
• /
• pp.111-115
• /
• 2002

The scuticocilliate, Uronema marinum is a histophagous ciliate and the causative agent of 'scuticociliatosis'in cultured olive flounder Paralichthys olivaceus. In the present study, in vitro efficacy of hydrogen peroxide, formalin and copper sulfate on the scuticocilliate at low salinity was investigated. Each chemical showed synergistic parasiticidal effects with low salinity (salinity in 5 ppt) compared to each chemical alone (salinity in 33 ppt). At low salinity (5‰), ciliates were killed completely within 1.5h by exposure to 50ppm formalin (37% formaldehyde), at 100ppm hydrogen peroxide (30% solution) and at 100ppm copper sulfate (20% solution). The formalin was the most effective chemical against the parasites at low salinity.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.197-201
• /
• 2017

A novel method for the detection of hydrogen peroxide in aqueous solution was developed via reaction between $H_2O_2$, trivalent titanium ion ($Ti^{3+}$) and 4-(2-thiazolylazo) resorcinol (TAR), resulting in a ternary complex with a maximum UV absorbance at 530 nm. The CE detection of $H_2O_2$ was fast, sensitive and cost-effective without pretreatment procedures. $H_2O_2$ was detected within 15 min at 1 to $100{\mu}M$ range with the lowest detection limit at $1.0{\mu}M$. Under the optimized CE conditions, the concentration of $H_2O_2$ in coffee or tea extract was quantitatively determined. Our results show that CE detection of the ternary complex of $H_2O_2-Ti^{3+}$-TAR has potential applications for the detection of $H_2O_2$ in aqueous sources.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.1
• /
• pp.101-108
• /
• 2014

Objectives : The purpose of this study was to evaluate the tooth whitening effect of 0.74% and 2.80% hydrogen peroxide toothpastes and safety on tooth and gingival tissue. Methods : Toothpastes containing 0.74% and 2.80% hydrogen peroxide were evaluated. In in-vitro test, some additives (sodium metaphosphate, sodium pyrophosphate and titanium dioxide) were added to the toothpastes. Hydroxyapatite specimens (HAPs) were made and stained using modified Stookey's methods. HAPs were treated for 1 hour at shaking incubator and brushed for 1,000 times as 250 gF with each diluted toothpaste. Before and after color was measured by colorimeter. Using double blind method, 99 Korean with natural maxillary anterior teeth were selected and the initial brightness (baseline) was measured by SHADEEYE-EX. Based on this measurement they were crossly distributed into control group (0% hydrogen peroxide), test 1 (0.74% hydrogen peroxide) and test 2 (2.80% hydrogen peroxide). After 2 weeks, people of each group were provided toothpaste and told to use 3 times a day right after every meal for 3 minutes. The brightness of teeth was measured 3 times for every one month. Results : ${\Delta}L$ was statistically significant among three groups in shaking test. ${\Delta}L$ of two test groups was statistically significant compared with control group but not between each test group in brushing test. After using toothpaste for 3 months, test 1 group and test 2 group were 15.89% and 31.23% more whitened compared with control group respectively (p<0.05). Rate of more whitened person of each test group was 24.2% and 40.5% more than control group respectively (p<0.05). There was no difference in the hypersensitivity during 3 months using toothpastes and no side effect on teeth or gums. Conclusions : Toothpastes containing 0.74% and 2.80% hydrogen peroxide showed tooth whitening effect and both were safe enough to use for tooth whitening.

• Journal of Environmental Science International
• /
• v.26 no.1
• /
• pp.23-28
• /
• 2017

This study was aimed at determining the changes in heavy metal removal efficiency at different acid concentrations in a micro-nanobubble soil washing system and pickling process that is used to dispose of heavy metals. For this purpose, the initial and final heavy metal concentrations were measured to calculate the heavy metal removal efficiency 5, 10, 20, 30, 60, and 120 min into the experiment. Soil contaminated by heavy metals and extracted from 0~15 cm below the surface of a vehicle junkyard in the city of U was used in the experiment. The extracted soil was air-dried for 24 h, after which a No. 10 (2 mm) was used as a filter to remove large particles and other substances from the soil as well as to even out the samples. As for the operating conditions, the air inflow rate in the micro-nano bubble soil washing system was fixed at 2 L/min,; with the concentration of hydrogen peroxide being adjusted to 5%, 10%, or 15%. The treatment lasted 120 min. The results showed that when the concentration of hydrogen peroxide was 5%, the efficiency of Zn removal was 27.4%, whereas those of Ni and Pb were 28.7% and 22.8%, respectively. When the concentration of hydrogen peroxide was 10%, the efficiency of Zn removal was 38.7%, whereas those of Ni and Pb were 42.6% and 28.6%, respectively. When the concentration of hydrogen peroxide was 15%, the efficiency of Zn removal was 49.7%, whereas those of Ni and Pb were 57.1% and 42.6%, respectively. Therefore, the efficiency of removal of all three heavy metals was the highest when the hydrogen peroxide concentration was 15%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.2
• /
• pp.140-148
• /
• 2018

As the global warming causing desertification increase, there is growing concern about damage of crops. It was to investigate how the treatment with hydrogen peroxide before leaf development affects the growth and yield of sorghum for minimizing a damage of crops to drought. The germination experiment was conducted at alternating temperature of $25^{\circ}C/20^{\circ}C$(12 hr/12 hr) under water stress condition of 0 ~ -0.20 MPa adjusted with PEG solution containing 0 and 10 mM $H_2O_2$. In order to know the effect of foliar application of hydrogen peroxide on the growth of sorghum, 10 mM hydrogen peroxide was treated to leaves at 3-leaf stage of sorghum growing in greenhouse conditions. Seed germination rate was increased by 20% in hydrogen peroxide treatment as compared to the Control. under water stress conditions (-0.15 ~ -0.20 MPa). The length of seedlings was also on the rise by the hydrogen peroxide treatment. In the greenhouse pot experiment, the morphological characteristics (plant height, stem diameter, leaf length, and leaf number) and physiological characteristics (chlorophyll content, chlorophyll fluorescence (Fv/Fm), stomatal conductance) were higher in the plants treated with hydrogen peroxide under the drought stress condition than those of plants of $H_2O$ treatment. Experiment conducted with the soil moisture gradient system showed that the foliar application of hydrogen peroxide increased photosynthetic ability of sorghum plant with respect to SPAD value and stomatal conductance and rooting capacity (root weight and root length) under drought condition. Generally, hydrogen peroxide treatment in sorghum increased the tolerance to drought stress and maintained better growth due to ameliorating oxidative stress.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.6
• /
• pp.340-348
• /
• 2015

Removal efficiency of PCBs in contaminated marine sediments treated by Fenton-like oxidation combined with surfactant was investigated in this research in order to achieve remediation of PCBs. A washing treatment using various concentrations of hydrogen peroxide (1% and 15%) and surfactants (Triton X-100, Tween 60 and Tween 80) was evaluated at various conditions in laboratory scale experiments. The mean removal efficiencies of tPCBs varied from 24.1 to 46.7% in the sediments for 1 hour duration of the treatments. The concentration of tPCBs in contaminated marine sediments after the simultaneous treatment with hydrogen peroxide and surfactant satisfied the domestic environmental standards for the beneficial use of sediments. When suitable surfactant was used for Fenton-like oxidation, the removal efficiency of tPCBs at low concentration of hydrogen peroxide was similar to that at high hydrogen peroxide concentration. Thus the efficient removal of PCBs in contaminated marine sediments could be achieved through treatment with Fenton-like oxidation combined with surfactant washing.