• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.33-37
• /
• 2003

A low-power $1{\times}2$ polymeric thermo-optic switch with a trench structure is proposed and fabricated. The trench structure in the optimized region slows down the heat flow from the electrodes, which contributes to the reduction of power consumption. The temperature distribution in the polymer layers has been adjusted to increase the temperature gradient between the two arms of the Y-branch. For comparison, a $1{\times}2$ polymeric thermo-optic switch with no trench structure is fabricated together on the same substrate. In the device with a trench structure, the measured crosstalk is less than -17.0 dB for TE polarization.-15.0 dB for TM polarization. The power consumption is about 66 mW, which is 25% less than that of the device with no trench structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1791-1796
• /
• 2011

An optical fiber short period grating of 0.7 nm as a 3 dB wavelength linewidth was fabricated using a Gaussian distributed KrF Eximer laser and a phase mask. This grating has temperature dependancy of 0.01 nm/$^{\circ}C$ over the range of -10 $^{\circ}C$ ~ 70 $^{\circ}C$and no difference between temperature directions. An optical fiber long period grating of 14.22 nm as a 3 dB linewidth was also fabricated using a amplitude mask and has dependancy of 0.01 nm/$^{\circ}C$ over the same range.

• Journal of information and communication convergence engineering
• /
• v.14 no.4
• /
• pp.246-251
• /
• 2016

In this study, we developed a reduced 94 GHz hybrid ring coupler on a GaAs substrate in order to demonstrate the possibility of the integration of various passive components and MMICs in the millimeter-wave range. To reduce the size of the hybrid ring coupler, we used multiple open stubs on the inside of the ring structure. The chip size of the reduced hybrid ring coupler with multiple open stubs was decreased by 62% compared with the area of the hybrid ring coupler without open stubs. Performance in terms of the loss, isolation, and phase difference characteristics exhibited no significant change after the use of the multiple open stubs on the inside of the ring structure. The reduced hybrid ring coupler showed excellent coupling loss of $3.87{\pm}0.33dB$ and transmission loss of $3.77{\pm}0.72dB$ in the measured frequency range of 90-100 GHz. The isolation and reflection were -48 dB and -32 dB at 94 GHz, respectively. The phase differences between two output ports were $180^{\circ}{\pm}1^{\circ}$ at 94 GHz.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.177-182
• /
• 2015

In a MPC(Multi-Pulse Coding) using excitation source of voiced and unvoiced, it would be a distortion of voice waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration. To solve this problem, this paper present APC-MPC of amplitude-position compensation in a multi-pulses each pitch interval in order to reduce distortion of synthesis waveform. Also, I was implemented that the APC-MPC in coding system. And I evaluate the SNRseg of APC-MPC in 8kbps coding condition of convergence system. As a result, SNRseg of APC-MPC was 13.9dB for female voice and 14.3dB for male voice respectively. And so, I expect to be able to this method for cellular phone and smart phone using excitation source of low bit rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1025-1033
• /
• 2012

Fabry-Perot cavity(FPC) antennas with artificial magnetic conductor(AMC) surface are designed in order to provide scan capability by $4{\times}1$ array feed inside the cavity. The proposed antenna, excited by $4{\times}1$ thinned array, not only achieve higher directivities but also improve suppression of sidelobe level(SLL) relative to that of the thin array alone. The FPC antenna with the height of a quarter wavelength generate maximum gain of 19 dB, SLL suppression of 14 dB and maximum scan angle of $8^{\circ}$ under the feed phase difference of $90^{\circ}$ at the design frequency of 12 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.71-79
• /
• 1990

An analog phase shifter is designed at the operating frequency 10GHz that is coupled with a hybrid ring and the network connecting an inductor series with a varactor to extend a continuous chage in the phase of the reflected output wave to be produced from a variation in the terminated varactor reactance as a variation in the reverse bias voltage. It is manufactured in a microstripline in consideration of an effect of the dispersion characteristics and discontinuities. As a resuls of an experiment, a change in the phase is achieved over 180 degree from $52.34^{\circ}$ degrees to $235.01^{\circ}$degrees, the transmission loss is -3.6~-14.3dB, and the return loss is -16~-8dB(1.37

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.96-102
• /
• 2010

This paper proposes a new adaptive algorithm to cancel the acoustic feedback and noise signals in the digital hearing aids. The proposed algorithm improves its convergence performances by canceling the speech signal from the residual signal using two microphones. The feedback canceller firstly cancels the feedback signal among the mic signal, and then it is reduced the noise using the beamforming method. To verify the performances of the proposed algorithm, the simulations were carried out for some cases. As the results of simulations, it was proved that the feedback canceller and the noise canceller advance about 14.43 dB for SFR, 10.19 dB for SNR respectively during speech, in the case of using the new algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.805-810
• /
• 2019

Recently, a majority of 4G mobile telecommunication manufacturers prefer repeaters with good adaptability. In this paper, we propose a new LMF(: Least Means Fourth) algorithm for LTE(: Long Term Evolution) RF(: Radio Frequency) Repeater. The proposed algorithm is a modification of the LMF, which appropriately adjusts the step size and improves performance according to the Sign function. The steady state MSE(: Mean Square Error) performance of the proposed LMF algorithm with step size of 0.009 is low level at about -25dB, and the proposed LMF algorithm requires 500 less iterations than the conventional algorithms at MSE of -25dB.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.10-16
• /
• 2024

Microstrip directional couplers using microstrip lines do not have good directivity characteristics because the dielectric constant of the substrate is different from that of air. To solve this problem, a compensation capacitor is sometimes attached between the coupling lines to improve directivity. This paper proposes a directional coupler with high directivity using interdigital capacitors implemented with transmission lines instead of lumped capacitors. The directional coupler designed and fabricated using the proposed method showed a coupling factor of 20 dB and a directivity of higher than 30 dB at 2.14 GHz. This directional coupler can be used as two directional couplers because it has two coupling ports and two isolated ports.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.