• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.445-450
• /
• 1995

AIN 완충층을 이용하여 대기압 유기금속에피텍셜 (MOVPE)법으로 사파이어 기판위에 성장시킨 AlGaN/GaN 이중 이종접합구조(double heterostructure : DH)의 고밀도 광여기에 의한 자외선 영역에서의 단면모드 유도방출 특성에 대하여 조사하였다. 실온에서 여기광 밀도 200kW/$cm^{2}$에서 방출된 AlGaN/GaN DH의 유도방출 피크파장과 반치폭은 각각 369nm와 22.4meV이었으며, 80K의 온도에서는 각각 360.1nm와 13.4meV이었다. 고밀도 광여기에 의하여 단면모드 자외영역 유도방출을 얻기에 필요한 입사광 밀도의 임계치는 실온과 80K의 온도에서 각각 89kW/$cm^{2}$와 44kW/$cm^{2}$이었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.97-98
• /
• 2005

양성자 조사법에 의하여 고속 전력용 다이오드를 제작하기 위하여 punch-through 다이오드에 다양한 조건으로 양성자를 조사하였다. 동일한 소자에 전자선을 조사한 소자와 속도 향상을 위한 공정이 행하여지지 않은 동일한 소자 각각의 특성을 비교 분석하였다. 양성자 주입은 주입 에너지를 1 MeV 와 1.3 MeV로, 각 에너지 조건에서 도즈를 $1\times10^{12}cm^{-2}$, $1\times10^{13}cm^{-2}$로 변화 시켰다. 분석 결과 양성자 주입된 소자에서 역방향 회복시간은 최소 소자의 약 45%, 전자선이 조사된 소자에 비하여 약 73 %의 값으로 향상시킬 수 있었으며 역방향 항복 전압과 순방향 저항은 처리되지 않은 소자와 전자빔이 조사된 시편들의 값과 비슷한 값을 나타내었다.

• Journal of Radiation Industry
• /
• v.8 no.1
• /
• pp.59-63
• /
• 2014

Proton Induced X-ray Emission (PIXE) is a MeV ion beam analysis method for use with particle accelerators. PIXE uses low-energy charged particles as an excitation mechanism to generate characteristic x-ray emission from each element in a target. In PIXE analysis, the beam current used is from a few nA to several tens of nA. Chosun University (Cyclotron Research Center) designed a $50{\mu}A$ beam line from the 13 MeV cyclotron for use with a PIXE analysis system, as well as performing beam transport line optimization research. In this study, the beam line operation conditions for the optimization process of beam transport and beam characteristics are shown.

• Progress in Medical Physics
• /
• v.13 no.2
• /
• pp.69-73
• /
• 2002

Exposure measurement data with parallel plate ionization chambers were known to depend on the polarity ($k_{pol}$) effect. In this work, the polarity effect were investigated for three parallel plate ionization chambers with different volume. The ionization chamber was fabricated using acrylic plate for the chamber medium and printed circuit board for electrical configuration. The various sizes of the sensitive volumes designed so far were 0.9, 1.9, and 3.1 co. High voltage generator was fabricated using the conventional 9 V batteries to apply the high voltage (300-500 V) to the electrode of the parallel plate ionization chamber. The gap between two electrodes ranged from 3, 6, and 10mm. As the result of our experiment, the polarity effect was within 0.5% in photon beam and 1% to 3.5% in the electron beams. Among electron beams, 16 MeV beam, which had highest energy, showed less polarity effect than electron beams with other energies.

• Journal of Ginseng Research
• /
• v.21 no.1
• /
• pp.13-18
• /
• 1997

Identification and changes of physiologically active substances during chilling storage of dehisced ginseng (Panax ginseng C. A. Meyer) seeds were analyzed using various preparatory separation methods and purification columns; Dowex 50W and silica gel columns. Seven components with Rf values of 0.20, 0.40, 0.58, 0.66, and 0.70 In solvent system, $CHCl_3$:MeOH=3:1 (v/v), Rf values of 0. 63 and 0.74 in solvent system, $CHCl_3$:MeOH:$H_2O$:=7:3:1 (v/v) were obtained through Dowex 50W and silica gel column chromatographies. Two components with Rf values of 0.20 and 0.63 in the all chilling treatments were detected in the extract obtained through both chromatographies, and only the former component was gradually increased till 4 weeks of chilling storage and then rapidly decreased from 8 to 16 weeks. UV spectra of Rf values of 0.66 and 0.56 were similar to that of cytokinin, but their physiological activities were not found. Rf values of 0.20 showed activity by radish cotyledon expansion bioassay. The component with Rf value of 0.20 was revealed to have a naphthalene in the proposed chemical structure by various NMR techniques.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.917-924
• /
• 2019

The passive scattering system nozzle of the proton therapy accelerator was simulated to evaluate the neutrons generated by each component in each nozzle by energy. The Monte Carlo N-Particle code was used to implement spread out Bragg peak with proton energy 220 MeV, reach 20 cm, and 6 cm length used in the treatment environment. Among the proton accelerator components, neutrons were the highest in scatterers, and the neutron flux decreased as it moved away from the central flux of the proton. This study can be used as a basic data for the evaluation of the radiation necessary for the maintenance and dismantling of proton accelerators.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.241-246
• /
• 2019

Among the 4th Industrial Revolution technologies, evaluated bolus applicability through dose assesment according to the materials of 3D printing technology. Dose assesment was using MCNPX which was applied Monte Carlo method and 3D print materials were ABS, PC and PLA. Thus, the thickness with the same effect as the bolus 10 mm was found to be ABS 10 mm, PC 9 mm and PLA 9 mm for the 6 MeV electron. For 6 MV X-ray, ABS 11 mm, PC 10 mm and PLA 9 mm were shown. This study showed that tissue equivalent materials made from 3D printer materials can replace bolus.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.45-52
• /
• 2006

This study was carried out to explore the accuracy of Near Infrared Reflectance Spectroscopy (NIRS) fer the prediction of digestibility and energy value of corn silages. The spectral data were regressed against a range of digestibility and energy parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with first and second order derivatization, with scatter correction procedure(SNV-Detrend) to reduce the effect of extraneous noise. Calibration models for NIRS measurements gave multivariate correlation coefficients of determination$(R^2)$ and standard errors of cross validation of 0.92(SECV 1.73), 0.91(SECV 1.13) and 0.93(SECV 1.74) for in vitro dry matter digestibility(IVDMD), in vitro true digestibility(IVTD), and cellulase dry matter digestibility(CDMD), respectively. The standard error of prediction(SEP) and the multiple correlation coefficient of validation$(R^2v)$ on the validation set(n=39) was used in comparing the prediction accuracy. The SEP value was 0.30(TDN), 0.01(NEL), and 0.01(ME). The relative ability of NIRS to predict digestibility and energy value was very good for CDMD, total digestible nutrients(TDN), net energy fer lactation(NEL) and metabolizable energy(ME). This paper shows the potential of NIRS to predict the digestibility and energy value of con silage as a routine method in feeding programmes and for giving advice to farmers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.1038-1047
• /
• 2008

This study aimed at targeting fixed increases in body weight (100 g/wk) by quantitatively regulating energy allowances (ME) in broiler breeders from 5 to 20 wks of age. Four energy regimes were tested: 1. The energy required for maintenance, activity and growth was calculated for 100 g increases in body weight/wk and a measured quantity of grower diet (160 g protein and 2,600 kcal ME/kg) was offered to the control group (ME-100) to achieve the anticipated weight gain. The energy allowances increased with age from 132 to 294 kcal/d. 2. Additionally, three energy regimes were considered, quantitatively reducing ME by 10% (ME-90) or 20% (ME-80) and increasing by10% (ME-110) over the control group. Each test group had 23 replicates5 female chicks housed in cages. The influence of energy regimes and age on growth, nutrient digestibility, carcass attributes, bone parameters and stress was evaluated at 4 wk intervals. Quantitative ME restriction by 10% (119-265 kcal/d) produced an average weight gain of 98.1 g/wk, which was closer to the targeted increase of 100 g/wk, whereas the control group attained it nine days earlier. Restriction of energy by 10 or 20% produced better conversion efficiency of feed, energy and protein and apparent digestibility of protein, Ca and P than 10% excess ME. Energy regimes did not influence eviscerated meat yield, but higher energy allowances (ME-110) significantly increased abdominal fat pad and liver weights and decreased giblet weight, percent muscle protein and tibia ash. Relatively higher stress was recorded in ME-restricted groups, as reflected by wider heterophil and lymphocyte ratios and increased bursa weight. Early age (5-12 wk) significantly influenced bone mineralization, conversion efficiency of feed, energy and protein and apparent digestibility of protein, Ca and P, while later ages (13-20 wk) increased eviscerated meat yield, abdominal fat, tibia weight and muscle protein and reduced stress. Energy regime x age interactions were significant and are discussed. In conclusion, the synthetic broiler line used in our study responded positively to controlled energy feeding during the rearing period. Breeders offered 119-265 kcal/d, a reduction of 10% energy over the control group, were more effective in regulating grower performance than the latter. In addition to energy regimes, age intervals also exhibited significant influence on specific parameters during the grower phase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.125-126
• /
• 2006

The stochiometric mix of evaporating materials for the $CdGa_2Se_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films. $CdGa_2Se_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CdGa_2Se_4$ single crystal thin films measured from Hall effect by van der Pauw method are $8.27{\times}10^{17}cm^{-3}$. $345cm^2/V{\cdot}s$ at 293 K, respectively. From the photoluminescence measurement on $CdGa_2Se_4$ single crystal thin film, we observed free excition ($E_x$) existing only high quality crystal and neutral bound exiciton ($D^{\circ},X$) having very strong peak intensity. Then. the full-width-at -half-maximum(FWHM) and binding energy of neutral donor bound excition were 8 meV and 13.7 meV, respectivity. By Haynes rule. an activation energy of impurity was 137 meV.