• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.41-44
• /
• 2013

As appearance of high-quality service such as UDTV application, high-speed and high-capacity communication services are required. For this, communication systems increase the data processing speed and use various error correction techniques. In this paper, we implement the Viterbi decoder applied in 1000BASE-T with 4 pairs UTP cable. The minimum operating speed of the Viterbi decoer should be more than 125 MHz because 125 MHz PAM-5 signal is transmitted on each pair of cables in 1000BASE-T. To do this, we implement the decoder by using the pipeline and parallel processing and verify the operation with 125 MHz by using a logic analyzer. Finally, we will show that the decoder recovers the original data for the added random error data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1579-1588
• /
• 2014

The LAN method is the most widely used in domestic high-speed internet access and rapidly moving to 1 Gbps Ethernet from 100 Mbps one to provide high-speed services such as UHD TV. The 1000BASE-T PHY with 4 pairs UTP transmits a PAM-5 signal at the 125 MHz clock per each pair to achieve 1 Gbps rate. In order to correct errors over the channel, the transmitter uses a TCM which is combined the convolutional encoder and PAM-5, and the receiver uses the Viterbi decoder. In this paper, we implement a Viterbi decoder which can correct two pair errors and operate at the least 125 MHz clock speed. Finally, we will verify the error correction function and the operating speed of the implemented decoder with a logic analyzer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1150-1158
• /
• 2011

More than 100 Mbps rate is needed in the UBcN for a subscriber to receive broadband traffics with multi-channel like UDTV or 3DTV. Although the optical fiber is recently deployed for the FTTH, the UTP is the most widely used medium and will be used in UBcN age. Network providers may consider the 1000BASE-T or the vectorized VDSL if they adopts the UTP in the place where does not have optical fibers. But UTP should be expanded because 1000BASE-T and vectorized UTP needs 4 and 3 pairs cable, respectively while residential region has not exceeding 2 pair UTP cable. To solve the problem, we propose a 500BASE-T technology using 2 pairs UTP in this paper. The technology introduces a rate adaptation sublayer and a SERDES sublayer above and under the PCS, respectively. The rate adaptation sublayer is compatible for the GMII. Also, if we modify the SERDES sublayer, the technology can easily obtain 250BASE-T with 2 pairs UTP. We implement such functions with FPGA and analog board and verify the function of rate adaptation and symbol vector synchronization, and effective transmission rate by experiments. In particular, we show that link efficiency is increased by enable control in the rate adaptation sublayer.

• Information and Communications Magazine
• /
• v.16 no.12
• /
• pp.112-120
• /
• 1999

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.349-352
• /
• 1996

When the ideality factor of collector current of AIGaAs/GaAs Heterojunction Bipolar Transistors (HBTs) is larger than unity, conventional $I_{CO}$ / $T^2$ versus 1000/T plot used in the determination of the barrier height of base-emitter junction of HBT was deviated from the straight line. We introduced the effective temperature $T_{eff}$ as nT in the Thermionic-emission equation. The modified $I_{CO}$ /TB versus 1000/ $T_{eff}$ plot was on the straight line in the temperature range considered. The activation energy obtained from the modified plot is 1.61 eV. The conduction band discontinuity calculated using this value was 0.305 eV and this value is coincident with the generally accepted value of 0.3 eV. eV.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.335-450
• /
• 1986

The thermodynamic dissociation constants of $[Co(en)]_3Cl_3\;and\;[Co(NH_3)_6Cl_3$ in aqueous solutions at $25{\circ}$ and at the pressure from 1 bar to 2000 bars were measured by conductometric method. The dissociation constants were increased with pressure elevation because of volume decreasing by the formation of charged ions during dissociation reaction. That is, the $pK^T$ values of $[Co(en)]_3Cl_3$ were 2.16 for I bar, 2.08 for 500 bars, 2,08 for 1000 bars, 2.05 for 1500 bars and 2.03 for 2000 bars, respectively and those of $[Co(NH_3)_6Cl_3$ were 2.02 for 1 bar 1.96 for 500 bars, 1.90 for 1000 bars, 1. 88 for 1500 bars and 1. 87 for 2000 bars, respectively. Comparing and analyzing the values of Stokes' radii and $K^T$, the formation of ion pair compound was affected by not only the electrostatic interaction, but also the Interal Conjugate Base(ICB), which was increased by the elevation of the pressure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.85-91
• /
• 2005

Radiative heating of a liquid rocket base plane due to plume emission is numerically investigated. Calculation of flow and temperature fields around rocket nozzle precedes and thereby realistic plume shape and temperature distribution inside the plume are obtained. Based on the calculated temperature field, radiative transfer equation is solved by discrete ordinate method. With the sample rocket plume, the averaged radiative heat flux reaching the base plane is calculated about 5 kw/m$^{2}$ at the flight altitude of 10.9 km. This value is small compared with radiative heat flux caused by constant-temperature (1500 K) plume emission, but it is not negligibly small. At higher. altitude (29.8km), view factor between the base plane and the exhaust plume is increased due to the increased expansion angle of the plume. Nevertheless, the radiative heating disappears since the base plane is heated to high temperature (above 1000 K due to convective heat transfer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.5
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.2
• /
• pp.73-80
• /
• 2003

An experiment was carried out at the Field Laboratory of the Department of Crop Botany, Bangladesh Agricultural University, Mymensingh from March to July, 2001 to investigate the effect of biofertilizers on morpho-physiological characters of okra. The experiment was laid out in a randomized complete block design with four replications. There were nine treatments such as $\textrm{T}_0$ (control), $\textrm{T}_1$ (Azotobacter biofertilizer), $\textrm{T}_2$ (Azospirillum biofertilizer), $\textrm{T}_3$ (Azotobacter+Azospirillum biofertilizers), $\textrm{T}_4$ (Azotobacter+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_5$ (Azospirillum+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_6$(Azotobacter+Azospirillum+Cowdung 5 ton $\textrm{ha}^{-1}$), $\textrm{T}_7$ (Cowdung 5 ton $\textrm{ha}^{-1}$) and $\textrm{T}_8$ (60% Nitrogen). The experimental results revealed that significant variations exist among the treatments regarding morphological characters e.g. plant height, number of leaves/plant, stem base diameter, tap root length, and physiological characters like, root dry weight, leaf area index and crop growth rate. Number of leaves/plant, stem base diameter, root length, root dry weight, leaf area index and crop growth rate were found higher in $\textrm{T}_4$, $\textrm{T}_5$, $\textrm{T}_6$ and $\textrm{T}_8$ than the others. In all the parameters, $\textrm{T}_8$ gave the similar result with biofertilizers in combination with cowdung treatments and $\textrm{T}_7$ showed identical with $\textrm{T}_0$ (control). Biofertilizer treatments had insignificant effect on 1000-seed weight(g). Experimental results mentioned above revealed that morpho-physioligical characters of okra could be modified by the application of biofertilizer+cowdung. However, biofertilizers+Cowdung treatments were comparable to $\textrm{T}_8$(60% Nitrogen) in this study. This suggests that $\textrm{T}_4$ or $\textrm{T}_6$ or $\textrm{T}_5$ were more benificial in environmentally friendly okra cultivation and may be used as an alternative of inorganic nitrogen by saving cost of production and sustaining productivity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.685-689
• /
• 2003

오늘날 급격히 증가되고 있는 광 대역 멀티미디어 서비스, 초고속 대용량 인터넷 서비스 등을 가입자에게 제공하기 위해서는 광 가입자망 기반의 네트워크 구성이 필수적이다. 최근 효율적이고 경제적인 광 가입자망 구축을 위한 기술들이 빠르게 개발됨에 따라 효율적인 네트워크 구성이 가능하게 되었다. 이중 대표적인 기술로 PON(Passive Optical Network)을 이용하여 ONN(Optical Network Unit)를 공유하는 방식의 WDM(Wavelength Division Multiplexing)-PON 기술이 있으며, 이를 이용한 FTTH(Fiber to The Home)시스템에 대한 개발이 활발히 이루어지고 있다. 본 논문에서는 100BASE-TX 및 1000BASE-T Ethernet 신호를 입력받아 파장별 DFB-LD에 직전 변조하는 방식을 사용하여 WDM-PON 시스템에 적용할 수 있는 광 송수신기를 설계하고 이를 구현하였다.