• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.7-14
• /
• 2010

This paper describes the effects of kinetic parameters such as attaching speed, attaching time, and dettaching speed on printing property of electrodes which were fabricated by micro-contact printing with Ag ink. In inking process the attaching speed was preferable to be less than 1 mm/s, attaching time as short as possible, and detaching speed larger than 1000 mm/s in order to obtain the transfer ratio of ink larger than 98%. Meanwhile in printing process the parameters were totally opposite to the results of inking process; attaching speed larger than 100 mm/s, attaching time larger than 30 sec, and detaching speed less than 1 mm/s for the best results. With the parameters we could obtain the micro-contact printed electrodes with the minimum line width of $30\;{\mu}m$, thickness of 300~500 nm, roughness less than 50 nm, and resistivity of about $15{\sim}16{\mu\Omega\cdot}cm$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.29.2-29.2
• /
• 2009

21세기 제 3의 산업혁명을 가져올 것으로 기대되는 나노기술(NT), 정보기술(IT), 바이오기술(BT)은 전 세계 과학자들의 마음을 사로잡고 있다. 이 가운데 나노기술은 전자산업에 응용 시 그 기대효과는 우리가 상상하는 이상의 것이라 예상하고 있다. 나노기술에 특히 관심을 가지는 이유는 물질이 마이크로미터 크기로 작아져도 벌크물질의 물리적 특성이 그대로 유지되지만, 나노미터 크기가 되면서 우리가 경험하지 못했던 새로운 물리적 특성들이 발현되기 때문이다. 그 특성에는 양자구속효과, Hall-Petch 효과, 자기효과 등이 있다. 나노기술의 구현은 양자점과 같은 영차원 나노입자, 나노와이어, 나노막대, 나노리본 등과 같은 직경이 100nm 이하의 일차원 구조의 나노물질 및 나노박막과 기타 100nm 이하의 나노구조물들이 사용된다. 현재 일차원 구조를 이용한 전자디바이스화 연구는 결정성장을 정확하게 조절하는 합성기술, 합성된 일차원 나노물질의 물리적 특성을 지배하는 각종 파라미터들과 물리적 특성들과의 상관관계 정립, 나노와이어를 이용한 Bottom-up 방식에 의한 조립기술 확보를 위해 활발히 진행 중이다. 하지만 나노구조의 특성을 확인하는 형태의 연구일 뿐, 실제 디바이스 구현에는 여전히 많은 과제를 안고 있다. 본 연구에서는 선택적 삼원계 단결정 씨앗층을 이용한 길이/직경 비가 매우 향상된 MgZnO 나노와이어를 interfacial layer 없이 수직으로 성장하여 산화물 전계방출 에미터로서의 가능성을 확인하였다.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.1
• /
• pp.41-56
• /
• 2021

The characteristics of the six rock cleavages(R1~H2) in Jurassic Hapcheon granite were analyzed using the distribution of ① microcrack lengths(N=230), ② microcrack spacings(N=150) and ③ Brazilian tensile strengths(N=30). The 18 cumulative graphs for these three factors measured in the directions parallel to the six rock cleavages were mutually contrasted. The main results of the analysis are summarized as follows. First, the frequency ratio(%) of Brazilian tensile strength values(kg/㎠) divided into nine class intervals increases in the order of 60~70(3.3) < 140~150(6.7) < 100~110·110~120(10.0) < 90~100(13.3) < 80~90(16.7) < 120~130·130~140(20.0). The distribution curve of strength according to the frequency of each class interval shows a bimodal distribution. Second, the graphs for the length, spacing and tensile strength were arranged in the order of H2 < H1 < G2 < G1 < R2 < R1. Exponent difference(λS-λL, Δλ) between the two graphs for the spacing and length increases in the order of H2(-1.59) < H1(-0.02) < G2(0.25) < G1(0.63) < R2(1.59) < R1(1.96)(2 < 1). From the related chart, the six graphs for the tensile strength move gradually to the left direction with the increase of the above exponent difference. The negative slope(a) of the graphs for the tensile strength, suggesting a degree of uniformity of the texture, increases in the order of H((H1+H2)/2, 0.116) < G((G1+G2)/2, 0.125) < R((R1+R2)/2, 0.191). Third, the order of arrangement between the two graphs for the two directions that make up each rock cleavage(R1·R2(R), G1·G2(G), H1·H2(H)) were compared. The order of arrangement of the two graphs for the length and spacing is reverse order with each other. The two graphs for the spacing and tensile strength is mutually consistent in the order of arrangement. The exponent differences(ΔλL and ΔλS) for the length and spacing increase in the order of rift(R, -0.08) < grain(G, 0.14) < hardway(H, 0.75) and hardway(H, 0.16) < grain(G, 0.23) < rift(R, 0.45), respectively. Fourth, the general chart for the six graphs showing the distribution characteristics of the microcrack lengths, microcrack spacings and Brazilian tensile strengths were made. According to the range of length, the six graphs show orders of G2 < H2 < H1 < R2 < G1 < R1(< 7 mm) and G2 < H1 < H2 < R2 < G1 < R1(≦2.38 mm). The six graphs for the spacing intersect each other by forming a bottleneck near the point corresponding to the cumulative frequency of 12 and the spacing of 0.53 mm. Fifth, the six values of each parameter representing the six rock cleavages were arranged in the order of increasing and decreasing. Among the 8 parameters related to the length, the total length(Lt) and the graph(≦2.38 mm) are mutually congruent in order of arrangement. Among the 7 parameters related to the spacing, the frequency of spacing(N), the mean spacing(Sm) and the graph (≦5 mm) are mutually consistent in order of arrangement. In terms of order of arrangement, the values of the above three parameters for the spacing are consistent with the maximum tensile strengths belonging to group E. As shown in Table 8, the order of arrangement of these parameter values is useful for prior recognition of the six rock cleavages and the three quarrying planes.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.49-57
• /
• 2020

The KC-100 has completed civil type certification with the Ministry of Land, Infrastructure, and Transport, and is currently under development as an unmanned aerial vehicle as part of the Ministry of Land, Infrastructure, and Transport. The Certification Technology of small Unmanned Airplane system (CTsUA system), which is an unmanned KC-100, is being developed to enable the installation of heavy-duty mission equipment and long-time flight missions. This study investigated the process and results of analyzing various parameters such as aircraft weight, airspeed, flight altitude, required horsepower, and fuel consumption at each stage to construct a mission profile based on the operational concept of the CTsUA system. To maintain a maximum take-off weight of 3,600 lbs (1,633 kg), the analysis determined that the weight of the application equipment for the unmanned system should be kept below 80 lbs (36 kg).

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.412-425
• /
• 2004

The influence of expandable graphite (EG) on flame retardancy and foaming properties of the NBR/GTR foams was studied. The foaming properties were similar to those of NBR/GTR foams without EG when the EG contents were 10$\~$30 phr. The LOI values were increased with the EG content. For cone-calorimeter test, the data showed the trend similar to that from experiment. When the composition ratios of the compounds of NBR/GTR were 100$\~$0/80$\~$20 (w/w), and the EG contents were 10$\~$30 phr, we obtained high flame retardancy foams with low heat release rate (HRR), total heat release (THR), effective heat of combustion (EHC) and carbon monoxide yield (COY). The smoke density is similar to CO yield values obtained by the cone-calorimeter test. TGA analysis also showed the results approximately similar to those from the LOI and cone-calorimeter experiments.

• Speech Sciences
• /
• v.10 no.2
• /
• pp.129-143
• /
• 2003

Fundamental frequency (Fo), jitter, shimmer, and harmonics-to-noise ratio (NHR) have been measured to see their interactions between the parameters using Multi-Dimensional Voice Program (MDVP). 100 Korean normal adults (50 males and 50 females) ranging from their early 20's to their early 30's produced the eight sustained vowels including /a/, /i/, /u/, /c/, /e/,/$\varepsilon$/, /i/, and /e/. The subjects were asked to read the above vowels five times in isolation with the interval of five seconds, respectively. Male voices, on the average, showed 130.7 Hz in Fo, 0.6696% in jitter, 1.8151% in shimmer, and 0.12 in NHR, while female voices showed 232.8 Hz in Fo, 0.9222% in jitter, 1.9199% in shimmer, and 0.1098 in NHR. As to the correlation coefficient, it was found that for male speakers jitter vs. shimmer, shimmer vs. NHR, Fo vs. shimmer, and Fo vs. NHR are statistically significant. It was found that for female subjects jitter vs. shimmer and Fo vs. shimmer are statistically significant. However, it is concluded that the correlation coefficient in females are not meaningful in a practical way though they are all statistically significant.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.253-261
• /
• 2013

According to the measured results of KTX brake squeal noise in this study, high level brake noise occurred in a wide frequency range, 100~18,000Hz. To identify the sources of the brake squeal noise, unstable vibration modes due to brake disc/pad interaction were analyzed under various conditions by the finite element method. Complex eigenvalues for a brake unit with a disc and four pads were obtained. It was found that the real parts of the complex eigenvalues, that is, unstable vibration modes, were closely related to friction coefficients, pressure on the brake cylinders, elastic moduli of the components, and other conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.30-39
• /
• 1995

In this paper, study on implementation of FFT analyzer applied to CAT, A/D conversion module, DSP module and VXIbus interface module are implemented in hardware and calculation program and control software are implemented in DSP module and VXIbus interface module, respectively. The control of the modules using PC is realized in software. The real time bandwidth of the FFT analyzing device is 100KHz. At sampling rate of 200KHz and with 2048 point FFT, the result of applying sine, triangular and rectangular wave of 20KHz to FFT analyzing device is compared with the FFT analyzed results of Hewlett-Packard 3562A dynamic output range of -40dBV- +30dBV, correct results are obtained and results of applying 10KHz, 20KHz and 50KHz input are compared and the correct values are obtained.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.286-290
• /
• 1994

Lasing characteristics of an Er-doped fiber laser have been investigated at various conditions of resonator reflectivities and pump powers. Variation of the laser wavelength with various mirror reflectivities has been compared with the theoretical analysis based on absorption, gain spectra, and resonator parameters. The maximum slope efficiency of 38% was obtained with the resonator's mirror reflectivities of 100% and 4% on both sides, and the threshold powers were varied from 7.8 mW to 5.6 mW, and lasing wavelengths were varied $1.532\mum to 1.563\mum and 1.558 \mum to 1.570 \mum$ for 6 and 15.8 mlong Er-doped fiber, respectively, as the resonator reflectivities were changed from 0.0016 to 0.9.to 0.9.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.1
• /
• pp.37-45
• /
• 2012

In an effort to further exploit the peak ground-motion acceleration (PGA) information per second available in real time by the enacted law, bracketed summations of the PGA per second ($BSPGA_k$) for 30 seconds based on the records with a rate of 100 samples were compared with the cumulative absolute velocity (CAV) and earthquake intensities based on a worldwide database of records from small-to-large earthquakes. The CAV, currently in use as an earthquake damage indicator for nuclear power plants due to its strong correlation with the earthquake intensity, has the disadvantage of requiring a massive amount of digital data with a rate of more than 100 samples per second. The comparative study shows that the $BSPGA_k$ is well correlated with the CAV over the wide range of strong ground-motion levels, which suggests that the $BSPGA_k$ is one of the new promising ground-motion parameters especially useful for rapid earthquake alert notifications through an earthquake monitoring network. Based on the domestic database of records from small-to-moderate earthquakes with felt reports, it is also observed that the $BSPGA_k$ is comparable to the CAV and better than the PGA in predicting the intensity by using the correlation relation.