• Title/Summary/Keyword: 10 injection

Search Result 8,214, Processing Time 0.038 seconds

Analysis of the Characteristics of the Change in the Moisture Rate of Landfill with Recirculation Water Injection (재순환수 주입에 따른 매립장 함수율 변화특성 분석)

  • Kim, Young-Kyu;Choi, Won-Young;Chun, Seung-Kyu
    • Journal of Soil and Groundwater Environment
    • /
    • v.26 no.5
    • /
    • pp.39-48
    • /
    • 2021
  • Analysis of the change in water content and distribution was conducted according to the supply of recirculation water to a landfill. An excavation sample analysis showed that the recirculation water injection zone had water content 8.8% point higher than that of the non-injection zone, after 8 months of operation. And due to the influence of recirculation water supply by vertical wells in injection zones, the water content increases along with depth more clearly than non-injection zone. According to an electrical specific-resistivity survey after 13 months of operation, the water content got higher towards the bottom of the landfill. The water transmission coefficient is 8.72×10-4 cm/sec for injection zones and 3.36×10-5 cm/sec for the intermediate cover layer; analysis shows that the intermediate cover layer may affect the penetration velocity of water supplied by the horizontal injection tube. For the scientific design and operation of re-injection facilities, it was deemed necessary to follow-up research on the residence time and behavior of re-injection water considering the ratio of recirculation water supply in horizontal and vertical tubes, and pitcher coefficient of intermediate and waste layers.

How Effective Is the Injection Therapy in Foot and Ankle Disorder? (족부족관절 질환에서 주사 치료는 얼마나 효과가 있는가?)

  • Song, Ha Heon
    • Journal of Korean Foot and Ankle Society
    • /
    • v.25 no.1
    • /
    • pp.10-16
    • /
    • 2021
  • Evidence-based papers on the treatment of some chronic tendinopathy or ligament lesions using an injection in foot and ankle disorders have been reported, but there are few reports on the treatment of acute ankle ligament injury. On the other hand, some papers have reported a faster return to play for injection therapy that combines RICE (Rest, Icing, Compression, and Elevation) treatment and rehabilitation. Injection therapy can be used as an additional treatment for ankle ligament injury. Rather than having narrow-minded thinking about these treatments, it is important to make efforts to verify the safety and precautions of treatment and recognize them as a category of normal treatment. Continuous analysis and monitoring of these treatments can satisfy patients whose needs are changing rapidly.

Corrosion release behavior of alloy 690 and its application in high-temperature water with Zn injection

  • Liao, Jiapeng;Hu, Yousen;Li, Jinggang;Jin, Desheng;Meng, Shuqi;Ruan, Tianming;Hu, Yisong;Zhang, Ziyu
    • Nuclear Engineering and Technology
    • /
    • v.54 no.3
    • /
    • pp.984-990
    • /
    • 2022
  • Corrosion release behavior of Alloy 690 in high-temperature water was investigated under the conditions of injected Zn concentrations of 0 ppb, 10 ppb and 50 ppb. A protective oxide film composed of Zn(FexCr1-x)2O4 and Cr2O3 was formed with Zn injection, resulting in a better corrosion resistance. In comparison with the Zn-free condition, the corrosion release rate under the Zn-injection conditions was smaller. The corrosion release inhibiting factors were 1.7 and 1.9 under the conditions of 10 ppb and 50 ppb Zn-injection respectively. A foreseen application of the corrosion and corrosion release rates has been proposed and discussed.

Distribution of injected fat-soluble vitamins in plasma and tissues of nursery pigs

  • Jang, Young Dal;Rotering, Mikayla J.;Isensee, Paige K.;Rinholen, Kirsten A.;Boston-Denton, Carli J.;Kelley, Paige G.;Stuart, Robert L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.12
    • /
    • pp.1985-1990
    • /
    • 2020
  • Objective: The objective of this experiment was to investigate the effects of fat-soluble vitamin injection on plasma and tissue vitamin status in nursery pigs. Methods: A total of 16 pigs (initial body weight: 7.15±1.1 kg) were allotted to 2 treatments at d 7 post-weaning. Pigs were fed a corn-soybean meal-based basal diet with no supplemental vitamin A and i.m. injected with 300,000 IU of retinyl palmitate, 900 IU of d-α-tocopherol and 30,000 IU of vitamin D3 with control pigs having no vitamin injection. Blood (d 0, 3, 7, and 14 post-injection) and tissue samples (liver, brain, heart, lung, and muscle; d 7 and 14 post-injection) were collected from pigs. Retinyl palmitate, retinol, and α-tocopherol concentrations were analyzed in plasma and tissues, while plasma was assayed for 25-hydroxycholecalciferol (25-OHD3). Results: Plasma retinol and 25-OHD3 concentrations increased by the vitamin injection from d 3 to 14 post-injection (p<0.05) whereas plasma retinyl palmitate was detected only in the vitamin treatment at d 3 and 7 post-injection (115.51 and 4.97 ㎍/mL, respectively). Liver retinol, retinyl palmitate, and retinol+retinyl palmitate concentrations increased by retinyl palmitate injection at d 7 and 14 post-injection (p<0.05) whereas those were not detected in the other tissues. The d-α-tocopherol injection increased α-tocopherol concentrations in plasma at d 3 and 7 post-injection (p<0.05) and in liver, heart (p<0.10), and muscle (p<0.05) at d 7 post-injection. Conclusion: Fat-soluble vitamin injection increased plasma status of α-tocopherol, retinol, retinyl palmitate and 25-OHD3. As plasma levels decreased post-injection, vitamin A level in liver and vitamin E level in muscle, heart and liver increased. The α-tocopherol found in plasma after injection was distributed to various tissues but retinyl palmitate only to the liver.

Gravity-Injection Core Cooling After a Loss-of-SDC Event n the YGN Units 3 & 4

  • Seul, Kwang-Woo;Bang, Young-Seok;Kim, Hho-Jung
    • Nuclear Engineering and Technology
    • /
    • v.31 no.5
    • /
    • pp.476-485
    • /
    • 1999
  • In order to evaluate the gravity-injection capability to maintain core cooling after a loss-of-shutdown-cooling event during shutdown operation, the plant conditions of the Yong Gwang Units 3&4 were reviewed. The six cases of possible gravity-injection paths from the refueling water tank (RWT) were identified and the thermal-hydraulic analyses were performed using the RELAP5/MOD3.2 code. The core cooling capability was significantly dependent on the gravity-injection path, the RCS opening, and the injection rate. In the cases with the pressurizer manway opening higher than the RWT water level, the coolant was held up in the pressurizer and the system pressure continued increasing after gravity-injection. The gravity injection eventually stopped due to the high system pressure and the core was uncovered. In the cases with the injection path and opening on the same leg side, the core cooling was dependent on whether the water injected from the RWT passed the core region or not. However, in the cases with the injection path and opening on the different leg side, the system was well depressurized after gravity-injection and the core boiling was successfully prevented for a long-term transient. In addition, from the sensitivity study on the gravity-injection flow rate, it was found that about 54 kg/s of injection rate was required to maintain the core cooling and the core cooling could be provided for about 10.6 hours after event with that injection rate from the RWT. Those analysis results would provide useful information to operators coping with the event.

  • PDF

Studies of Thyroid Function Test Using Radioiodine by Intradermal Injection (방사성(放射性) 옥소(沃素) 피내(皮內) 주사(注射)에 의(依)한 갑상선(甲狀腺) 기능검사(機能檢査)에 관(關)한 연구(硏究))

  • Kim, Dong-Soo
    • The Korean Journal of Nuclear Medicine
    • /
    • v.6 no.1
    • /
    • pp.41-49
    • /
    • 1972
  • The author observed the thyroid $^{131}I$ uptake rate using an intradermal injection method. The amount of activity remaining at the site of intradermal injection of 0.1 ml. of $5{\mu}Ci.\;of\;^{131}I$ in physiologic saline was measured in 79 cases of hyperthyroidism and in 24 cases of hypothyroidism. The cases had been confirmed by clinical and laboratory findings, at the department of medicine, (radioisotope clinic) Pusan National University Hospital. Twenty-nine normal control cases were examined currently by the same technique during the period from Jan. 1967 to June 1970. The following results were obtained: 1. In the normal group, the ranges and mean values of the thyroid uptake 10, 15, 20, 25, 30 and 60 minutes after intradermal $^{131}I$ injection, were $0{\sim}10%(6.33{\pm}1.63),\;0{\sim}15%(7.83{\pm}2.12),\;0{\sim}15%(8.46{\pm}2.82),\;5.1{\sim}20%(9.66{\pm}2.27),\;5.1{\sim}25%(10.47{\pm}2.52),\;5.1{\sim}30%(13.03{\pm}4.42)$. 2. In the hyperthyroid group, the ranges and mean values of the thyroid uptake 10, 15, 20, 25, 30 and 60 minutes after intradermal $^{131}I$ injection were $5.1{\sim}45%(22.25{\pm}7.04),\;10.1{\sim}50%(28.32{\pm}6.67),\;15.1{\sim}55%(34.78{\pm}11.63),\;15.1{\sim}65%(37.95{\pm}7.72),\;20.1{\sim}65%(41.49{\pm}0.05)\;and\;20.18096(48.71{\pm}12.51)$. 3. In the hypothyroid group, he ranges of thyroid $^{131}I$ uptake by intradermal $^{131}I$ injection at 10, 15, 20, 25, 30 and 60 minutes lay between 0 and 10%, and the the mean values were $4.23{\pm}1.76,\;5.08{\pm}1.68,\;5.56{\pm}1.70,\;6.02{\pm}1.75,\;6.37{\pm}1.91\;and\;6.95{\pm}2.07$. 4. In conclusion, thyroid function test using an intradermal injection method in cases of hyperthyroidism, showed characteristic values which seemed to be of diagnostic significance.

  • PDF

1-D Model to Estimate Injection Rate for Diesel Injector using AMESim (디젤 인젝터 분사율 예측을 위한 AMESim 기반 1-D 모델 구축)

  • Lee, Jinwoo;Kim, Jaeheun;Kim, Kihyun;Moon, Seoksu;Kang, Jinsuk;Han, Sangwook
    • Journal of ILASS-Korea
    • /
    • v.25 no.1
    • /
    • pp.8-14
    • /
    • 2020
  • Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

Simulation and Experiment of Injection Molding Process for Superalloy Feedstock

  • Jung, Im Doo;Kim, Youngmoo;Park, Seong Jin
    • Journal of Powder Materials
    • /
    • v.22 no.1
    • /
    • pp.1-5
    • /
    • 2015
  • Powder injection molding is an important manufacturing technology to mass produce superalloy components with complex shape. Injection molding step is particularly important for realizing a desired shape, which requires much time and efforts finding the optimum process condition. Therefore computer aided engineering can be very useful to find proper injection molding conditions. In this study, we have conducted a finite element method based simulation for the spiral mold test of superalloy feedstock and compared the results with experimental ones. Sensitivity analysis with both of simulation and experiment reveals that the melt temperature of superalloy feedstock is the most important factor for the full filling of mold cavity. The FEM based simulation matches well the experimental results. This study contributes to the optimization of superalloy powder injection molding process.

A study on the stabilization characteristics of the diffusion flame formed behind a bluff body (Bluff Body 후류에 형성되는 확산화염의 보염특성에 관한 연구)

  • ;;An, Jin-Geun;Song, Kyu-Keun
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.19 no.12
    • /
    • pp.3344-3351
    • /
    • 1995
  • The stability of diffusion flame formed behind a bluff body with fuel injection slits was experimentally investigated in various fuel injection angles, fuel injection ratios, grids and extension ducts. The flame stability limits, temperature distributions and length of recirculation zones, direct photographs of flames were measured in order to discuss the stabilization mechanism of the diffusion flame. The results from this study are as follows. The fuel injection angle is an important factor in determining the flame stability. Stability limits can be improved by variety of the fuel injection ratio. When the grid and extension duct are set, stability characteristics are varied with the blockage ratios, grid intervals, and grid numbers. The recirculation zone not only serves as a steady ignition source of combustion stream but also governs the stabilization mechanism.

The Effect of Valve Geometry Variation on Injection Characteristics of Injection Valve for Marine Diesel Engines (선박디젤기관용 분사밸브의 형상변화가 분사특성에 미치는 영향에 관한 계산적 고찰)

  • Park, K.;Kim, S.Y.;Choi, C.W.
    • Journal of ILASS-Korea
    • /
    • v.10 no.1
    • /
    • pp.24-34
    • /
    • 2005
  • Injection technology is one of the important technologies in a diesel engine. Many studies have done on the injection system. In this study, the fuel chamber geometry, the orifice ratio and the needle lift of the injection valve for a marine diesel engine are varied, and simulated. The result shows that the nozzle hole size has influence on the rail pressure and injection duration sensitively. The decrease of the static pressure at the nozzle hole entrance and the increase of the dynamic pressure on the outlet surface are occurred with the increase of the nozzle hole diameter. The highest dynamic pressure of the outlet was occurred at the needle lift of 0.4mm and the nozzle hole diameter of 0.328mm in this test nozzle.

  • PDF