• Nuclear Engineering and Technology
• /
• v.48 no.1
• /
• pp.98-113
• /
• 2016

A reactor vessel level monitoring system measures the water level in a reactor during normal operation and abnormal conditions. A drop in the water level can expose nuclear fuel, which may lead to fuel meltdown and radiation spread in accident conditions. A level monitoring system mainly consists of a sensing line and pressure transmitter. Over a period of time boron sediments or other impurities can clog the line which may degrade the accuracy of the monitoring system. The aim of this study is to determine blockage in a sensing line using the energy of the composite signal. An equivalent Pi circuit model is used to simulate blockages in the sensing line and the system's response is examined under different blockage levels. Composite signals obtained from the model and plant's unblocked and blocked channels are decomposed into six levels of details and approximations using a wavelet filter bank. The percentage of energy is calculated at each level for approximations. It is observed that the percentage of energy reduces as the blockage level in the sensing line increases. The results of the model and operational data are well correlated. Thus, in our opinion variation in the energy levels of approximations can be used as an index to determine the presence and degree of blockage in a sensing line.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.75-82
• /
• 2012

Compared to off-line, on-line word-of-mouth has fast dissemination speed and extensive effects based on interactive features. Moreover, in the age of Web 2.0, on-line media has made consumers evolve from simple purchasers to producers, who intervene into product manufacturing through on-line WOM. According to this, this study is conducted to clarify how consumer's prosumer propensity affects WOM in detail when purchasing fashion products on-line through website interactivity and perceived usefulness of WOM. The results are as follows. 1. Consumer's prosumer propensity is classified in four dimensions: the propensity to participate, the propensity to relate, the propensity to amuse and the propensity to create. 2. The sample has shown low prosumer propensity overall, and there were no gender differences. 3. Testing structural equation model, it was clarified that the higher the consumer's prosumer propensity, the higher the consumer's evaluation of website interactivity and thus the greater the WOM effect through its perception of usefulness. 4. There were some differences in the path of structural equation model according to consumer's prosumer propensity. From the results, it can be concluded that consumer's prosumer propensity is a key factor in the on-line WOM. Therefore fashion businesses should actively utilize consumer's prosumer propensity to apply their opinion in the product planning stage or use it as the means of company-friendly viral marketing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.1
• /
• pp.118-124
• /
• 2004

In this paper, we present a indirect adaptive control method using a wavelet neural network (WNN) for the control of chaotic nonlinear systems without precise mathematical models. The proposed indirect adaptive control method includes the off-line identification and on-line control procedure for chaotic nonlinear systems. In the off-line identification procedure, the WNN based identification model identifies the chaotic nonlinear system by using the serial-parallel identification structure and is trained by the gradient-descent method. And, in the on-line control procedure, a WNN controller is designed by using the off-line identification model and is trained by the error back-propagation algorithm. Finally, the effectiveness and feasibility of the proposed control method is demonstrated with applications to the chaotic nonlinear systems.

• Journal of Korean Society of Transportation
• /
• v.10 no.1
• /
• pp.41-54
• /
• 1992

The purpose of this thesis is to construct a model to estimate the delay that vehicles arriving randomly will be experienced at an isolated singalized intersection. To do this the following objectives are set in this study: (i) An what distance a random arrival pattern occurs after a platoon of vehicles are dis-charged from the stop line; (ii) A model which estimates the average delay per through-vehicle with respect to the de-gree of saturation; and (iii) The relation between the stepped delay and average approach delay per vehicle. The following are the findings of this study: (i) A random arrival pattern on the first second and third lanes occur 300,400 and 300m downstream from stop line rdspectively. A random arrival pattern on lane group occurs 500m downstream from the stop line ; (ii) A model for the estimation of approach delay has been developed in such a way that up to x=0.7 the delay increases linearly and beyond 0.7 the delay increases rapidly in a form of second order polynomial due to high degree of saturation : and (iii) Approach delay equals approximately 1.21 times of stopped delay.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.145-150
• /
• 2015

This paper described the medium voltage high temperature superconducting cable thermal simulation and its application. New simulation method for HTS cable modeling using PSCAD/EMTDC is introduced in this paper. The developed simulation method consists of electrical model part and thermal model part. In electrical model part, power loss and thermal capacitance can be calculated in each layer, then the temperature of each layer can be calculated by power loss and thermal capacitance in thermal model part. This paper also analyzes the electrical and thermal characteristic in the case of normal operating condition and transient including single line to ground fault and line to line ground fault using new simulation method.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.5
• /
• pp.380-387
• /
• 2016

PURPOSE. The storage conditions of impressions affect the dimensional accuracy of the impression materials. The aim of the study was to assess the effects of storage time on dimensional accuracy of five different impression materials by cone beam computed tomography (CBCT). MATERIALS AND METHODS. Polyether (Impregum), hydrocolloid (Hydrogum and Alginoplast), and silicone (Zetaflow and Honigum) impression materials were used for impressions taken from an acrylic master model. The impressions were poured and subjected to four different storage times: immediate use, and 1, 3, and 5 days of storage. Line 1 (between right and left first molar mesiobuccal cusp tips) and Line 2 (between right and left canine tips) were measured on a CBCT scanned model, and time dependent mean differences were analyzed by two-way univariate and Duncan's test (${\alpha}=.05$). RESULTS. For Line 1, the total mean difference of Impregum and Hydrogum were statistically different from Alginoplast (P<.05), while Zetaflow and Honigum had smaller discrepancies. Alginoplast resulted in more difference than the other impressions (P<.05). For Line 2, the total mean difference of Impregum was statistically different from the other impressions. Significant differences were observed in Line 1 and Line 2 for the different storage periods (P<.05). CONCLUSION. The dimensional accuracy of impression material is clinically acceptable if the impression material is stored in suitable conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.4
• /
• pp.201-209
• /
• 2007

Line transect sampling in a sighting survey is one of most widely used methods for assessing animal abundance. This study applied distance data, collected from three sighting surveys using line transects for finless porpoise that were conducted in 2004 and 2005 off the west coast of Korea, to four models (hazard-rate, uniform, half-normal and exponential) that can use a variety of detection functions, g (x). The hazard-rate model, a derived model for the detection function, should have a shoulder condition chosen using the AIC (Akaike Information Criterion), as the most suitable model. However, it did not describe a shoulder shape for the value of g(x) near the track tine and underestimated g (x), just as the exponential model did. The hazard-rate model showed a bias toward overestimating the densities of finless porpoises with a higher coefficient of variation (CV) than the other models did. The uniform model underestimated the densities of finless porpoise but had the lowest CV. The half-normal model described a detection function with a shape similar to that of the uniform model. The half-normal model was robust for finless porpoise data and should be able to avoid density underestimation. The estimated abundance of finless porpoise was 3,602 individuals (95% CI=1,251-10,371) inshore in 2005 and 33,045 individuals (95% CI=24,274-44,985) offshore in 2004.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.299-307
• /
• 2016

This study aims to investigate effects of the length of the buoy and sand bag line on the loss of webfoot octopus pot. A numerical modeling and simulation was carried out to analyze the process that the pot gear affected by wave using the mass spring model. Through the simulation, tensions of sand bag line under various condition were investigated by length of buoy and sand bag line. The drag force and coefficient k of an artificial shell used in the webfoot octopus pot was obtained from an experiment in a circular water channel, and the coefficient k was applied to the simulation. To verify the accuracy of the simulation model, a simple test was conducted into measuring a rope tension of a hanging shell under flow. Then, the test result was compared with the simulation. The lengths of the buoy line in the simulation were 1.12, 1.41, 1.80, 2.23, 2.69, and 3.17 times of water depth. The lengths of sand bag line were 10, 20, 30, and 40 meters, and conditions of water depth were 8, 15, 22 meters. 4 meter height and 8 second period of wave were applied to all simulations. As a results, the tension of the sand bag line was decreased as the buoy and sand bag line were increased. The minimum tension of the sand bag line was appeared in conditions that the length of the buoy line is twice of water depth and the sand bag line length is over 40 meters (except in case of depth 8 meters.).

• Industrial Engineering and Management Systems
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2016

This paper presents a fast sequencing algorithm for a mixed model assembly line with multiple workstations which minimize the total utility work and idle time. We compare the proposed algorithms with another heuristic, the Tsai-based heuristic, for a sequencing problem that minimizes the total utility works. Numerical experiments are used to evaluate the performance and effectiveness of the proposed algorithm. The Tsai-based heuristic performs best in terms of utility work, but the fast sequencing algorithm performs well for both utility work and idle time. However, the computational complexity of the fast sequencing algorithm is O (KN) while the Tsai-based algorithm is O (KNlogN). Actual computational time of the fast sequencing heuristic is 2-6 times faster than that of the Tsai-based heuristic.