• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.8
• /
• pp.1365-1375
• /
• 1997

Jacket is the basic formal dress for working women, and one of the most frequently worn by them. It has, however, some problems caused by movement, depending on how well it fits. To improve fitness of jacket, this study compared and evaluated the state of fitness objectively by employing a numerical system in relation with clothing and body. We made three experimental jackets based on the previous jacket patterns and used Moire Photo-graphy to measure the amounts of space between clothes and body from the overlap cross section map. The results obtained from this study were summarized as follows; 1. According to the measurement result of the pattern by using the One-dimension measurement, the amount of ease in girth item for pattern B was larger than the other two patterns. The amounts of space of each part showed the difference of the positions of princess lines, and the different sizes of the darts. 2. From the result of Moire Photography, the wearing shapes of the experimental jackets were influenced by the characteristics of somatotype. In addition, we could analyze the differences of the patterns with Moire Photography. 3. The amounts of space for waist part was larger than those for other parts. Pattern B scored the largest amount of space for all parts compared with pattern A and C. 4. For only waist part, there existed a significant difference in the average amount of space for the three patterns.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.1-7
• /
• 2002

The developed patterns by direct writing of electron beam are measured by AFM, FESEM and optical profiler of WYKO NT3300. From different measurement methods, the measured linewidths of the patterns are shown a little bit wider than designed pattern size due to electrons scattering effect during direct writing of electron beam. The optimized conditions of these experiments are suggested and explained for the forming of structures below 0.1 ㎛ dimension size. Because of electron scattering effects from the different under layers such as Si, Si$_3$N$_4$ and aluminum, the developed pattern size is also influenced by the accelerated energy of electrons, dose, resist and soft and hard bake conditions in PMMA. The distributions of electron beam and calculations of backscattering coefficient are demonstrated by Monte Carlo simulation. From the measured results, the developed linewidth of PMMA/Al /silicon is shown a little bit wider than that of PMMA/Si$_3$N$_4$/silicon structure due to the backscattering effects.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.439-448
• /
• 2018

This thesis intends to suggest a new wedding dress pattern through researches on history and changes of wedding dress, researches on silhouette and details and analyses of existing basic patterns. In this study, to develop torso patterns of top dresses selected as preferred designs through literature reviews and company surveys, dress form sizes suitable for standard sizes were selected and study basic patterns were made using draping techniques. The study finds characteristics of body type dimension that is changed when wearing brassiere (hereinafter, 'bra') for wedding dress through customer surveys for development of basic patterns of wedding dress. That is, wearing wedding bra was used for the purpose of increasing the bust size and we will evaluate later whether this increase helps completeness of aesthetic impression through wearing evaluation. As the result, it was found out that top torso pattern wearing wedding bra made wearers feel more comfortable and in the aspect of aesthetic impression, it provided impacts on women's beautiful silhouettes. The effects of whether a bra is used or not on changes in patterns were reviewed through the degree of polymerization of finished patterns. When a bra for dresses was worn, the waist front length increased by1.7cm, the bust circumference increased by 2.1cm, and the amount of dart increased by 1.5cm in the patterns. A new torso pattern for top dresses, which will solve problems evaluated in each of the above from the aspect of composition of pattern by a method through analysis of existing basic patterns and multi-dimensional cut patterns wearing wedding bra, will be suggested.

• Journal of Periodontal and Implant Science
• /
• v.40 no.1
• /
• pp.19-24
• /
• 2010

Purpose: It has been suggested that primary implant stability plays an essential role in successful osseointegration. Resonance frequency analysis (RFA) is widely used to measure the initial stability of implants because it provides superior reproducibility and non-invasiveness. The purpose of this study is to investigate whether the fractal dimension from the panoramic radiograph is related to the primary stability of the implant as represented by RFA. Methods: This study included 22 patients who underwent dental implant installation at the Department of Periodontology of Seoul National University Dental Hospital. Morphometric analysis and fractal analysis of the bone trabecular pattern were performed using panoramic radiographs, and the implant stability quotient (ISQ) values were measured after implant installation using RFA. The radiographs of 52 implant sites were analyzed, and the ISQ values were compared with the results from the morphometric analysis and fractal analysis. Results: The Pearson correlation showed a linear correlation between the ISQ values of RFA and the parameters of morphometric analysis but not of statistical significance. The fractal dimension had a linear correlation that was statistically significant. The correlation was more pronounced in the mandible. Conclusions: In conclusion, we suggest that the fractal dimension acquired from the panoramic radiograph may be a useful predictor of the initial stability of dental implants.

• Korean Journal of Cleft Lip And Palate
• /
• v.14 no.1_2
• /
• pp.1-18
• /
• 2011

Skeletal malocclusion is the result of abnormal dimension and alignment of each skeletal component. Understanding on these mechanisms may help to elucidate the etiology of skeletal malocclusion and to establish population-oriented treatment plans. Attempts to subdivide the Angle's classification have been performed for Class III malocclusion, while few studies have been conducted for Class II malocclusion despite recent growing interests in Class II malocclusion. 200 adults (88 male, 112 female) with skeletal Class II malocclusion were collected and subdivided using cluster analysis, using the measurements representing the dimension and the alignment of each facial skeletal component. The properties of each cluster was grouped within the subjects and a comparison between the subjects and the control group (38 male, 35 female) with normal occlusion was performed. Six clusters were finally recognized in each male and female groups. The clusters in both genders were mainly characterized by the cranial base alignment, dimension of the posterior cranial base, dimension of the mandibular ramus and the degree of mandibular rotation. The results implicate that active treatment of mandible rather than the nasomaxillary complex may be primarily considered for the correction of Korean Class II skeletal pattern.

• Journal of dental hygiene science
• /
• v.16 no.5
• /
• pp.378-383
• /
• 2016

With change in the pattern of disease occurrence and increase in the interest in health, efforts to assess the health status on patients covering their subjective awareness at the same time as clinical and objective evaluation on health are continued. To measure health-related quality of life can be one of these efforts. This study was performed to evaluate the relevance of the quality of overall health-related-life and oral health condition. Also the second year (2014) materials in the 6th the National Health and Nutrition Survey were applied to this study. The factors affecting general health related quality of life measured by EuroQol-5 dimension (EQ-5D) have been confirmed by gender, age, education level, income level, private health insurance, perceived health status, toothache experience during the last 1 year, remaining tooth number. As oral health plays an important role in determining the overall health conditions, objective oral health state influences the whole body health. Hence, it can be regarded that oral health is ultimately related to the general health-related quality of life.

• Journal of Family Resource Management and Policy Review
• /
• v.4 no.2
• /
• pp.45-56
• /
• 2000

The purpose of this research was to categorize the type of family financial well-being based on objective and subjective dimension. And this study was intended to explore the relations not only those types and the demographic characteristics but also those types and family subsystem; personal subsystem and managerial subsystem. The results of this study were as follows: 1. The type of family financial well-being were categorized as ‘Adequated type’, ‘Dissatisfying type’, ‘Satisfying type’, and ‘Unadequated type’. 2. The objective variables effect the family financial well-being rather then subjective variables. 3. The family cohesion, adjustment and communication pattern and intentional managing efforts increase the family financial well-being.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.592-599
• /
• 2018

The purpose of this study is to investigate consumer needs, image sensibility and preference of bedding fabric according to size and spacing of dot pattern. 18 kinds of dot pattern fabrics were designed with different diameters(6, 8, 10cm) and distances(4, 7, 10cm) in regular arrangement of diamond figure. The subjects were 162 male and female university students. The data were analyzed by SPSS 24.0. Fabrics were assessed subjectively using a 5-point scale 17 consumer needs and 33 sensory descriptors. The most consumer's needs for bedding fabric was shown to be functionality of bedding including hygiene, touch, warmth, ease of washing and management, air permeability, and hygroscopicity. The other parameters of consumer's needs were shown to be physical property and design parameter. The results of analysis of the dimension of image sensibility for fabrics with different size and spacing of dots are derived from six factors including joyfulness, coziness, uniqueness, charm, femininity, and complexity. As a result of analysis of preference with fabric kinds, there was a significant difference in preference with fabrics. The preferred fabrics were characterized by the pattern and the base fabric being striking three-dimensionally with 1/3 twill and 3/1 twill fabric. Sensory descriptors related to joyful image and unique image were analyzed as evaluation terms that can distinguish the preferences of fabrics. Correlation analysis showed the fabrics are preferred as the difference in luminance and reflectance between the base and pattern of the fabric become larger and the spacing of patterns become closer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.2
• /
• pp.190-202
• /
• 1995

The Optical Art is based on the principle of visual perception of the illusionary effects which induce psychological responses. It has influenced greatly on the Texile Design in that unique iJlusionary creativity of pattern simulates the visual sense of special movement; the dynamic psylosophy of vitalism. The Optical pattern has become a highly valued item due to its innovative effect in aesthetic direction. According to Vitor Vasarely the pioneer in this area, the integration and the inseparability of form and color which he calls 'Plastic Unity' provides the basis for the composition of infinite variety. The composition of infinite variety. The composition reveals the complex interaction between the space and form relating to order, repetition, combination and permutation. It is not simple to create optical patterns due to the extreme complexity composed by the multi-dimension and the infusion of form and color giving immensely varied movement. The purposes of this study are as follows; 1) to classify the complex processes of optical pattern on the basis of formative method. 2) to develop creative ideas for progressive contemporary textile design In this study, the analysis of applied methods is concentrated, which is based 1) on the gradual modification and on the transformation of the basic plastic elements which depend on thle direction of visual points involVing contradictory perspectives 2) on the composition varied special situations by repeating, overlapping and converging a series of idetUical units or by means of irrdiation, radiation and etc.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.87-100
• /
• 1988

The purpose of this study was to investigate the dweller's housing needs through the connection between dwellers' living pattern and space usage. The objectives were (1) to examine how to eat and cook in the eating and cooking spaces, (2) to examine how to alter the original housing, (3) to research the dwellers' housing needs for the eating and cooking spaces, and the changing process of dwellers' housing needs, and (4) to classify the type of eating and cooking spcaces. The results of this study were (1) there were changed in eating pattern of space usage according to the season. The eating activities were a Korean living pattern : sitting on the floor and eating at the BAB SANG. (2) There was a difference in the pattern of space usage and the activity for main cooking and KIM CHI. (3) AN BANG (eating space for winter) as well as MARU (eating space for summer) has changed to a larger space. (4) By the changing of living patterns, BU AUK (a main cooking space ) has showed a various alternations: function, dimension of space, facilities, floor materials and floor level. (5) The dwellers' housing needs for eating space were a multipurpose room, and a dining kitchen of western living pattern (using a dining table and chairs) with the present changing life styles. (6) The dwellers' housing needs for cooking space were a multipurpose room of working area, a seperation of heating area, a western living pattern, a plan of flat fllor level and a dining kitchen. (7) BU AUK of eating and cooking spaces was classified into 4 types: a traditional type, a mixing type, a modernized type, and a western type.