• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.118-122
• /
• 1995

Escherichia Coli ornithine transcarbamylase is the enzyme which catalyzes the L-citrulline biosynthesis from L-ornithine and carbamyl phosphate. To facilitate the purification of enzyme which will be used for many biochemical studies such as structure and function relationships and catalytic mechanisms, the cloning and expression of E. coli argI gene for ornithine transcarbamylase was conducted. argI was amplified from genomic DNA of E. coli strain of $DH5{\alpha}$, by polymerization chain reaction (PCR) method. The amplified argI gene was ligated to the prokaryotic expression vector pKK223-3 and used for transformation of E. coli TB2 which was deficient of ornithine transcarbamylase. The over-produced enzyme by the tnansformant was purified by ammonium sulfate fractionation, heat denaturation and affinity chromatography. The result of SDS denaturation gel electrophoresis for the purified enzyme showed a single band of about 38 kDa of ornithine transcarbamylase. Kinetic data for the expressed enzyme gave almost the s?????? values as those of the wild type enzyme. The $k_{cat}$, of the enzyme was $1.0{\times}10^5min^{-1}$, and $K_ms$ for ornithine and carbamyl phosphate were 0.35 mM and 0.06 mM, respectively.

• Journal of Veterinary Clinics
• /
• v.27 no.4
• /
• pp.453-456
• /
• 2010

A one-month-old, 0.9 kg BW, male Korean Sapsal dog with anorexia, anuria, ataxia and depression was referred. On physical examination, the dog was showed tachycardia, hypothermia and pale mucous membrane. Hematologic values showed leukocytosis and mild anemia. Serum chemistry profile results revealed increased BUN (57.3 mg/dl) and $NH_3$ ($584\;{\mu}g/dl$), decreased albumin, sodium and potassium. Urinalysis showed hematuria, proteinuria, glucosuria, bacteriuria (Staphylococcus spp.) and magnesium ammonium phosphate crystalluria. On radiographic finding, urinary bladder was enlarged and 2 mm diameter radiopaque urolith was showed between os penis and prescrotal region. Urolithiasis was surgically corrected by urethrostomy.

• Clean Technology
• /
• v.17 no.4
• /
• pp.325-328
• /
• 2011

Atom-efficient preparation of 9, 9'-bis[4-(2'-hydroxy-3'-acryloyloxypropoxy) phenyl]fluorene (3), the extensively used building block for fluorene-containing acrylic epoxy polymers has been described. The epoxide ring opening esterification of 9, 9-bis[4-(glycidyloxy)phenyl]fluorene (1) with acrylic acid was catalyzed by some onium salts such as quaternary ammonium and phosphonium salts. While the coupling reactions depend greatly on the kind of the onium salts, the reaction of 9, 9-bis[4-(glycidyloxy)phenyl]fluorene (1) with acrylic acid proceed most efficiently in the presence of a catalytic amount of tetrabutylphosphonium bromide at $110^{\circ}C$ with 90% yield. This reaction is a cleaner reaction that minimizes the use of reactants and the production of chemical wastes.

• Journal of the Korean Chemical Society
• /
• v.36 no.3
• /
• pp.393-404
• /
• 1992

The response properties of continuous automated system using an enzyme reactor for determination of urea were investigated. The enzyme reactor was constructed to packed-bed form which filled with nylon-6 beads (42∼48 mesh), which immobilized urease with glutaraldehyde, in teflon tube (2 mm I.D., 20 cm length). The system was composed of the enzyme reactor, gas dialyzer, and tublar PVC-nonactin membrane ammonium ion-selective electrode as an indicator electrode in serial order. The response characteristics of this system were as follows. That is, the concentration range of linear response, slope of linear response, detection limit, and conversion percentage were $5.5{\times}10^{-6}$∼$2.4{\times}10^{-3}M$, 57.8 mV/decade, $1.5{\times}10^{-6}$, and 80.8%, respectively. The optimum buffer and life time of urease reactor were 0.01M Tris-HCl buffer solution (pH 7.0∼7.8) and 0.01M phosphate buffer solution (pH 6.9∼7.5) and about 150 days, respectively. And the urease reactor had no interferences of the other physiological materials.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.30-36
• /
• 1983

Plywood, the representative interior decorative or structural material, is so inflammable that it may cause big fires. Therefore, it is required inevitably to manufacture the "Fire retardant treated plywood", and it will be a study on the redrying of treated plywood that we ought to solve. This study was carried out to investigate the absorption of 20% $(NH_4)_2HPO_4$ solution into the soaked plywoods by hot/cold soaking for 3/3, 6/3, 9/3 and 12/3 hours and to study drying process with drying curves and drying rates by press-drying at the platen temperature of 130, 145, 160 and $175^{\circ}C$. Solution absorption of plywoods in hot/cold soaking method increased steadily with the prolonged soaking time, and water absorption is higher than DAP absorption, and then chemical retention (DAP) exceeded the minimum retention [$1.125kg/(30cm)^3$] even in the shortest soaking treatment. Drying curves of water-soaked plywoods inclined more steeply than those of DAP soaked plywoods. And the drying proceeded rapidly with the increase in platen temperature and terminated in 2.5-4 minutes at the temperature of 160 and $170^{\circ}C$. Drying rate also increased generally with the increase of platen temperature. So it was at $175^{\circ}C$ in DAP-soaking and at $160^{\circ}C$ in water-soaking when the drying rate became above 10%/min.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.3-9
• /
• 1984

This study was carried out to examine the practicality of DAP[$(NH_4)_2HPO_4$] as fire retardant for plywood by static bending test the redried plywoods which had been soaked in 20% $(NH_4)_2HPO_4$ solution. Being hot/cold soaked in the solution for 3/3, 6/3, 9/3 and 12/3 hours and redried by cyclic press-drying method at the platen temp. of 130, 145, 100 and $175^{\circ}C$, the treated plywoods were tested to offer the mechanical data, that is, $S_{pl}$(stress at proportional limit), MOE(modulus of elasticity), MOR(modulus of rupture) and $W_{pl}$(work per unit volume to proportional limit ) in flexure. The results obtained were summarized as follows. 1. $S_{pl}$ of fire retardant treated plywoods ("FRP" would be used hereinafter) decreased as the platen temperature increased, but it was superior to that of non-treated plywoods(Control) at $160^{\circ}C$ or higher. 2. MOE of FRP decreased roughly with the increase of temperature, hut this tendency was not constant. And the value of FRP was higher than that of Control even at $175^{\circ}C$. 3. MOR of FRP showed same temperature-dependent tendency as MOE, but it was influenced more sensitively at the higher temperature. 4. $W_{pl}$ of FRP also decreased gradually with the increase of platen temperature and the value in DAP 9/3 treatment was Jess than 70% of control plywoods. 5. In view of redrying time and mechanical properties, the most reasonable platen temperature for DAP treated FRP was $160^{\circ}C$ in this study.

• Clean Technology
• /
• v.16 no.4
• /
• pp.239-244
• /
• 2010

The carboxylation of the fluorenyl epoxide with a spiro framework, 9,9'-Bis(4-oxiranylmethoxyphenyl) fluorine (2) was catalyzed by some onium salts such as quaternary ammonium and phosphonium salts to produce the corresponding five-membered cyclic carbonate (3) in an efficient and environmentally benign fashion. The coupling reactions depend greatly on the kind of the halide anions and alkyl chain length of the onium salts. While the reaction was sensitive to the reaction temperature, the reaction trends suggest that the catalytic efficiency of the quaternary ammonium halides may correlate strongly with the melting points of the halides. The reactions using a catalytic amount (2 mol %) of quaternary ammonium bromide with an n-butyl chain at 75.9 bar of $CO_2$ and 393 K give the highest yield of the cyclic carbonate (92%).

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.50-57
• /
• 2004

Selection of yeast strains, optimum conditions for alcohol fermentation, sterilization methods, and additives for improving wine quality were investigated to manufacture watermelon wine. Eight yeast strains exhibited significant alcohol fermentation, among which KWS 06 was selected for watermelon wine fermentation, because watermelon wine made by this strain showed the best overall acceptability in sensory evaluation. Sucrose was determined as the best saccharide for alcohol fermentation among sucrose, corn syrup, glucose, fructose, and lactose. Optimum concentration of soluble solid and $(NH_{4})_{2}HPO_{4}$ of nitrogen source were $24^{\circ}Brix and 0.2%, respectively. Addition of raspberries and omija increased wine flavor and alcohol production, respectively, with optimum alcohol production, taste, and color achieved with addition of 20 g/L raspberries and 10 g/L omija. Best sensory quality was obtained by addition of 0.04 % watermelon flavorant to the juice.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.85-92
• /
• 2016

The eight mixes and artificial soil aggregates were prepared for evaluating the practical application of lightweight foamed concrete as soil aggregates. The main parameter was unit binder content ranged between from 100 to $800kg/m^3$. In lightweight foamed concrete, flow, slurry and dried density, and compressive strength at different ages were measured. In Artificial soil aggregates crushed from lightweight foamed concrete, particle size distribution, pH, coefficient of permeability, cation exchange capacity(CEC), and ratio of carbon to nitrogen(ratio of C/N), were measured. The test results showed that flow, slurry and dried density, and compressive strength at different ages of lightweight foamed concrete increased with the increasing of unit binder content. Compressive strength at age of 28, of lightweight foamed concrete with unit binder of more than $500kg/m^3$, was more than 4 MPa. The ammonium phosphate immersion time of more than age of 3, was effective to decrease pH of artificial soil aggregates. In addition, artificial soil aggregates was evaluated as high class in terms of cation exchange capacity(CEC), while satisfied with value of ratio of carbon to nitrogen(ratio of C/N) recommended by landscape specification.

• Korean Journal of Ecology and Environment
• /
• v.48 no.4
• /
• pp.238-252
• /
• 2015

The effect of weir construction (2009~2011) was investigated on algal bloom dynamics and surrounding conditions in the Youngsan River by analyzing the long-term (2001~2014) data provided by the Water Information System, Ministry of Environment. The data include chlorophyll a and water properties such as total suspended solids (TSS), ammonium ($NH_4{^+}$), nitrate ($NO_3{^-}$), orthophosphate ($PO{_4}^{3-}$), total nitrogen (TN), total phosphorus (TP) and DIN/DIP molar ratio collected from 12 stations along the channel of the river. Temporal variations were examined using data collected monthly from 2001~2014 and Box-Whisker plot was used to examine the difference in algal bloom dynamics between before (2006~2008) and after (2012~2014) the weir construction. Pearson's correlation analysis was also used to analyze the correlation of parameters. The results showed that TSS affecting water turbidity increased during the construction but decreased especially at the stations located in the upper and middle regions of the river after the construction. Ammonium concentrations increased whereas the concentrations of other nutrients decreased after the construction inducing an increase in N:P molar ratio. Chlorophyll a decreased suddenly during the construction but increased clearly after the construction at the stations where TSS decreased. This indicates that algal blooms can develop in the Youngsan River due to a decrease in turbidity that increases light penetration in water column although the concentrations of nutrients such as orthophosphate were reduced after the weir construction.