• Korean Journal of Bronchoesophagology
• /
• v.2 no.1
• /
• pp.63-70
• /
• 1996

Reconstruction for hypopharynx and cervical esophagus after wide resection of extensive hypopharynx and larynx cancers have been used various methods including myocutaneous flaps, gastric pull up, md jejunal or large bowel free graft. Recently, the authors had experienced hypopharynx and larynx cancers with extension to the posterior hypopharyngeal wall and thoracic esophagus. Of course, these reconstructive methods should be selected in accordance with the patient's age, physical status, extend of prim.:W lesion, and defect after on block resection, however, gastric pull up was performed in hypopharynx cancer which had skipped lesion in the thoracic esophagus and jejunal free grafts were performed in case 2, 3 which had a extended lesions to the posterior pharyngeal wall. Some complications were noted, which were successfully stabilized by conservative managements. The gastric pull up and jejunal free graft were considered suitable methods for reconstrunction of hypopharynx and cervical esophagus, however, further studies are necessary about it.

• Journal of Korea Foundry Society
• /
• v.28 no.4
• /
• pp.190-194
• /
• 2008

Thin-walled die casting of aluminum notebook computer housing with less than 1mm thickness was investigated by using computational solidification simulation and actual casting experiment. Three different types of gate design, finger, tangential and split type, were used and the results showed that sound thin-walled die casting was possible with tangential and split type gating design because those gates allowed aluminum melt flowed into the thin-wall cavity uniformly and split type gating system was preferable gating design than tangential type at the point of view of soundness of casting and distortion generated after solidification. Also, solidification simulation agreed well with the actual die-casting and the casting showed no casting defect and distortion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.226-227
• /
• 2015

This research is to measure and analyze the thermal performance of the apartment structure and to evaluate and establish standards of thermal insulation defect in order to make the basic data necessary for determining the degree of the thermal performance degradation and for repairing and reinforcing the exterior wall of the existing apartment. The following conclusions could be derived thorough the investigation of outer wall temperature distribution and the insulation assesment experiments using a model of specimens for the apartment houses' outer walls. It was confirmed that for the thermal performance through the insulating material thicknesses 5cm, 8cm in walls, the thermal insulation thickened by 3cm, from 5cm to 8cm, but that the actual temperature difference reached only about 1 ~ 2℃. This implies that the thermal performance improvement using the thermal insulation in walls is not significant and that it is difficult to insulate the thermal bridge area.

• Archives of Plastic Surgery
• /
• v.38 no.1
• /
• pp.113-116
• /
• 2011

Purpose: Many fingertip injuries are associated with nail injury and it is hard to repair to original shape due to its unique characteristic. Mucosal graft is used for a defect of the nail bed injury. Hereby, we introduce a DAP flap and buccal mucosal graft, with which we could reduce the defect size of the injured fingertip and donor site morbidity at the same time, without any need for harvesting additional skin from other part of hand. Also, mucosal graft makes good cosmetic and functional outcome of nail. Methods: This method was performed in a 56-year-old man with fingertip injury on dorsal side of left thumb due to electrical saw. First, DAP flap was performed on the injured finger to reduce the size of the defect of fingertip and cover the bone exposure. Second, nail bed part of the DAP flap was de-epithelized and buccal mucosal graft was done from left side of intraoral cavity wall. Results: Flap and graft survived without any necrosis but some nail bed could not be covered with flap due to insufficient flap size. All wounds healed well and did not present any severe adversary symptoms. Conclusion: DAP flap with mucosal graft is an effective method that we can easily apply in reconstruction of fingertip injury. We suggest that the combination of the two procedures makes good functional and cosmetic outcome compared to the usual manner, especially in cases of nail bed injury without distal phalanx bone defect.

• Journal of Periodontal and Implant Science
• /
• v.28 no.1
• /
• pp.145-160
• /
• 1998

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue which has been lost due to destructive periodontal disease, and numerous kinds of materials and techniques have been developed to achieve this goal. Bone grafts include autografts, allografts, xenografts and synthetic grafts. Among the synthetic grafts, bioactive glass has been used in dentistry for more than ten years and Fetner reported improved new bone formation and more amount of new attachment after grafting PerioGlas, a kind of bioactive glass, in 2-wall defects of monkeys in 1994. It Is well known that 1-wall defects have less osteogenic potential and more epithelial migration, so we need to study the erect of bioactive glass in 1-wall dejects in dogs. The present study evaluates the effect of bioactive glass on the epithelial migration, alveolar bone regeneration, cementum formation and gingival connective tissue attachment in intrabony detects of dogs. Four millimeter deep and four millimeter wide 1-wall defects were surgically cheated in the mesial aspects of premolars. The test group received bioactive glass with a flap procedure and the control underwent flap procedure only. Histologic analysis after 8 weeks of healing revealed the following results: 1. The height of gingival margin was 1.30{\pm}0.73mm$ above CEJ in the control and $1.40{\pm}0.78mm$ in the test group. There was no statistically significant difference between the two group. 2. The length of epithelial growth (the distance from CEJ to the apical end of JE) was $1.74{\pm}0.47mm$ in the control and $1.12{\pm}0.36mm$ in the test group. These was a statistically significant difference between the two groups (P<0.01). 3. The length of new cementum was $2.06{\pm}0.73mm$ in the control and $2.62{\pm}0.37mm$ in the test group. There was no statistically significant difference between the two groups. 4. The length of new bone was $1.83{\pm}0.74mm$ in the control and $2.39{\pm}0.59mm$ in the test group. There was no statistically significant difference between the two groups. These results suggest that the use of bioactive glass 1-wall intrabony defects has significant effect on the prevention of junctional epithelium migration, but doesn't have any significant effect on new bone and new cementum formation.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.32 no.1
• /
• pp.39-42
• /
• 2021

Granuloma is an uncommon benign disease that develops in the process of wound healing. Pharyngeal or laryngeal granuloma can be associated with gastric reflux, mechanical injury or trauma including intubation, voice abuse, or foreign body. 50-year-old female was transferred to our institute with a huge mass occupying the upper aerodigestive tract causing dysphagia. The patient has been suffering from a brain hemorrhage for several months and was kept in bed due to the quadriplegia with stuporous mental status, and was tracheotomized. On examination, the whole oropharynx and hypopharynx was covered by a smooth-surfaced soft big diffuse granular mass, which extended down to the upper trachea through the larynx. The huge granuloma was successfully removed with surgery and was found to have a pedunculating stalk on the oropharyngeal posterior wall with a small mucosal defect, suggestive of the origin of the mass. The defect was closed primarily after the cauterization. The patient is now followed up regularly without any recurrence of the disease.

• Journal of Veterinary Clinics
• /
• v.26 no.5
• /
• pp.467-471
• /
• 2009

This report describes Neural Tube Defects (NTDs) with Abdominal Wall Defects (AWDs) on the sibling of Yorkshire terriers. The NTDs and AWDs are rare serious congenital defects. The NTDs are neurulation abnormality that results from to failed transformation of the neurual tube by the incomplete closure of the embryonic neural plate. These dysraphic states range form mild to severe according to developmental malformation that include fusion defects of skull (crania bifida; CB) and fusion defects of vertebrae (spina bifida; SB). The AWDs are genetic defects that results from to failed formation of abdominal wall and cavity. These dysraphic states are omphalocele and gastroschisis. The 12-month dam was delivered by caesarian section and 4 littermate had obvious malformations. One male dead stillbirth fetus (L1) was revealed the extruded abdominal viscera, omphalocele. One female fetus (L2) was died within 1 hour after birth with defects of abdominal muscle upper umbilicus, gastroschisis. 3rd fetus (L3) was died within 36 hours after parturition and revealed a copious dermal and vertebral defects on the midline thorax, upper SB asperta. 4th fetus (L4) is still growing well now at 6 months but at the 2 week age, appears hairy nevus on the frontal cranium and dorsal thoracic portion. The radiograph of L1 and L2 are shown decrease bony density of calvarium and L3 was shown defect of spinose processes of the T9-T13. On our knowledge, this is first report of the SB and CB in Yorkshire terrier. And also sibling of NTDs with AWDs that has not previously been reported in the dog.

• Korean Journal of Radiology
• /
• v.21 no.9
• /
• pp.1104-1113
• /
• 2020

Objective: To assess the regional ventilation in patients with asthma-chronic obstructive pulmonary disease (COPD) overlap syndrome (ACOS) using xenon-ventilation dual-energy CT (DECT), and to compare it to that in patients with COPD. Materials and Methods: Twenty-one patients with ACOS and 46 patients with COPD underwent xenon-ventilation DECT. The ventilation abnormalities were visually determined to be 1) peripheral wedge/diffuse defect, 2) diffuse heterogeneous defect, 3) lobar/segmental/subsegmental defect, and 4) no defect on xenon-ventilation maps. Emphysema index (EI), airway wall thickness (Pi10), and mean ventilation values in the whole lung, peripheral lung, and central lung areas were quantified and compared between the two groups using the Student's t test. Results: Most patients with ACOS showed the peripheral wedge/diffuse defect (n = 14, 66.7%), whereas patients with COPD commonly showed the diffuse heterogeneous defect and lobar/segmental/subsegmental defect (n = 21, 45.7% and n = 20, 43.5%, respectively). The prevalence of ventilation defect patterns showed significant intergroup differences (p < 0.001). The quantified ventilation values in the peripheral lung areas were significantly lower in patients with ACOS than in patients with COPD (p = 0.045). The quantified Pi10 was significantly higher in patients with ACOS than in patients with COPD (p = 0.041); however, EI was not significantly different between the two groups. Conclusion: The ventilation abnormalities on the visual and quantitative assessments of xenon-ventilation DECT differed between patients with ACOS and patients with COPD. Xenon-ventilation DECT may demonstrate the different physiologic changes of pulmonary ventilation in patients with ACOS and COPD.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.53-66
• /
• 2023

In this study, the results of the elasto-plastic beam analysis, finite element analysis and optimization design of the steel pipe sheet pile applied as an earth retaining wall under the deep excavation were presented. Through this study, it was found that the high-strength and sea resistant steel pipe has high allowable stress, excellent structural properties, favorable corrosion, and high utilization as an earth retaining wall, and the C-Y type joint has significantly improved the tensile strength and stiffness compared to the traditional P-P type. In addition, it was investigated that even if the leak or defect of the wall occurs during construction, it has the advantage of being able to be repaired reliably through welding and overlapping. In the case of steel pipe wall, they were evaluated as the best in views of the deep excavation due to the large allowable bending stress and deformation flexibility for the same horizontal displacement than CIP or slurry wall. Elasto-plastic and finite element analysis were conducted in consideration of ground excavation under large-scale earth pressure (uneven pressure), and the results were compared with each other. Quantitative maximum value were found to be similar between the two methods for each item, such as excavation behavior, wall displacement, or member force, and both analysis method were found to be applicable in design for steel pipe sheet pile wall. Finally, it was found that economical design was possible when determining the thinnest filling method with concrete rather than the thickest hollow shape in the same diameter, and the depth (the embedded length through normality evaluation) without rapidly change in displacement and member force.

• Corrosion Science and Technology
• /
• v.3 no.1
• /
• pp.30-33
• /
• 2004

It has been reported that some events of a rupture of seam generator tube have occurred in nuclear power plants around the world. Main causes of the leakage are from various types of corrosion in the steam generator(SG) tubings. Primary water stress corrosion cracking(PWSCC) of steam generator tubings have occurred in many tubes in Korean plant, and they were repaired using sleeves or plugs, In order to develop proper repair criteria, it is necessary to ascertain the leak behavior of the tubings. A high pressure leak and burst testing system was manufactured. Various types of Electro Discharged Machined (EDM) notches were developed on the SG tubes. Leak rate and burst pressure were measured on the tubes at room temperature. Burst pressure of the part through wall defected tubes depends on the defect depth, Water flow rates after the burst were independent of the t1aw types; tubes having 20 to 60 mm long EDM notches showed similar flow rates regardless of the defect depth. A fast pressurization rate gave the tube a lower burst pressure than the case of a slow pressurization.