• 한국안전학회지
• /
• 제28권6호
• /
• pp.11-16
• /
• 2013

This paper presents a study on the analyzing reliability of smoke fire detector using accelerated life test. In general, the smoke fire detector is broken by dust which flow in smoke detection chamber. In order to conduct accelerated life test of smoke fire detector dust is set accelerated factor in this paper. The dust is fly-ash which is test particle 5th regulated by KS A 0090. The dust accelerated level is 60 g, 180 g and 360 g and failure time is measured by smoke sensitivity testing. It is considered to failure of detector if detector don't operate within 30 secconds when subjected to an air stream having a velocity of 20 cm/s~40 cm/s containing smoke with a concentration of 15% of rate of light-response of 1 m. The goodness of fit test and mean life prediction conduct using the failure time. The result show that life distribution fits the weibull distribution for failure time data and the mean lifes calculate 22.5 year in domestic product and 14.7 years in overseas product applied dust stress only.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권1호
• /
• pp.31-43
• /
• 2007

The function of O-ring seals is to prevent leakage during the service life of the components in which they are installed. The life prediction of O-ring is very important at various industry fields. Generally, to evaluated the long-term performance of O-ring in severe environments has applied a life prediction technique based on accelerated life test (ALT). In this work, Accelerated thermal aging test(l20, 130, 140, $150^{\circ}C$) of O-ring was applied for life prediction of O-ring. The property changes after thermal aging test was measured using TGA, DSC, FT - IR, Video Microscope and SEM. Shape parameter and life prediction were obtained using MINITAB program.

• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.188-193
• /
• 2007

Magnetic contactors (MCs) are widely used in industrial equipment such as elevators, cranes and factory control rooms in order to close and open the control circuits. The reliability of MCs mainly depend on mechanical durability and international standards such as IEC 60947-4-1, which stipulates the testing method for MCs. Testing time, however, is so long in usual cases that a method of reducing testing time is required. Therefore, a temperature and voltage-accelerated life testing (ALT) method has been developed to reduce the testing time in this work. The accelerated life test data are analyzed and acceleration factors (AFs) are provided.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.89-98
• /
• 2010

In this paper, a two-stage group sampling plan based on the time truncated life test is proposed for the Weibull distribution. The design parameters such as the number of groups and the acceptance number in each stage are determined by satisfying the producer's and consumer's risks simultaneously when the group size and the test duration are specified. The acceptable reliability level is expressed by the ratio of the true mean life to the specified life. It was demonstrated from the comparison with single-stage group sampling plans that the proposed plan can reduce the average sample number or improve the operating characteristics.

• 한국가족관계학회지
• /
• 제21권2호
• /
• pp.77-96
• /
• 2016

Objectives: The aims of this study are to examine the associations between marital satisfaction and life satisfaction among Korean retirees in later life and to test whether the degrees of associations increased over time. Method: Nationally representative Korean Longitudinal Study of Ageing data from wave 1 (in 2006) to wave 4 (in 2012) was utilized and retirees in later life (65-89 years old, N=402) were analyzed. Latent growth modeling (LGM) and model constraint were applied using Mplus 7.3. Age, sex, household income, subjective health, depressive symptoms and elapsed time after retirement were included as control variables. Results: Linear unconditional LGM fitted the data well and showed gradual decrease in life satisfaction. Conditional LGM revealed significant associations between marital satisfaction and life satisfaction from time 1 to time 4. According to model constraint test, the size of associations between marital satisfaction and life satisfaction did not change with time. Conclusions: To sum up these results, the associations between marital satisfaction and life satisfaction were significant and relatively stable over time among retirees in later life. This study suggests one's spouse is a fundamental component of social convoy among Korean retirees in later life. Therefore, intervention programs targeted toward enhancing marital relationships among retirees' couples will help them to live a better life.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.59-70
• /
• 2014

The requirements of reliability verification for new products and technology are increasing more and more in accordance with the trend of climate change prevention and GHG reduction technology, functional skills. SCA(Swirl Control Actuator) is the important part of a car intake manifold system. This device generates swirl that is mixing the fuel and air into the engine combustion chamber. This is to improve output for engine and reduce the emission for exhaust. In this article reliability assessment criteria for swirl control actuator for automobiles are established in terms of basic HALT and life time test.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.237-241
• /
• 2017

The tensile strength (TS) and elongation-at-break (EB) loss of a CR/CB rubber composite sample prepared for the automotive parts were measured after accelerated thermal ageing at temperatures of 100, 120, 140, and $150^{\circ}C$. The change in TS was observed to be linear from the master curve prepared using the time-temperature superposition-principle (TTSP). An Arrhenius type of shift factor, $a_T$ was used to predict the life time of the sample, and a plot of ln $a_T$ vs. 1/T was also shown to be linear. The activation energy ($E_a$) of the sample was calculated as 70.30 kJ/mole from the Arrhenius plot. The expected life time of the sample was predicted at the given operating conditions by applying Arrhenius analysis. Assuming the $E_a$ value was constant at lower operating condition, life time of the sample was calculated as 2.3 years when the life limit was set as time to reach the 20% decrease of the initial TS value at operating temperature of $40^{\circ}C$.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• Reproductive and Developmental Biology
• /
• 제30권1호
• /
• pp.71-74
• /
• 2006

Hypoosmotic swelling test (HOST) is used for evaluating the plasma membrane function and fertilizing ability in mammal spermatozoa. However, HOS solutions and experimental conditions have not been determined clearly for assessing canine spermatozoa. This study was conducted to examine the HOS solutions and assay conditions, including incubation time (30 to 120 min), storage temperature (4, 17 and $20^{\circ}C$), semen status (fresh and frozen). Maximum spermatozoal plasma membrane swelling was obtained in an 150 mOsm Na-citrate/Fructose solutions with an incubation time for 45 min. The storage temperature and semen status affected the percentage of HOS positive spermatozoa. The HOS test adapted to canine spermatozoa in this study was simple and highly consistent assay with good repeatability. The optimal condition of HOST in canine spermatozoa is an 150 mOsm Na-citrate/Fructose solutions with an incubation time for 45 min regardless of semen storage temperature and semen status.

• 한국추진공학회지
• /
• 제18권3호
• /
• pp.17-25
• /
• 2014

본 논문은 장약포의 저장기간에 따른 파단하중 저하에 관하여 감마과정 모델을 이용하여 저장수명을 예측하는 방법에 대한 연구결과이다. 추진제의 자연분해로 발생하는 질소화합물과 장약포의 화학반응은 파단하중을 저하시킨다. 장약포의 가속수명시험 결과에 감마과정 모델을 적용하여 시간의 경과에 따른 상태와 수명을 확률분포로 표현하였다. 저장수명은 중위수로 표현하고 품질보증을 위한 정책결정기준으로 $B_1$ 또는 $B_5$ 수명을 활용하는 것이 적절하다.