• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.66-71
• /
• 2001

Kinetic parameters for the texture degradation of three varieties of sweet potato during heating were determined using two alternative methods, the biphasic model and the fractional conversion method. The texture degradation of sweet potatoes during heating could be expressed by two simultaneous first order reactions using the biphasic method, whose activation energies were ranged $71.0{\sim}75.1\;kJ/mol\;and\;48.4{\sim}59.6\;kJ/mol$ for the initial fast texture degradation reaction and the slow texture degradation reaction at a prolonged heating period, respectively. However, the whole texture degradation phenomena of sweet potatoes during heating could also be explained by a single first order reaction using the fractional conversion method. The activation energies were $67.5{\sim}75.3\;kJ/mol$, which were comparable with those of the first phase reaction for the texture degradation determined by the biphasic model. A kinetic compensation effect shown between the kinetic parameters determined by both methods indicates that both methods can be conveniently used to determine kinetic parameters for the texture degradation of sweet potatoes by heating.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.483-490
• /
• 2014

The design procedures for a biological reactor and a secondary settling tank (SST) of an activated sludge system are based on the steady state design method (Ekama et al., 1986; WRC, 1984) and the 1-D flux theory design method (Ekama et al., 1997), respectively. This study combined both of the design procedures, to determine the optimum sludge concentration in the reactor and the best design with the lowest cost. The best design of the reactor volume and the SST diameter at the optimum sludge concentration were specified with varying wastewater and sludge characteristics, temperature, sludge retention time (SRT) and peak flow rate. The effects of the influent wastewater characteristics, such as substrate concentration and unbiodegradable particulate fraction, were found to be considerable, but the effect of unbiodegradable soluble fraction was to be negligible. The effects of sludge settling characteristics, were also significant. SRT, as an operating parameter, was found to be an important factor for determining the optimum sludge concentration. However, the effect of temperature was found to be small. Furthermore, for designing a large scale wastewater treatment plant, the number of reactors or SSTs could be estimated, by dividing the total reactor volume or SST area. The new combined design procedure, proposed in this research, will be able to allow engineers to provide the best design of an activated sludge system with the lowest cost.

• The Korean Journal of Zoology
• /
• v.38 no.1
• /
• pp.1-9
• /
• 1995

연두·금파리에서 혈구 세포가 면역반응의 일환으로 일으키는 결절형성(nodule formation) 현상을 형태학적으로 관찰하고자 본 실험이 수행되었다. 연두금파리 종령 유충 체내에 정상 효모, 고정된 대모, 세포액이 제거된 원형질체의 효모를 각각 주입하여 면역반응 과정을 전자현미경으로 관찰하였다 먼저 정상 효모를 주입하였을 경우, 효모와 접촉한 헐구의 과립방출과 곧 이은 혈구의 파괴 그리고 효모 주위에 혈림프와 함께 점액성응혈(clot)의 형성을 관찰 할 수 있었다 점액성 응혈에는 여러 유형의 파괴된 혈구가 포함되어 있었다. 이같은 면역반응에는 체내 혈구 중 과립혈구(granulocyte)가 가장 활발히 반응였고 응혈의 대부분을 형성하였다. 결절의 중심부인 응혈은 대모와 파괴되지 않은 혈구 대 파괴된 혈구 그리고 방출된 과립들로 차 있었고, 효모 주입 3시간 까지는 이같은 응혈은 계속 확대되었다. 그러나 10시간 이후에는 응혈이 관찰되지 않았으며 이때 체강내에서 효모가 관찰되곤 하였다. 고정된 효모를 주입하였을 경우에는 혈구파괴나 과립방출 등이 관찰되지 않았으며, 고정된 효모에 대한 혈구의 식 세포작용만이 관찰되었다. 이 식세포작용은 주입후 10시간 까지 계속되었다. 원형질 체의 효모를 주입하였을 경우에는 혈구에의한 면역반응이 관찰되지 않았다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.131-137
• /
• 2007

In this study, the biodegradation test on lignocellulose under sulfate reducing conditions was carried out. In particular, the interaction between cellulose and lignin was investigated with various g-cellulose/g-lignin (C/L) ratios: 42.15, 4.59, 2.51, 1.14 and 0.7. It was shown that the rate of cellulose degradation decreased in proportion to the lignin content. Assuming first order degradation kinetics, the consequences of competitive inhibition were graphically shown for different C/L ratios. The relation between cellulose reduction rate and C/L ratio was expressed by logarithm function with a determination coefficient of 0.97. Lignocellulose reduction rate was also described as a logarithm function of C/L ratio showing a inhibition effect by lignin. In the mean time, the rate of lignin decomposition was higher at C/L ratio of 2.51 and 1.14 compared with C/L ratios of 4.59 and 0.7, indicating that excessive extra carbon source is not appropriate for lignin biodegradation.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.174-179
• /
• 1992

Reaction of aniline and iodine in$CHCl_3,\;CH_2Cl_2 : CHCl_3$(1 : 1), and $CH_2Cl_2$ has been studied kinetically by using conductivity method, Pseudo first-order rate constants ($k_{obs}$) and second-order rate constants ($k_{obs}$/[aniline]) are dependent on the aniline concentration. Second-order rate constants obtained were increased with increasing aniline concentration. We analysed these results on the basis of formation of charge transfer complex as reaction intermediate. From the construction of react ion scheme and derivation of rate equation, we calculated equilibrium constants and activation parameters for the formation and transformation of charge transfer complex. The equilibrium constants were decreased by an increase in the dielectric constant of the solvent and the value is 1.7-3.7$M^{-1}$. The rate of transformation are markedly affected by the solvent polarity. ${\Delta}H^{\neq}$ is about 14.2kJ/mol, and ${\Delta}S^{\neq}$ is large negative value of -243J/mol K.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.175-184
• /
• 1989

Kinetics of ascorbic acid and browning that may use on the optimization of food dehydration were evaluated. Banana was chosen for this as the representative test material. We have described the destruction of ascorbic acid and browning as first and zero order reactions. The temperature dependence between two reactions were conducted with Arrhenius equation. Finally we have operated SPSS computer programs reapeatedly that we found very dose value of the parameter between result of ascorbic acid and browning. The attained Kinetic models were well prepared for the value of result experiments and the models may use on optimization for dehydration progress. Destruction rate of ascorbic acid and browning rate were low at initiation of progress, increased to show maximum at the low moisture on mid-progress and then decreased gradually. Freeze drying showed the most constant quality of product in this case.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.19-28
• /
• 1990

The rate of chlorine-exchange reaction of antimony trichloride with benzyl, $\alpha$-phenyl ethyl and diphenyl methyl chlorides in nitrobenzene have been determined. The results indicate that the chlorine-exchange reaction follows second-order kinetics with respect to antimony trichloride and first-order kinetics with respect to organic chlorides. Rate = $k_3[SbCl_3]^2$ [Org-Cl] The rate constants of chlorine-exchange of antimony trichloride with organic chloride increase in the following order of the organic chlorides. Benzyl chloride < $\alpha$-phenyl ethyl chloride < diphenyl methyl chloride The mechanism of the chlorine-exchange reactions has been proposed.

• Applied Chemistry for Engineering
• /
• v.2 no.1
• /
• pp.64-69
• /
• 1991

A lipid containing a 1, 2-dithiolane group was synthesized, and polymerized vesicle was prepared from the vesicle of this lipid by ring-opening polymerization. Reaction rate of the polymerization was monitored by UV absorption, and the results showed that it followed the first order kinetics and the rate constant $3.84{\times}10^{-2}min^{-1}$. Permeation rate of sucrose through the polymerized vesicle was $4.7{\times}10^{-8}cm\;hr^{-1}$, which is 1.5 times lower than that of monomeric analog.

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.29-37
• /
• 2013

In order to apply the silver cementation method using Fe powder from pregnant thiourea leaching solution. Parameters such as the amount of Fe powder addition, agitation speed, and temperature were investigated. The silver cementation rate was increased by the increasing of Fe powder addition, agitation speed, and temperature. The highest silver cementation rate was found when the addition of Fe powder was 50 g/L at the agitation speed of 500 rpm. The silver cementation rate increase with increasing temperature according to the Arrhenius equation and obeys $1^{st}$ order kinetics. The activation energy from the kinetics data was found to be between 13.73 KJ/mol and 17.02 KJ/mol. In the XRD analysis, goethite was detected in the precipitate of the thiourea leach solution. This indicates that an oxidation-reduction reaction had occurred in the thiourea solution due to the addition of the Fe powder.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.32-39
• /
• 2000

To investigate the adsorption-desorption reaction of Cd by sewage sludge, the adsorption of Cd from $Cd(NO_3)_2$ solutions of concentrations ranging from 5 to $50{\mu}g\;Cd\;mL^{-1}$ by sewage sludge was examined for reaction periods up to 48 hours. The amount of Cd adsorbed as a function of time was measured. The adsorption between Cd in solution and the solid phase could be described by two stages. The initial adsorption of Cd was very rapid, that is, approximately 95% of the added Cd was removed from solution within the first 30 minutes. Further, the greater the concentration of Cd added, the greater was the amount of Cd adsorbed. After the rapid initial decrease of Cd, a slower decline in the Cd concentration resulted which followed first order reversible kinetics. The equilibrium concentrations for the reactions, as well as the time period for the equilibrium reactions were dependent on the initial Cd concentrations. If equilibrium is reached, the amount of Cd remaining in solution is greater when the amount adsorbed is higher, although the percentage of Cd in solution is constant relative to the initial concentration of Cd. Some of the adsorbed Cd was released back to solution since the concentration of Cd after 48 hours was higher than the equilibrium concentration of Cd. However, despite the increased amount of Cd measured, the overall net reaction was a significant adsorption of Cd from solution by sewage sludge.