• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.4
• /
• pp.21-32
• /
• 2004

A Seismic analysis procedure of bi-directional brideg motions is developed by using mechanical bridge model. A three-dimensional mechanical model can consider major phenomena under bi-directional seismic excitations, such as nonlinear pier motion under biaxial bending, pounding and bearing damage due to the rotaion of the superstructure, etc. The analyses utilizing the uni-directional and the bi-directional bridge model for the 3-span simply supported bridge are then performed. The seismic responses in two cases are examined and compared by investigating the relative displacements of each superstructure to both ground and adjacent superstructures and the restoring forces of RC pier. The analysis using either the uni-directional model or bi-directional model is acceptable for estimating the displacement responses of a bridge, but the bi-directional analysis is found to give more conservative results for resisting forces of RC piers. To make general conclusions, therefore, the analysis using the bi-directional bridge model should be performed in evaluating the seismic safety of bridges.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.903-908
• /
• 1998

KALIMER 원자로 건물에 대하여 3차원 쉘요소 모델과 단순 빔모델을 작성하고 고유진동수 해석을 수행하였다. 두 모델의 1차 수평방향 고유진동수는 대체로 일치하였다. 단순 빔모델에 대해 원자로건물의 회전 관성모멘트를 해석에 반영한 경우 3차원 모델에는 없는 회전모드가 발생되었다. 지진응답해석은 1940 EL Centro와 인공지진에 대하여 수행하였으며, 두 결과는 면진구조물의 경우 비면진구조물과 비교하여 응답가속도가 크게 줄고, 상대변위가 증가하는 경향을 보였다.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.1
• /
• pp.87-94
• /
• 2009

This paper presents dynamic behavior of double-layer barrelvault systems subjected to earthquake loadings. In order to investigate different seismic behaviors according to Time History Analysis (THA), six open angles were employed and different fundamental frequencies corresponding to each open angle were considered. A total of 24 double-layer structures were developed by using Midas Gen., which is a computer analysis program and then THA with three different earthquakes with 5% damping ratio was performed. This study investigated the characteristics of the dynamic response for X-, Y- and Z- directions, both subjected to the horizontal earthquake (H) and applied to the vertical earthquake (V) with respect to the each variable, which assumed to be important aspects for spatial structure. In order to examine the dynamic characteristics, the ratio of acceleration in specific nodes of barrelvaults was evaluated at the time with maximum response. The main purpose of this study is to obtain equations of the equivalent earthquake loading with respect to the barrelvault systems.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.116-123
• /
• 2000

본 논문은 1995년 일본 남부 효고켄 남부 지진 (코베 대지진)에 의해 코베시에 위치하는 인공섬인 포트 아일랜등서 발생한 액상화 현상을 해석적 기법을 동원하여 액상화 현상의 저감 효과 혹은 방지를 위하여 실시되어져 오고 있는 여러 공법들의 타당성을 수치해석적인 입장에서 검증한 것이다. 따라서, 본 논문에서는 코베시에 의해 획득되어진 연직 방향의 지진 기록에 의해 포트 아일랜드 시공 당시 구역별로 다른 지반 개량 공법을 실시했고, 혹은 실시하지 않는 구역에 대해서 1차원 및 2차원 전응력 그리고 유효 응력 해석 기법을 동원하여 일련의 해석을 실시하였고 그 결과를 다각적인 방향에서 제시하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.3 s.43
• /
• pp.51-58
• /
• 2005

Many RC building structures of multiple uses constructed in Korea have the Irregularities of torsion and soft story at bottom stories simultaneously. Seismic design codes generally require dynamic analysis and to take into account the effect or earthquake excitations in the orthogonal direction using the approximate methods of 100/30 and SRSS for type of building structures. And ail buildings should be designed to be safe in any direction of earthquake input. But, most of designers have difficulty in considering the orthogonal and directional effect of earthquake. The objective of the study stated herein is to verily 1) the effect of the choice of the reference axes on the seismic design member forces by comparing the analytical results on member forces using the principal axes suggested by Wilson and the global axes generally adopted in design office, 2) the validity or the 100/30 and SRSS methods by comparing the member forces obtained through linear elastic time history analysis with those obtained through using response spectrum analysis and 100/30 (or SRSS) methods. Based on the observations on the analytical results, it is concluded as follows; 1) The values of member forces by principal axes can be about $15\%$ smaller than those by the global axes in the example structure. 2) Though the values of member forces given by time history analysis are generally within the peak values predicted by 100/30 and SRSS methods, many member force vectors $(P,\;M_y,\;and\;M_z)$ by lime history analysis were located outside the boundaries predicted by the approximate method such as the 100/30 method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.3
• /
• pp.1-8
• /
• 2001

Seismic design forces for bridge components may be determined by modifying elastic member forces of design earthquakes using appropriate response modification factors according to the national design code of bridges Modeling technique of pile foundation system is one of the important parameters which greatly affects the results in the process of the elastic seismic analysis of a bridge system with pile foundation. In this paper, a approximate and simplified modeling technique of a pile foundation system for the practical purposes is presented. The modeling technique is based on the stiffnesses of pile foundation during earthquake. The horizontal stiffnesses are determined from the resistance-deflection curves derived from the results of dynamic field tests using cyclic loads and the vertical stiffness includes the effects of the end bearing capacities and side friction of piles as well as the pile compliances under the expected vertical load level. The applicability of the proposed technique has been validated through the some example bridge analyses.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.1
• /
• pp.1-10
• /
• 2011

Recently, there has been an increased interest in the noise isolation capacity of floor slabs, and thus an increase of slab thickness is required. In addition, long span floor systems are frequently used for efficient space use of building structures. In order to satisfy these requirements, a biaxial hollow slab system has been developed. To verify the structural capacity of a biaxial hollow slab system, safety verification against earthquake loads is essential. Therefore, the seismic behavior of a biaxial hollow slab system has been investigated using material nonlinear time history analyses. For efficient time history analyses, the equivalent plate element model previously proposed was used and the seismic capacity of the example structure having a biaxial hollow slab system has been evaluated using the nonlinear finite element model developed by the equivalent frame method. Based on analytical results, it has been shown that the seismic capacity of a biaxial hollow slab system is not worse than that of a flat plate slab system with the same thickness.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2003

Recently, many high-rise reinforced concrete(RC) bearing-wall structures of multiple uses have been constructed, which have the irregularities of weak(or soft) story and torsion at the lower stories simultaneously. The study stated herein was performed to investigate seismic performance of such a high-rise RC structure through a series of shaking table tests of a 1: 12 model. Based on the observations of the test results, the conclusions are drawn as follows: 1) Accidental torsion due to the uncertainty on the properties of structure can be reasonably predicted by using the dynamic analysis than by using lateral force procedure. 2) The mode coupled by translation and torsion induced the overturning moments not only in the direction of excitations but also in the perpendicular direction: The axial forces in columns due to this transverse overturning moment cannot be adequately predicted using the existing mode analysis technique, and 3) the hysteretic curve and the strength diagram between base shear and torque(BST) clearly reveal the predominant mode of vibrations and the failure mode.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.137-146
• /
• 2018

On September 12, 2016, the Gyeongju District was strongly shaken with M=5.8, which was the largest one since measured by the actual seismometer in Korea, and some buildings were damaged. The field survey of reinforced concrete school buildings in the affected area was carried out, and their residual seismic capacities(R) were estimated based on the Japanese Standard for post-earthquake damage evaluation. In this study, the M school, which was greatly damaged by the 2016 Gyeongju Earthquake, was selected, and its damage level was evaluated on the basis of the Japanese Standard. The seismic capacity of the M school was also evaluated using the nonlinear dynamic analysis, and relationships between its damage level and seismic capacity was also conducted to investigate causes of earthquake damage. The damage level of M school was classified into light with R=88.2%. The result of the dynamic analysis agreed reasonably well with the damage of M school sustained by the 2016 Gyeongju earthquake. This will provide fundamental data for earthquake preparedness measures, such as the seismic rehabilitation of low-rise reinforced concrete buildings in Korea.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.46-57
• /
• 1998

노스리지 지진하의 모멘트 저항 강 뼈대 구조물에 대한 사례연구결과를 요약하면 다음과 같다. 1) 탄성과 비탄성 동적해석 방법의 신뢰도가 구조물의 동적거동의 모형화에 크게 영향을 받는다는 것을 알 수 있었고 구조물의 동적거동의 모형화를 위한 보다 개선된 지침과 기준의 필요성이 부각되었다. 2) 비탄성 횡방향 정적해석은 6층높이의 건물까지는 비탄성동적해석과 유사한 결과를 보였으나 10층 이상의 건물에서는 고차 모드 효과를 고려하지 못하여 상당히 상이한 결과를 나타냈다. 3) 응답스펙트럼 해석은 노스리지 지진하에서 탄성 시간이력 해석에 비하여 100%까지 상이한 결과를 보였다. 특정지진에 대한 구조물거동의 상세조사시 응답 스펙트럼 해석 대신 시간이력해석을 수행하는 것이 바람직하다. 4) 탄성 부재력의 저항능력 비와 소성 회전각 등의 거동지수 등은 현존하는 건물의 연결부 손상을 검사하기 위한 지침을 마련하는데 도움을 줄 수 있지만 특정 연결부를 검사에서 배제시키는 유일한 근거로 사용되어서는 안될 것으로 판단된다.