• 한국지진공학회논문집
• /
• 제15권6호
• /
• pp.67-80
• /
• 2011

본 논문에서는 1:5 축소 10층 내력벽식 철근콘크리트(RC) 내력벽식 공동주택의 지진모의실험의 결과를 제시한다. 실험의 결과는 다음과 같다. (1) 본 실험 모델에서 재현주기 50년 지진에 대해서는 선형 탄성응답을 보이며, 우리나라의 설계지진에 대해서는 비선형 거동을 확인할 수 있다. (2) 재현주기 2400년의 최대지진에 대해 실험체의 강성 및 강도 저하가 현저하게 나타났다. (3) 횡 관성력에 대한 주 저항은 주로 엘리베이터 홀과 계단실 벽체로부터 유래되었다. (4) 실험체의 손상 및 파괴 모드는 벽과 슬래브의 휨 거동에 의해 지배되었다. 가진의 크기가 증가 할수록 현저한 강성의 저하와 고유주기의 증가가 발생하였다.

• Earthquakes and Structures
• /
• 제19권1호
• /
• pp.59-77
• /
• 2020

The code static eccentricity model for elastic torsional design of structures has two critical shortcomings: (1) the negation of the inertial torsional moment at the center of mass (CM), particularly for torsionally-unbalanced (TU) building structures, and (2) the confusion caused by the discrepancy in the definition of the design eccentricity in codes and the resistance eccentricity commonly used by engineers such as in FEMA454. To overcome these shortcomings, using the resistance eccentricity model that can accommodate the inertial torsional moment at the CM, interactive relations between shear and torsion are proposed as follows: (1) elastic responses of structures at instants of peak edge-frame drifts are given as functions of resistance eccentricity, and (2) elastic hysteretic relationships between shear and torsion in forces and deformations are bounded by ellipsoids constructed using two adjacent dominant modes. Comparison of demands estimated using these two interactive relations with those from shake-table tests of two TU building structures (a 1:5-scale five-story reinforced concrete (RC) building model and a 1:12-scale 17-story RC building model) under the service level earthquake (SLE) show that these relations match experimental results of models reasonably well. Concepts proposed in this study enable engineers to not only visualize the overall picture of torsional behavior including the relationship between shear and torsion with the range of forces and deformations, but also pinpoint easily the information about critical responses of structures such as the maximum edge-frame drifts and the corresponding shear force and torsion moment with the eccentricity.

• Wind and Structures
• /
• 제4권6호
• /
• pp.481-494
• /
• 2001

Wind tunnel pressure tests were conducted on a 1:100 scale model of a large industrial building with solar panels mounted parallel to the flat roof. The model form was chosen to have the same aspect ratio as the Texas Tech University test building. Pressures were simultaneously measured on the roof, and on the topside and underside of the solar panel, the latter two combining to produce a nett panel pressure. For the configurations tested, varying both the lateral spacing between the panels and the height of the panels above the roof surface had little influence on the measured pressures, except at the leading edge. The orientation of the panels with respect to the wind flow and the proximity of the panels to the leading edge had a greater effect on the measured pressure distributions. The pressure coefficients are compared against the results for the roof with no panels attached. The model results with no panels attached agreed well with full-scale results from the Texas Tech test building.

• 한국지진공학회논문집
• /
• 제15권6호
• /
• pp.55-66
• /
• 2011

본 연구의 목적은 지진모의실험을 위한 1:5 축소 10층 R.C. 공동주택 모델의 제작과정을 통하여, 실험체의 효율적인 설계 및 제작 과정을 개발하는 것이다. 실험체의 축소율은 가용한 진동대의 크기($5m{\times}5m$)와 최대 허용무게(600kN)및 모델 철근(D3 볼트, ${\phi}2$ 강선)의 경제성과 상용성을 고려하여 결정하였다. 모델 철근은 현장에 바로 설치하기 어렵기 때문에 철망을 제작한 후 현장에서 조립하였다. 벽체와 슬래브를 동시에 타설할 경우 거푸집의 탈형이 매우 어렵기 때문에, 벽체를 먼저 타설하고 양생 후 탈형한 뒤 슬래브 거푸집을 설치하였다. 벽체 거푸집은 반복 사용이 가능한 Slip form 형태로 한쪽은 합판, 다른 한쪽은 아크릴로 제작하여 타설시 밀실도를 확인할 수 있도록 하였다. 1:5 축소 10층 R.C. 공동주택모델을 제작하기 위해 총 제작 기간은 약 6개월이 소요되었으며, 전임 연구원 5명, 작업보조원 612명 일의 인원이 투입되었다.

• 한국주거학회논문집
• /
• 제17권5호
• /
• pp.47-54
• /
• 2006

This study aims to evaluate the sound insulation performance of Korean traditional paper(Hanji) windows as a material of environmental friendly building. Six types of traditional windows with 4 types of traditional window positions, were installed in l/2.5 scale model house. And then according to KS F 2235, comparative sound level differences between outdoor and indoor were measured. The main results are as follows; 1) TL(Transmission Loss) of Korean traditional paper windows, which cover one eighth of total balcony window, are ranged from 15 to 19 dB(A) in the living room and from 8 to 11 dB(A) in the balcony space. 2) TL of Korean traditional paper windows, which cover one fourth of total balcony window, are ranged from 10 to 19 dB(A) in the living room and from 8 to 10 dB(A) in the balcony space. 3) TL of Korean traditional windows with one side-one layer paper is ranged from 10 to 21 dB(A) and two side-one layer paper is 15 to 23 dB(A) and two side-two layer paper is 19 to 23 dB(A) respectively.

• 천문학회지
• /
• 제37권5호
• /
• pp.553-556
• /
• 2004

We present a new model for the generation of magnetic fields on large scales occurring at the end of cosmological reionisation. The inhomogeneous radiation provided by luminous sources and the fluctuations in the matter density field are the major ingredients of the model. More specifically, differential radiation pressure acting on ions and electrons gives rise to electric currents which induce magnetic fields on large scales. We show that on protogalactic scales, this process is highly efficient, leading to magnetic field amplitudes of the order of $10^{-1l}$ Gauss. While remaining of negligible dynamical impact, those amplitudes are million times higher than those obtained in usual astrophysical magnetogenesis models. Finally, we derive the relation between the power spectrum of the generated field and the one of the matter density fluctuations. We show in particular that magnetic fields are preferably created on large (galactic or cluster) scales. Small scale magnetic fields are strongly disfavoured, which further makes the process we propose an ideal candidate to explain the origin of magnetic fields in large scale structures.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.617-627
• /
• 2011

본 논문은 기 수행된 1:5축소 10층 RC 공동주택의 지진모의 실험결과에 비추어 근래 개발된 PERFORM-3D를 이용하여 해석적 모사를 시도하였다. 해석과 실험의 상관관계 분석에 의해 다음과 같은 결론을 얻었다. (1) 재현주기 50년 지진에 대해 실험과 해석이 매우 유사한 탄성거동을 보였다. 반면 우리나라의 설계지진과 최대지진에 대해서는 비선형 거동을 보이긴 하지만 실험의 최대응답과 강성 및 강도 저하를 제대로 모사하지 못하였다. 이의 주된 이유는 슬라브 거동을 탄성으로 가정하였기 때문이라고 판단된다. (2) 탄성영역 거동에 대해 해석모델이 전체 거동을 비교적 잘 모사하는 반면, 벽체 상호간에 걸친 힘의 분포에 있어서 실험과 상당한 차이를 보여주었다. (3) 최대지진에서 벽체의 전단변형은 비교적 잘 모사한 반면 휨변형의 경우 10배정도 과장되었다. 이는 일부 해석모델에서 인방보를 무시한 결과로 추정된다.

• Wind and Structures
• /
• 제34권5호
• /
• pp.395-405
• /
• 2022

Tornado-induced damages to high-rise buildings and low-rise buildings are quite different in nature. Tornado losses to high-rise buildings are generally associated with building envelope failures while tornado-induced damages to low-rise buildings are usually associated with structural or large component failures such as complete collapses, or roofs being torn off. While studies of tornado-induced structural damages tend to focus mainly on low-rise residential buildings, transmission towers, or nuclear power plants, the current rapid expansion of city centers and development of large-scale building complexes increases the risk of tornadoes impacting tall buildings. It is, therefore, important to determine how tornado-induced load affects tall buildings compared with those based on synoptic boundary layer winds. The present study applies an experimentally simulated tornado wind field to the Commonwealth Advisory Aeronautical Research Council (CAARC) building and estimates and compares its pressure coefficient effects against the Atmospheric Boundary Layer (ABL) flow field. Simulations are performed at the Wind Engineering, Energy and Environment (WindEEE) Dome which is capable of generating both ABL and tornadic winds. A model of the CAARC building at a scale of 1:200 for both ABL and tornado flows was built and equipped with pressure taps. Mean and peak surface pressures for TLV flow are reported and compared with the ABL induced wind for different time-averaging. By following a compatible definition of the pressure coefficients for TLV and ABL fields, the resulting TLV pressure field presents a similar trend to the ABL case. Also, the results show that, for the high-rise building model, the mean and 3-sec peak pressures are larger for the ABL case compared to the TLV case. These results provide a way forward for the code implementation of tornado-induced pressures on high-rise buildings.

• Wind and Structures
• /
• 제4권1호
• /
• pp.73-84
• /
• 2001

Analysis of pressures measured on the roof of the full-scale Texas Tech building and a 1/50 scale model of a typical house showed that the pressure fluctuations on cladding fastener and cladding-truss connection tributary areas have similar characteristics. The probability density functions of pressure fluctuations on these areas are negatively skewed from Gaussian, with pressure peak factors less than -5.5. The fluctuating pressure energy is mostly contained at full-scale frequencies of up to about 0.6 Hz. Pressure coefficients, $C_p$ and local pressure factors, $K_l$ given in the Australian wind load standard AS1170.2 are generally satisfactory, except for some small cladding fastener tributary areas near the edges.

• 한국주거학회논문집
• /
• 제21권2호
• /
• pp.59-67
• /
• 2010

The maintenance cost plays a important role to plan the scale of the apartment housing such as a number of household, building area and building type. Therefore, it is required to forecast the cost considering various maintenance characteristics. The maintenance characteristics are floor area, number of household, heating type, site area and etc.. In addition, the maintenance cost are classified into 5 area. These are a personal expense, facility maintenance cost, energy and water cost, insurance and sanitary cost. These five cost area are related with various characteristics and brought up the estimation model using the stepwise multiple regression analysis. The energy and heating cost share over the 50% in the total cost and the personal expense cost shares about 40%. The personal expense cost per area is 5,272 won/$m^2{\cdot}yr$ irregardless of heating type and the district heating type is a higher cost than other type. In facility maintenance cost, the central heating type is 2,015 won/$m^2{\cdot}yr$ and higher than other type. The estimation models have good statistics in each model. Most of the model have a determination coefficient over 0.7 and Durbin Watson value between 1.5 and 2.5.