• Transactions of Materials Processing
• /
• v.33 no.4
• /
• pp.261-269
• /
• 2024

This study aimed to optimize the MIL-53 metal-organic framework coatings for enhanced durability in carbon dioxide capture applications. We synthesized MIL-53 powders using a hydrothermal method and deposited them on stainless-steel substrates by spin coating at various speeds, ranging from 300 to 2,000 rpm. The microstructure, surface properties, and tribological characteristics of the coatings were analyzed systematically. The results indicated that the spin speed significantly impacted the coating uniformity and defect formation. Coatings prepared at moderate speeds of 500 to 1,000 rpm exhibited optimal thickness and density, resulting in superior wear resistance. The tribological tests revealed that the coatings prepared at 700 to 1000 rpm had the lowest wear rates. These findings offer valuable insights for the development of durable MOF-based coatings for carbon dioxide capture and other applications requiring long-term stability under mechanical stress.

• Clean Technology
• /
• v.14 no.1
• /
• pp.21-28
• /
• 2008

The properties of the dispersion of the red, green, and blue pigments were investigated for the manufacture of the millbase of LCD color filters. Their physical properties and viscosity were controlled to apply to the screen printing in order to substitute the existing photolithography method. The best dispersion properties were obtained with dispersant BYK-2000 and monomer EB-140. The millbase was pre-mixed at 500 rpm for 30 min, and dispersed at 4000 rpm for 5 - 6 hour by Torus Mill. The resulting particle sizes were $100{\sim}110\;nm$ for red, $50{\sim}70\;nm$ for green, and $60{\sim}80\;nm$ for blue. When the millbase viscosity was 200-300 cps in the low viscosity formulation, an efficient impact of the beads on pigments was achieved. The dispersion properties were confirmed from the rheological behavior and color characteristics.

• Particle and aerosol research
• /
• v.11 no.1
• /
• pp.9-19
• /
• 2015

This study investigated the effects of ball mill operation condition on the morphology of raw powders in the dry-type milling process using three types of ball mills traditional ball mill, stirred ball mill and planetary ball mill. Furthermore, since spherical powders offer the best combination of high hardness and high density, the optimum milling condition to produce sphere-shaped powders was studied. The applied rotation speed ranged from 200rpm (low rotation speed) to 700rpm (high rotation speed). The used ball size ranged from 1mm to 5mm. The metal powder morphology was studied using SEM, XRD and PSA. The aimed spherical powders could be obtained under the optimum experimental conditions: traditional ball mill(200rpm, 1mm ball), planetary ball mill (500rpm, 1mm ball) and also planetary ball mill (700rpm, 1 and 3 mm ball). The results show to the development of new material using spherical type copper powder/CNT composites for air-craft and automotive applications.

• Journal of Life Science
• /
• v.14 no.1
• /
• pp.67-71
• /
• 2004

Oriental melon vinegar was prepared by two stage fermentations of alcohol and acetic acid. In the alcohol fermentation using oriental melon residual products, alcohol content showed 7.43% in 17$^{\circ}$ brix of initial sugar concentration and 80 h of fermentation time. In the acetic acid fermentation using oriental melon alcohol, acidity showed 5.25% in 250rpm of agitation rate and 200 h of fermentation time. The cultivation esults of oriental melons using its vinegar are as follows. Quantity and quality of samples treated with 500, 1,000 and 2,000 times of oriental melon vinegar were higher than that of control : weight, quality, sugar content and goods production rate were higher to degree of 33∼42 g/piece, 370 ∼460kg/10a, 0.6∼.9$^{\circ}$ Brix, 2∼5%, respectively. Coods production yield of samples treated with 500, 1,000 and 2,000 times of oriental melon vinegar was higher (400∼610 kg/10a) than that of control. The results of control of powdery mildew on oriental melons using oriental melon vinegar as the diluted solution with 500 and 1000 times were identical for control value that used by agrochemical. Powdery mildew were exterminated by 2nd treatment of the diluted solution. In case of aphids, the diluted solution with 500, 1,000 and 2,000 times of oriental melon vinegar exterminated thoroughly by 2nd treatment.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.509-514
• /
• 2002

Experiments were carried out to optimize the fermentation conditions for the production of erythritol by salt-tolerant mutant, Candida magnoliae M26. The optimum conditions of erythritol production showed a 1.0 vvm aeration and 500 rpm agitation at 28$\^{C}$ with an initial medium pH of 7.0. The pH control during the fermentation did not improve the erythritol yield and productivity. The maximum erythritol concentration of 143.3 g/L was obtained with 57% yield and 0.70 g/L-h productivity from 250 g/L of glucose and 5 g/L of yeast extract under an optimum fermentation conditions. The medium containing 0.5 M KCl or 0.5 M NaCl enhanced the production of erythritol and glycerol. However, glycerol production increased and erythrtiol production decreased by increasing the concentration of NaCl or KCl.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.9
• /
• pp.9-15
• /
• 2005

This paper describes the test carried out on an experimental study of fuselage drag and stability characteristics of a helicopter configuration and the test techniques developed for the testing and the lessons learned in the Agency for Defense Development Low Speed Wind Tunnel(ADD-LSWT). The main objective of this test is to determine the drag and stability characteristics of helicopter configurations according to the various configuration changes. The fuselage model with a highly modular structure is a representation of 1:8 scale of the external contour of the conceptual design helicopter configuration with rotating main rotor hub including blade stubs capable of rotating up to 500 rpm. The test results are compared with the available similar data and fair to good agreement is obtained.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.529-537
• /
• 1993

The mecllanical properties of AI/TiCp composite fabrication by liquid mixing was investigat ed. The composites, containing 10 wt% Tic. were producwi using induction furnace with mechanical stirring. The amounts of' 1.5wt% Mg were, added to wetting agents. Thr presence of aluminum in TiC composites showed rnhanced strengrh without loss of ductility at room and clrvated temperatures. Espe cially, wear resistance was found to dramatically irnprovc. I3ul excess stirring d~terrninrd the mect~ani~ cal properties. Approximate values at present work were 500 rpm. There was no inrerfacial reaction of any kind and the interface remains clearly deineated.

• Journal of Sericultural and Entomological Science
• /
• v.49 no.1
• /
• pp.28-32
• /
• 2007

This study was carried out to investigate the utilization of hemolymph of silkworm, Bombyx mori, as a substitute for fetal bovine serum(FBS) in the insect cell culture. Hemolymph is collected on a small scale by clipping the abdominal leg; however, this method is not appropriate for large scale collection. The hemolymph was collected from 5 th instar larva by centrifugation after cutting of the abdominal legs was more appropriate procedure for large scale collection. The cell growth in the medium supplemented with hemolymph(Baekokjam) collected in large scale was almost same as that in the medium hemolymph supplemented with hemolymph collected in small scale. However, the mutant($wE^b$) hemolymph collected in large scale was still less effective in the cell growth, as compared to the Baekokjam hemolymph collected in large scale. The optimum centrifugation condition for large-scale bleeding was 500 rpm and 15 min.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.457-468
• /
• 2023

The purpose of this study is to develop a high-speed combine harvester. The performance was evaluated by composing a dynamic simulation model of a threshing cylinder and analyzing the amount of threshed rice grain during threshing operations. The rotational speed of the threshing cylinder was set at 10 rpm intervals from 500 rpm until 540 rpm, based on the rated rotational speed of 507 rpm. The rice stem model was developed using the EDEM software using measured rice stem properties. Multibody dynamics software was utilized to model the threshing cylinder and tank comprising five sections below the threshing cylinder, and the threshing performance was evaluated by weighing the grain collected in the threshing tank during threshing simulations. The simulation results showed that section 1 and 2 threshed more grains compared to section 3 and 4. It was also found that when the threshing speed was higher, the larger number of grains were threshed. Only simulation was conducted in this study. Therefore, the validation of the simulation model is required. A comparative analysis to validate the simulation model by field experiment will be conducted in the future.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.197-202
• /
• 2010

Purpose: Recently, many hospitals have been tried to increase the satisfaction of the outpatients through blood-gathering, exam, result notice and process in a day. Each laboratory has been used the automatic equipment for the rapid requests of the result notice and the increase of the reliability and efficiency. Current automatic equipments that have been limited short TAT(Turn-Around Time)because of the restricted batch lists and 1 tip-5 detectors. The Gamma Pro which is made in Korea to improve the shortcomings of existing automation equipment, complemented with capacity to perform a wide range of domestic automation equipment. In this study, we evaluated the usefulness and reliability of short TAT by comparing Gamma Pro with current automatic equipment. Materials and Methods: We studied the correlation between Gamma Pro and RIA-mat 280 using the respective 100 specimens of low or high density to the patients who were requested the thyroid hormone test (Total T3, TSH and Free T4) in Samsung Medical Center Sep. 2009. To evaluate the split-level Gamma Pro, First, we measured accuracy and carry over on the tips. Second, the condition of optimal incubation was measured by the RPM (Revolution Per Minute) and revolution axis diameter on the incubator. For the analysis for the speed of the specimen-processing, TAT was investigated with the results in a certain time. Result: The correlation coefficients (R2) between the Gamma Pro and RIA-mat 280 showed a good correlation as T3 (0.98), TSH (0.99), FT4 (0.92). The coefficient of variation (C.V) and accuracy was 0.38 % and 98.3 % at tip 1 and 0.39 % and 98.6 % at tip 2. Carry over showed 0.80 % and 1.04% at tip 1 and tip 2, respectively. These results indicate that tips had no effect on carry over contamination. At the incubator condition, we found that the optimal condition was 1.0mm of diameter at 600RPM in 1.0mm and 1.5mm of at 500RPM or 1.0mm and 1.5 mm of diameter at 600 RPM. the Gamma Pro showed that the number of exam times were increased as maximum 20 times/day comparing to 6 times/day by current automatic equipment. These results also led to the short TAT from 4.20 hour to 2.19 hours in whole processing. Conclusion: The correlation of between the Gamma Pro and RIA-mat 280 was good and has not carry over contamination in tips. The domestic automation equipment (Gamma Pro) decreases the TAT in whole test comparing to RIA-280. These results demonstrate that Gamma Pro has a good efficiency, reliability and practical usefulness, which may contribute to the excellent skill to process the large scale specimens.