• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.9-14
• /
• 2011

The excess molar enthalpies $H_m^E$ at T=298.15 K and p=101.3 kPa of ternary system {1,2-dichloropropane (1,2-DCP) + 1,3-dioxolane+ 1,4-dioxane} were predicted by using the binary contribution model of $Radojkovi{\check{c}}$ with correlated sub-binary Redlich-Kister parameters. Excess partial molar enthalpies ${\bar{H}}_i^E$ were also calculated for the binary systems {1,2-dichloropropane + 1,3-dioxolane}, {1,2-dichloropropane + 1,4-dioxane} and {1,3-dioxolane + 1,4-dioxane} using adjustable parameters of Redlich-Kister equation. By extrapolation of excess partial molar enthalpies to infinite dilution, limiting excess partial molar enthalpies ${\bar{H}}_i^{E,{\infty}}$ of each component were also obtained. The ternary excess molar enthalpies excess partial molar enthalpies of these sub-binary systems have been calculated by using our previously reported results.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.444-452
• /
• 2006

This paper reports experimental excess molar volumes $V^E_m$ using a digital vibrating-tube densimeter and excess molar enthalpies $H^E_m$ by means of an isothermal microcalorimeter with a flow mixing cell for the binary mixtures{1,2-dichloropropane + 2-(2-methoxyethoxy)ethanol} and {1,2-dichloropropane + 2-(2-ethoxyethoxy)ethanol} at 298.15 K under atmospheric pressure. All the $V^E_m$ and $H^E_m$ of the two binary mixtures showed S-shaped forms, being negative for poor and positive for rich 1,2-dichloropropane mole fractions. These show that the excess properties were shown to be negative deviation from ideality due to the strong self-association effect among 2-(2-alkoxyethoxy)ethanol molecules at an early stage of mixing, a relatively high energy then is needed to break hydrogen bonds of 2-(2-alkoxyethoxy)ethanol with an increase ofhalogenated hydrocarbon molecular at high mole fraction of 1,2-dichloropropane. The values of excess molar properties($V^E_m$ and $H^E_m$) were fitted by the Redlich-Kister equation using Nelder-Mead's simplex pattern search method. The Wilson, NRTL, and UNIQUAC models were used to correlate the $H^E_m$ values.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.2
• /
• pp.193-198
• /
• 2001

2성분계 혼합물(1,2-dichloropropane + 2-methoxyethanol)에 대해 과잉몰 부피(excess molar volumes) $V^E$ 및 과잉 몰엔탈피(excess molar enthalpies) $H^E$를 298.15K에서 측정하였다. 혼합물의 밀도측정은 digital vibrating tube densimeter를 이용하였고, 과잉 몰엔탈피는 isothermal flow microcalorimeter를 이용하였다. 측정한 과잉 몰부피는 전 조성 영역에서 양의 편차를 나타내었으며, 과잉 몰엔탈피는 S 자형용 보였다. 또한 얻어진 data는 Nelder- Mead의 simplex method를 이용하여 Redlich-Kister 다항식에 접합 (fitting)하였다.

• Toxicological Research
• /
• v.35 no.4
• /
• pp.361-369
• /
• 2019

1,2-Dichloropropane (1,2-DCP) has been used as an industrial solvent and a chemical intermediate, as well as in soil fumigants. Human exposure may occur during its production and industrial use. The target organs of 1,2-DCP are the eyes, respiratory system, liver, kidneys, central nervous system, and skin. Repeated or prolonged contact may cause skin sensitization. In this study, 1,2-DCP was dissolved in corn oil at 0, 2.73, 5.75, and 8.75 mL/kg. The skin of mice treated with 1,2-DCP was investigated using western blotting, hematoxylin and eosin staining, and immunohistochemistry. 1,2-DCP was applied to the dorsal skin and both ears of C57BL/6J mice. The thickness of ears and the epidermis increased significantly following treatment, and the appearance of blood vessels was observed in the dorsal skin. Additionally, the expression of vascular endothelial growth factor, which is tightly associated with neovascularization, increased significantly. The levels of protein kinase-B (PKB), phosphorylated PKB, mammalian target of rapamycin (mTOR), and phosphorylated mTOR, all of which are key components of the phosphoinositide 3-kinase/PKB/mTOR signaling pathway, were also enhanced. Taken together, 1,2-DCP induced angiogenesis in dermatitis through the PI3K/PKB/mTOR pathway in the skin.

• The Korean Journal of Physiology and Pharmacology
• /
• v.5 no.4
• /
• pp.359-366
• /
• 2001

We have synthesized a novel platinum(II) coordination complex containing cis-1,2-diaminocyclohexane (DACH) as a carrier ligand and 1,3-dichloropropane (DCP) as a leaving group. A new series of [Pt(cis- DACH)(DCP)](PC) was evaluated for its cytotoxic activity on MKN-45 human gastric adenocarcinoma cells and normal primary cultured kidney cells. The new platinum complex has demonstrated high efficacy in the cytotoxicity against MKN-45/P, MKN-45/ADM and MKN-45/CDDP cell-lines. The cytotoxicity of PC against rabbit proximal renal tubular cells, human renal cortical cells and human renal cortical tissues, determined by MTT assay, the $[^3H]-thymidine$ uptake and glucose consumption tests, was found to be quite less than those of cisplatin. Based on these results, this novel platinum(II) coordination complex appears to be better for improving antitumor activities with low nephrotoxicity and is a valuable lead in the development of new, clinically available anticancer chemotherapeutic agents.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.1-10
• /
• 2007

This study accomplished to grasp the present condition of HAPs and to examine efficiently carcinogenic and non-carcinogenic health effects through health risk assessment in new apartments from June, 2004 to May,2005. Moreover, we performed uncertainty analysis by Monte-Carlo analysis to control uncertainty of exposure factors. The major results obtained from this study were as follows. Firstly, cancer risk of formaldehyde for male was $1.67{\times}10^{-5}$ in CTE in point estimation. Cancer risk of formaldehyde was showed $2.94{\times}10^{-3}$ in RME that applied worst case used results of 95 percentile in point estimation. It exceeds $10^{-6}$ of guide line in US EPA. Moreover, cancer risks of formaldehyde for female were $3.98{\times}10^{-5}$ in CTE and $3.93{\times}10^{-3}$ RME. Secondly, every hazard index for non-carcinogenic pollutants was less than 1 of permitted standards in CTE. However, in RME of male, hazard indexes of 1,2-Dichloropropane and Toluene were 1.3 and 2.0, respectively. Hazard indexes of 1,2-Dichloropropane and Totuene for female in RME were 1.7 and 2.6, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.287-291
• /
• 1997

The photochemical reaction of aqueous dichloromethane in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The irradiation of the solution causes the formation of 1,2-dichloroethane, 1,1,2-trichloroethane, 1,1,2,2-tetrachloroethane and chloride ion. The initial quantum yield of the products in the absence of oxygen was determined to be 8.6 × 10-3, 7.3 × 10-3, 4.4 × 10-3 and 2.3 × 10-2, respectively. In addition to these main products, small amounts of 1,2,3-trichloropropane, 1,1,2,2,3-pentachloropropane, 1,1,2,3,3-pentachloropropane, 1,3-dichloropropane and 1,1,2,2,3,3-hexachloropropane were detected. In the presence of oxygen, hydrogen peroxide was also detected along with the products listed above. With increasing the concentration of oxygen, while formation of the chlorinated organic products diminished, formation of chloride ion increased. Probable reaction mechanisms for the photochemical reaction were presented on the basis of products analysis.

• Fire Science and Engineering
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2000

Flux, essentially used in soldering process of PCB (Printed Circuit Board) in electronics industry, contains IPA (Isopropyl alcohol) and methanol, which are highly inflammable and explosive. Hazard Chemical Controlling Law classified methanol as toxic material and Environmental Law classified methanol as VOC (Volatile Organic Compound). So there have been pressing needs of developing substitutes for the existing Flux. New solvent which is non-flammable and main component is DCP having same specific character of the existing Flux. It's been combirated with proper composition ratio adding stabilizer. As a result, it relieved working Environment Allowance thickness 200 ppm to 470 ppm, chance of not been soldered 0.083% to 0%, spread 85% to 87%, power saving resistance 1.0$\times$$10^{12}$$\Omega$ to 6.9$\times$$10^{12}$$\Omega$, which means a lot better than the existing Flux. Therefore, Flux confirmed the chance of improving productivity, safety, environment safety and quality. Also, Flux got a satisfied result after product quality test and product reliability test.