• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1990-1998
• /
• 2017

The success of naval operation prioritizes the implementation of a robust communication network that delivers accurate and prompt communications to one another. The satellite, which is the main communication network of the military, is required to construct a preliminary communication network because of the enemy radio disturbance and weak point of fixed antenna. The military operational communication network has been in transition from voice-centered wireless communication network to text message-based communication network. In this paper we suggest an enhanced communication method built on Roll Call, the main communication method of ROK Navy operating tactical data link called Link-11. Simulation results display that the proposed method reduces the transmission time per unit frame by 4.3 times compared to the Roll Call and 6.3 times compared with the Round Robin & Broadcasting; it is also proved that the higher the direct reception rate, the shorter the transmission time required by 1.6 times maximum.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1291-1298
• /
• 2004

In development of monitoring and control systems, one of the most important points is to consider a redundancy so that the system can be operated normally although hardware faults are partly occurred. The purpose of this paper is to introduce a monitoring and control system with a redundancy function for I/O servers and communication networks. I/O servers composed with an active server and a standby server. Each server also has 3 communication ports, 2 ports of them were connected to field units and the other 1 port was connected to the other server. Field units have to be constructed to 2 communication ports connected I/O servers through communication lines. Also, server communication module was implemented for analyzing and handling fault elements. and was submodularized for linking easily with a monitoring and control module. An experiment with 2 servers and 2 field units was constructed to demonstrate its effectiveness.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.156-166
• /
• 2020

In this study, through an AHP (Analytic Hierarchy Process) analysis, the internal construction project was designed to analyze the factors affecting the performance of the project and provide suggestions on the quality of communication. To carry out this study, a selection factor was selected by referring to AHP theory and existing prior research. AHP technique was used to collect weights after analysis, examine and analyze gaps. In the interior construction project, the most important factor among the factors influencing the quality of communication to the project performance was communication interaction. Among the sub-factors, accuracy of exchange of information and timeliness of communication were shown in the order of importance. Looking at the results of comprehensive analysis of the first and second layers, the accuracy of information exchange among the elements of communication quality was found to be the number 1 in weight. The timeliness of communication, which is ranked second, and communication that takes place at an appropriate time can lead to efficiency in shortening the project execution period by eliminating unnecessary work. And, Among the factors that affect communication quality, it was analyzed that communication method is not an important factor when compared to other factors. This study shows that quality of communication influences the performance of interior construction projects and provides suggestions for improving communication quality. And it has been confirmed that managing communication quality can act as an important issue that can improve business performance in project execution and production of results.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.29-33
• /
• 2015

In this paper, we propose the method to improve the performance of the antenna system that contains three bands, such as Lte3G, WLAN and Lte4G. This antenna has an advantage that can cover the three different frequency bands 2.1GHz, 2.4GHz and 2.6GHz through one antenna design. The design and simulations are done using CST Microwave Studio 2014 program. The antenna is designed by using the FR-4 (lossy) substrate with the dielectric constant of er=4.3 and dielectric loss tangent 0.025. The substrate dimensions are the following; Thickness[h] is 1.6mm, Length is 90mm, and Width is 40mm. The ground is designed by using the PEC material with h=0.035mm. The patch is designed by using the copper with h=0.035mm. In the near future, we will fabricate the antenna, which we have designed, and then apply this antenna to the mobile communication system. And we will test this mobile communication system for the diverse environments.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.3 no.1
• /
• pp.43-50
• /
• 1985

This paper describes an algorithm recognizing multi-font printed numeric characters. In order to extract feature selection of printed numeric characters. this paper describes an algorithm using stoke density function. Printed numeric characters are recognized by using the set of stroke-density feature vectors.

• Journal of IKEEE
• /
• v.18 no.1
• /
• pp.37-44
• /
• 2014

In this paper we present an LDO based on an error amplifier. The designed error amplifier has a gain of 89.93dB at low frequencies. This amplifier's Bandwidth is 50.8MHz and its phase margin is $59.2^{\circ}C$. Also we proposed a BGR. This BGR has a low output variation with temperature and its PSRR at 1 KHz is -71.5dB. For a temperature variation from $-40^{\circ}C$ to $125^{\circ}C$ we have just 9.4mV variation in 3.3V LDO output. Also it is stable for a wide range of output load currents [0-200mA] and a $1{\mu}F$ output capacitor and its line regulation and especially load regulation is very small comparing other papers. The PSRR of proposed LDO is -61.16dB at 1 KHz. Also we designed it for several output voltages by using a ladder of resistors, transmission gates and a decoder. Low power consumption is the other superiority of this LDO which is just 1.55mW in full load. The circuit was designed in $0.35{\mu}m$ CMOS process.

• Journal of Korean Library and Information Science Society
• /
• v.24
• /
• pp.81-106
• /
• 1996

Without an accurate understanding of information needs of library users, an efficient services can't be implement. And we can expect that there is a difference between query statement and actual information needs of users. It also will occur difference in the process of librarian's interpretation of query statement because of an inaccurate presentation and their different working experiences. It means that there is a communication problems between users and librarians. The purpose of this study is to provide the techniques of face to face communication between users and librarians as a method of efficient library service activities. And focused on the importance of non-language communication. The effectiveness of this study are as follows: 1. With the understanding of information flow, librarians can expand the extent of library services. 2. Knowing that how to communicate with users at the a n.0, ppropriate degree, librarians can improve the communication techniques. 3. Expanding the satisfaction of information services and heitening the reliability of users. 4. From the analysis of user information needs, librarians can convert present system to the proper service-oriented system. 5. Knowing the importance of non-language communication, librarians can improve the service environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.238-246
• /
• 2024

Modern military operations rely heavily on broadband communication and data transmission. Recently, the rising use of intelligent unmanned technology necessitates more frequencies. Free-space optical(FSO) communication can offer high-data-rate communications with high security and no need for licensing. Therefore, the FSO communication holds significant interest and potential in the defense industry. In this paper, we present design of a FSO communication terminal taking Korean domestic weather conditions into account. The domestic atmospheric attenuation is analyzed using several models and two-year meteorological information for a city in Korea, and this analysis is utilized to design the FSO communication terminal. The design results were verified using an FSO communication test bed, and we achieved an Ethernet bandwidth of approximately 1.86 Gbps at a distance of 1.3 km with the optical amplifier output power of the test bed set to about 20 dBm.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.105-114
• /
• 2006

In this paper, 3D input and output systems for a web-based real-time 3D video communication system using IEEE 1394 digital cameras, Intel Xeon Server system and Microsoft Directshow library is proposed. And some conditions for optimizing the operations of the stereo camera, 3D display and signal processing system are analyzed. Input & output systems are carefully selected, which can satisfy the required optimization conditions and the final 3D video communication system is implemented by using three optimized devices. The overall control system is developed with Microsoft Visual C++.Net and Microsoft DirectX 9.1 SDK. Some experimental results show that the observer can feel the natural presence from multi-view(4-view) 3D video of server system in real-time and also can feel the natural presence from 3D video of client system and finally suggest an application possibility of the proposed web-based real-time 3D video communication in real fields.

• Rapid Communication in Photoscience
• /
• v.1 no.2
• /
• pp.31-33
• /
• 2012

The Fluorescent 7-aminodipyrido[3,2-a:2',3'-c]phenazine (7-amino-dppz, 1) is functionalized as an europium ion ($Eu^{3+}$) sensor, which showed the effective emission quenching when europium cation is chelated to the bpy site of 1 compound. The complexation ratio indicated that the 1 compound forms a 1 : 1 complex with $Eu^{3+}$.