• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.44-49
• /
• 2005

This paper investigates strength characteristics and stress-strain behaviors of unreinforced and reinforced lightweight soils. Lightweight soil, composed of dredged soil, cement, and air-foam, was reinforced by a waste fishing net, in order to increase its compressive strength. Test specimens were fabricated by various mixing conditions, such as cement content, initial water content, air content, and waste fishing net; then, unconfined compression tests were carried out on these specimens. From the test results, it was shown that reinforced lightweight soil had different behavior after failure, even though it had similar behavior as unreinforced lightweight soil before failure. The test results also showed that stress became constant after peak strength in reinforced lightweight soil, while the stress decreased continuously in unreinforced lightweight soil. It was observed that the strength was increased due to reinforcing effect by the waste fishing net for most cases, except high water content greater than $218\%$. In the case of high water content, a reinforcing effect is negligible, due to slip between waste fishing net and soil particles. In reinforced lightweight soil, secant modulus (E50) was increased, due to the inclusion of waste fishing net.

• Fisheries and Aquatic Sciences
• /
• v.3 no.2
• /
• pp.156-162
• /
• 2000

Model experiments for a purse seine were carried out in order to measure the geometry of net shape and to estimate an enclosed volume by using 1177 scale model purse seine of 12.62m float line from an offshore mackerel purse seine. A model purse seine was set from a net box of shooting equipments and then pursing and hauling net by hauling equipment. The 3- D geometry shape of the purse seine net during hauling operation was measured by video image processing and tension of purse line by load cell. The 3-D geometry of the model purse seine during hauling operation could be represented with variables such as a ratio of shooting diameter or maximum net depth and a ratio of hauling operation time. Horizontal shapes of float line and lead line were varied from a circle after shooting to an ellipse with pursing and hauling. Projected lateral shape of purse line was observed and formulated as a shape of a water drop. The cross sectional shapes of curved net from two directions were varied such as sine function or polynomial curves. Therefore, enclosed volume of a purse seine in relation to fish school behaviour can be approximated using two main variables from relevant equations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.3
• /
• pp.227-233
• /
• 2005

In order to estimate the effective horse power(EHP) in towing net of a bottom trawl ship, the ship's resistance was calculated by using a series data of Yamagata and Wigley formula. Also the effective horse power for a ship(EHPs) was estimated versus the ship speed in sailing and the propulsive efficiency was calculated with the brake horse power and the effective horse power. Then the effective horse power for a ship and a trawl net were estimated in the application of the propulsive efficiency in towing net. The total effective horse power($EHP_T$) was average 187.6kW and the effective horse power for a 1.awl net($EHP_n$) was average 176.7kW at a smooth sea state in towing net. The ratio of $EHP_n$ to $EHP_T$ was about 94.0% and the value was higher slightly than was already informed at a smooth sea state. The power for keeping up a townet speed was required more about 20% of a maximum continuous power at a rather rough sea state than a smooth sea state. In the future, if the residual resistance is considered with a sea state, $EHP_n$ will be estimated more correctly Also the data of EHP estimated by this method will be used as the basic data to design a trawl net.

• Journal of Information Management
• /
• v.29 no.2
• /
• pp.1-17
• /
• 1998

The Inno-NET, which is based on the Internet and up-to-date information technology, is a consolidated system to provide business-related information and to solve the difficulties in business activities. In particular, the Inno-NET is an information system to integrate such business information for enterprise as start-up, financing, technology development, recruiting, site acquisition, marketing, trade and investment and so on, in order to help companies solve their problems and make up for their weak points. Accordingly, the Inno-NET will systematically connect supporting agencies and innovative enterprises, thus guaranteeing the exchange of information among them and coordinating the business. The supporting agencies will be included government offices, public organizations, research institutes, universities, and industrial associations all over the ministries. In short, Inno-NET forms a real-time decision making system among government, industries, universities and research institutes. by elt:ictronic networking on the Internet.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.570-576
• /
• 2010

This paper presents the use of the Petri Net Method for modeling railway tracks. The Petri Net is defined as having the characteristics of a parallel, asynchronous, distributed, inconclusive, statistical, etc. information handling system and is a graphical mathematical modeling tool to study the specifics of active movement. It's proven use can be seen at the Korean type Light Rail testing tracks where they modelled the Petri Net method using the train track encasing the segment, track, turnout, and platform as a singular factor and even though two trains either travelling in the same or opposite directions on a single test track equipped with a sidetrack can travel with the guarantee that the two will not collide.

• Journal of Korea Foresty Energy
• /
• v.21 no.1
• /
• pp.25-31
• /
• 2002

This study was carried out to estimate aboveground biomass and net primary production in an average 37-year-old Quercus acutissima stand of Pohang area. Ten sample trees were cut in the forest and soil samples were collected in August, 2001. Estimation for aboveground biomass and net primary production was made by the equation model Wt=$aD^b$ where Wt is ovendry weight in kg and D is DBH in cm. Total aboveground biomass was 115.47ton/ha in the study forest. The proportion of each tree component to total aboveground biomass was high in order of bolewood(63.9%), branches(19.8%), bolebark(16.2%) and leaves(1.2%) in the study forest. Aboveground total net primary production was estimated at 7.89ton/ha in the study area. The proportion of each tree component to total net primary production was high in order of bolewood, bolebark, branch, and leaves.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.1
• /
• pp.60-68
• /
• 2009

Because of the reduced product life-cycle, industries are making an effort to bring down the process planning time. In the traditional approach, we have to analyze established process planning, then design the time chart based on process information and drawing the formal time chart such as SOP(sequence of operation). Thereafter, it will be converted to PLC code that is a time consuming and redundant job. Similarly, Industrial automated process uses PLC Code to control the factory; however, control information and control code(PLC code) are difficult to understand. Hence, industries prefer writing new control code instead of using the existing one. It shows the lack of information reusability in the existing process planning. As a result, to reduce this redundancy and lack of reusability, we propose SOS-Net modeling method. Unlike past stabilized process planning that is rigid to any change; our proposed SOS-Net modeling method is more adaptable to the new changes. The SOS-Net model is easy to understand and easy to convert into PLC Code accordingly. Therefore, we can easily modify the control information and reuse it for new process planning. The proposed model plays an intermediary role between process planning and PLC code generation. It can reduce the process planning and implementation time as well as cost.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.05a
• /
• pp.222-229
• /
• 2002

A value net is a business design that uses digital supply chain concepts to achieve both superior customer satisfaction and company profitability. In order to implement the value net model, information processing and distribution needs to occur in real time. Software agent technology is becoming popular due to the inherent characteristics of autonomy, distributedness and modularity. In this paper, we adopt agent technology to handle all real time decision process, making the value net model a complex multi-agent network of decision makers. For the agents to properly coordinate their respective activities we develop MAVN model, a Web-based multi-agent language grounded in the XML and Java.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.856-866
• /
• 2015

A heterogeneous network (HetNet) is a network topology composed by deploying multiple HetNets under the coverage of macro cells (MCs). It can improve network throughput, extend cell coverage, and offload network traffic; for example, the network traffic of a 5G mobile communications network. A HetNet involves a mix of radio technologies and various cell types working together seamlessly. In a HetNet, coordination between MCs and small cells (SCs) has a positive impact on the performance of the networks contained within, and consequently on the overall user experience. Therefore, to improve user-perceived service quality, HetNets require high-efficiency network protocols and enhanced radio technologies. In this paper, we introduce a 5G HetNet comprised of MCs and both fixed and mobile SCs (mSCs). The featured mSCs can be mounted on a car, bus, or train and have different characteristics to fixed SCs (fSCs). In this paper, we address the technical challenges related to mSCs. In addition, we analyze the network performance under two HetNet scenarios-MCs and fSCs, and MCs and mSCs.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.115-124
• /
• 2016

In this paper, a method to generate the extended model automatically on the critical elements in enterprise system based real time distributed architecture as well as the platform specific model(PSM) for Microsoft(MS) .NET platform is proposed. The key ideas of this method are real time distributed architecture should performed with satisfying strict constraints on life cycle of object and response time such as synchronization, transaction and so on, and .NET platform is able to implement functionalities including before mentioned by only specifying Attribute Code and maximizing advantages of MDA. In order to realize the ideas, functionalities which should be considered enterprise system development are specified and these are to be defined in Meta Model and extended UML profile. In addition, after definition of UML profile for .NET specification, by developing and applying these into plug-in of open source MDA tool, and extended models are generated automatically through this tool. Accordingly, by using proposed specification technology, the profile and tools easily and quickly reusable extended model can be generated even though low level of detailed information for functionalities which is considered in .NET platform and real time distributed architecture. In addition, because proposed profile is MOF which is basis of standard extended and applied, UML and MDA tools which observed MOF is reusable.