• Membrane Journal
• /
• v.29 no.5
• /
• pp.276-283
• /
• 2019

In this study, The experiments of the confirmation of the fouling phenomena in CDI process and the establishment of its removal process conditions were carried out. The foulant concentrations of humic acid sodium salt (HA) added to the feed solution were 5, 10, 15 mg/L, respectively. The occurrence of fouling under the certain adsorption/desorption conditions could be confirmed with an increase in adsorption and desorption concentration curve over time. Both the voltage and time in adsorption and desorption processes were changed to eliminate the fouled pollutants. Typically, the fouling removal condition was found at the adsorption condition 1.2 V/5 min and the desorption condition -3 V/2 min, respectively.

• Clean Technology
• /
• v.17 no.2
• /
• pp.142-149
• /
• 2011

The adsorption and desorption behaviors of NO and $N_2O$ over two mixed oxide catalysts, AlCoPd (1/1/0.05) and AlCoFe (1/1/2), have been investigated for the lean $NO_x$ trap applications. The catalysts showed good adsorption capabilities for NO and $N_2O$ without needing oxidation step. The adsorption decreased a lot when they are co-adsorbed with oxygen. While NO kept high adsorbability and selectivity with respect to oxygen, those of $N_2O$ decreased sharply. From the TPD results, NO and $N_2O$ are considered to decompose into nitrogen and oxygen in the higher temperature range and the oxygen seems to be strongly attached to the catalysts even at high temperature.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1130-1134
• /
• 2008

Acetic acid has been used as a solvent in the process of manufacturing terephthalic acid. Although the used acetic acid has been mainly separated and recovered through the distillation process, adsorption process can be applied to recover a small amount of acetic acid remaining in the stream after the distillation process. In this study, activated carbon was selected as an adsorbent for acetic acid and the effects of temperature and acid treatment on adsorption capacity were investigated. The adsorption capacities of activated carbon for acetic acid were 0.176 mmol/g at 303 K and 0.118 mmol/g at 343 K, respectively. Adsorption capacity decreased with increasing temperature. The acid treatment of the activated carbon induced the increase in adsorption capacity, which was ascribed to increase in surface functional groups such as phenolic hydroxyl groups and carboxilic acid groups on the carbon surface. In the results of acetic acid desorption, 89% of adsorbed acetic acid was desorbed from activated carbon.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.497-504
• /
• 2009

The characteristic changes in weight, moisture content, and dimension at the early adsorptiondesorption stage of PEG-treated Korean pine (Pinus koraiensis), Japanese larch (Larix kaempferi), mongolian oak (Quercus mongolica) and sargent cherry (Prunus sargentii) woods were investigated. The wood samples were treated with PEG 1000, 2000 and 4000, and conditioned at the relative 98%, 65% and 20% for humidities of one week. The weight of Korean pine, Japanese larch and sargent cherry woods treated with PEG 1000 and 2000 during the adsorption-desorption was significantly changed, but mongolian oak was slightly changed. Moisture content was highly Moisture content was highly fluctuated by the change of relative humidity in the three species except oak wood. Although the weight of PEG-treated wood; however, changes in dimension could be prevented by PEG treatment in all species tested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.106-106
• /
• 2019

많은 도심의 하천들은 오염물질의 유입에 취약하다. 최근 신소재 공학 등 첨단산업이 발전하게 되면서 유해화학물질의 유입문제는 더욱 대두되고 있으며, 실제로 최근 유해화학물질 유입사고 발생건수가 늘어나고 있다. 특히 국내 취수량의 90%는 지표수에서 취수하고 있어, 하천오염사고는 직접적인 피해로 이어지게 된다. 따라서 이러한 사고에 대응하기 위하여 수환경에 유입된 유해물질의 거동 매커니즘을 반영한 수질해석이 필요하다. 수체 내에 유입된 유해화학물질은 기본적으로 흐름에 따른 이송 확산을 하며 흡 탈착, 휘발, 침전 부유, 생화학 반응과 같은 다양한 반응과 함께 혼합거동을 한다. 특히 소수성물질의 경우 용해된 상태뿐만 아니라, 유사에 흡착된 상태로 수체에 존재하게 된다. 결국 유해화학물질의 거동을 해석하기 위해서는 유체의 흐름 해석뿐만 아니라 수체에 존재하는 유사의 이송 또한 해석해야한다. 본 연구에서는 흐름해석을 위하여 서울대에서 개발한 흐름모형(HDM-2D)을 사용하였으며, 부유사 거동모의를 위해 부유사거동모형(STM-2D)을 개발하였다. 또한 유해화학물질의 거동모의를 위해 서울대에서 개발한 수질모형(CTM-2D)에 생성/소멸항을 추가하였으며 흐름모형과 부유사모형과의 연계를 통해 유해화학물질의 혼합거동 수치모형을 개발하였다. 각 반응항(흡 탈착, 휘발, 침전 부유, 생화학 반응)을 수치모형에 반영 시에는 보통 두 계(물-토양, 물-공기) 사이의 선형 물질교환으로 이해된다. 따라서 물질의 각 반응 별 평형농도와 물질교환속도계수를 추정식을 통해 산정하여 사용하게 된다. 하지만 각 기작이 반영유무에 따라 계산시간 및 필요입력변수가 늘어나게 되므로, 유해화학물질 유입사고와 같은 빠른 대처가 필요한 경우 각 반응 텀의 유의성을 판단하여 모형에 반영여부를 결정을 통해 경제적인 모의를 할 수 있어야 한다. 이에 따라 본 연구에서는 개발된 모형의 각 매개변수들의 민감도를 분석하고, 흐름조건 및 물질의 특성에 따른 반응항의 유의성을 판단하였다. 본 연구에서는 개발된 모형(부유사거동모형, 유해화학물질의 혼합거동모형)은 해석해 및 현장 데이터와 비교검증을 통해 개발을 완료하였으며, 각 반응항의 민감도 분석을 통해 매개변수의 임계값을 결정하였다.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.2
• /
• pp.92-98
• /
• 2004

The adsorption and desorption of Pb, Cd, Co, Zn, Cr, Co, Ni, and Mo on the waste Undaria sp. were studied. Except for Pb. the mono adsorption rate for all heavy metals were lower than that of the heavy metals mixed. However, the adsorption capacity of the heavy metals by 1g of biosorption, in mixed heavy metals increased According to FT-IR analysis of the biosorbent after heavy metal biosorption, the replacement of the functional group by the heavy metals ions could be confirmed and the inverted peaks became larger after heavy metals adsorption. The adsorption equilibrium of heavy metals was reached in about 1 hour. The equilibrium parameters were determined based on Langmuir and Freundlich isotherms. The affinity of metals on the biosorbent decreased in the following order: Pb>Cu>Cr>Cd>Co. The desorption rate decreased in the following sequence: NTA>$H_2SO_4$>HCl>EDTA. The desorption rate of heavy metals by NTA increased with increase in the concentration from 0.1 to 0.3% but the desorption rate became constant beyond 0.3%. Therefore, it represented that desorption rate of heavy metals was suitable under optimized condition ($30^{\circ}C$, pH 2 and 0.3% NTA solution) and was fast with 80% or more the uptake occurring within 10 min of contact time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.2
• /
• pp.115-121
• /
• 1986

This experiment was conducted to examined the effects of the physico-chemical and mineral-logical properties of paddy soil on the desorption of $Cs^{137}$ from radionuclide, $Cs^{137}$ absorbed soils. 1. Adsorption of $Cs^{137}$ by paddy soil was very much and exchangeable fraction of $Cs^{137}$ extracted by ammonium acetate was very high compared to the water soluble fraction. Exchangeable fraction of $Cs^{137}$ in paddy soil decreased with the increase of potassium application and increased proportionally with the increase of $Cs^{137}$ treatment. 2. The distribution of several forms of $Cs^{137}$ in soils depend on the soil type. Average-distribution rates of water soluble, exchangeable and non-exchangeable fractions of $Cs^{137}$ in soils were 5.9%, 17.1% and 77.0%, respectively. 3. The desorption of $Cs^{137}$ from adsorbed soils decreased with increase of pH and exchangeable cations of the soils, but it increased as organic matter and clay content increase in soil. 4. Non-exchangeable adsorption of $Cs^{137}$ was high in the soils of which both Illite and Vermiculite were dominant.

• Journal of Environmental Science International
• /
• v.17 no.5
• /
• pp.493-500
• /
• 2008

This paper describes the adsorption/desorpton efficiency of a modified activated carbon by irradiated microwave to treat toluene. By employing microwave energy, the regeneration time was considerably shortened compared with conventional thermal heating regeneration. New adsorbent called ACB (Activated Carbon-Bentonite) was prepared from powder activated carbon with mixing bentonite as a binder. Specific surface area, average pore size and total pore volume of ACB were calculated from the nitrogen adsorption/desorption isotherm. The surface of ACB was characterized with scanning electron microscope(SEM). The results showed that the specific surface area, total pore volume, average pore size of ABC was not influenced by regenerating cycle with microwave irradiation. Toluene was adsorbed onto ACB which desorbed by MW irradiation. Absorption capacity of ACB was 0.117 $g_{toluene}/g_{ACB}$. Desorption efficiency of toluene increased as higher microwave output was applied.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.286-288
• /
• 2011

활성탄소섬유의 유해 미생물의 번식 억제력을 조사하기 위해 한천베지배양법을 이용하였다. 전이금속으로 코팅된 활성탄소섬유는 일부 유해 미생물에서 번식억제력이 나타났으며, 유해 미생물은 인간의 피부 부종을 야기시키는 미생물인 candida albicans이었다. 그리고 코팅 활성탄소섬유의 흡 탈착력은 코팅되지 않은 활성탄소섬유보다 약 5% 내외로 감소함을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.206.1-206.1
• /
• 2010

폐기물 등을 열분해 가스화한 합성가스로부터 효과적으로 고순도의 수소를 회수하기 위하여 WGS(수성가스전환반응) 및 $CO_2$ 회수 PSA 공정을 적용하였다. 벤치스케일 열교환형 WGS반응기를 개발하여 기존 단열방식에 비하여 단순화한 반응시스템을 구축하였으며 출구 CO농도 4%대를 달성하였다. 또한 3베드로 구성된 벤치스케일의 $CO_2$ PSA운전을 수행한 결과, 2.5barg 흡착 및 진공재생단계를 적용하여 회수되는 $CO_2$의 농도가 95%이상, 회수율 80%이상을 기록하는 효율적인 $CO_2$ 회수공정을 개발하였다. 한편, 흡탈착 모사프로그램인 ADSIM을 통해서도 실험과 비교적 일치한 결과를 얻을 수 있었는데 향후 스케일업 설계자료 확보시 유용할 것으로 판단되었다.