• Korean Chemical Engineering Research
• /
• v.55 no.4
• /
• pp.514-519
• /
• 2017

Adsorption characteristics of acid green 27 dye using activated carbon were investigated as function of adsorbent dose, pH, initial concentration, contact time and temperature. Freundlich isotherm explained adsorption of acid green 27 dye very well and Freundlich separation factors (1/n=0.293~0.387) were found that this process could be employed as effective treatment method. Kinetic studies showed that the kinetic data were well described by the pseudo second-order kinetic model. Pseudo second rate constant ($k_2$) decreased with the increase in initial acid green 27 concentration. Activation energy (10.457 kJ/mol) and enthalpy (79.946 kJ/mol) indicated that adsorption process was physisorption and endothermic. Since Gibbs free energy decreased with increasing temperature, spontaneity of adsorption reaction increased with increasing temperature in the temperature range of 298 K~318 K.

• Korean Journal of Environmental Agriculture
• /
• v.11 no.2
• /
• pp.101-108
• /
• 1992

In order to illustrate adsorption phenomena of herbicides(alachlor and paraquat) on soils, absorption equation of herbicides and the relationships between soil properties and adsorption constants were investigated with 22 soils. The results were as follows : 1. The shaking time for approaching equillibrium reaction of herbicides(alachlor and paraquat) with woils were about 30 minutes for paraquat and 4 hours for alachlor, respectively. 2. The distribution coefficients of alachlor were inbetween 0.81-33.83 in 5 ppm and 0.09-15.52 in 50 ppm, respectively. 3. The adsorption of alachlor was positively correlated with organic matter and paraquat was with clay content of soils. 4. Both paraquat and alachlor were highly adsorbed in Chunpo series soil containing low contents of organic matter and clay on account of different mechanism from other soils, 5. Freundlich's adsorption constant(K) was greater than distribution coefficient(Kd), and the differences between K and Kd's were to be increased with increasing equillibrium concentrations.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.590-598
• /
• 2016

In this study, the adsorption behavior from aqueous solution as well as kinetic and thermodynamic parameters of Acid Black 1 were investigated through batch reaction using coconut shell based granular steam activated carbon. The effects of various adsorption parameters such as pH, initial concentration, contact time, temperature were studied. To confirm the effect of pH, pHpzc measurements were analyzed followed by measuring removal efficiencies of Acid Black 1 at the pH range from 3 to 11. Experimental equilibrium adsorption data were fitted using Langmuir, Freundlich, Temkin and Dubinin-Radushkevich adsorption isotherm. The conformity of adsorption reaction for pseudo first and second order model were evaluated through kinetic analysis. Values of enthalpy change and activation energy were also investigated through thermodynamic analysis and it was confirmed that the adsorption process was endothermic. The spontaneity of adsorption process was evaluated using the values of entropy and Gibbs free energy changes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.2
• /
• pp.17-26
• /
• 2014

In this study, the adsorption efficiency of mixed heavy metals from an aqueous solution was examined using bentonite. The physical and chemical properties of bentonite was analyzed via scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR), Further, heavy metal adsorption was characterized using Freundlich and Langmuir equations. Equilibrium adsorption data were fitted well to the Langmuir model for bentonite. The adsorption uptake of heavy metals was high and followed the order $Pb^{2+}$ > $Cu^{2+}$ > $Cd^{2+}$ > $$Zn^{2+}{\sim_=}Ni^{2+}$$. The results also showed that adsorption uptake slightly increased as increasing pH from 6 to 10. The bentonite surface was observed viay SEM and FT-IR; Si-O and Si-O-Al were found to be the main functional groups by FT-IR analysis. From these results, the adsorption mechanisms of heavy metal were not only surface adsorption and ion exchange, but also surface precipitation. Thus, bentonite could be a useful adsorbent for treating heavy metal in aqueous solution.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.399-403
• /
• 1999

Biosorption of Pb and Cr to Sargassum sagamianum was evaluated in the various conditions. An adsorption equilibrium was reached in about 15 min. for Pb and Cr. The uptake capacity was 224.5 mg Pb/g biomass and 77.5 mg Cr/g biomass, respectively. The adsorption parameters for Pb and Cr were determined according to Langmuir and Freundlich model. Biosorption of Pb and Cr was increased with an increase in pH value. Pb and Cr adsorbed by S. sagamianum could be recovered by desorption process with 0.1M HCl, 0.1M $HNO_3$ and 0.1M EDTA and the efficiency of Pb desorption was above $90\%$, whereas the efficiency of Cr desorption was below $51\%$.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.11
• /
• pp.31-37
• /
• 2011

This study investigated on the adsorption and photocatalysis of Reactive Black 5(RB5) by the hydroxyapatite(HAP)/Titanium dioxide($TiO_{2}$) media. The adsorption of RB5 on $TiO_{2}$, HAP and $TiO_{2}$/HAP was investigated during a series of batch adsorption experiments. The amounts adsorbed at equilibrium were measured. Langmuir and Freundlich isotherm models were tested for their applicability. The result of equilibrium studies of $TiO_{2}$, HAP and $TiO_{2}$/HAP adsorbent were found to follow Langmuir isotherm model. The adsorbed amounts(Qmax) were found to be 5.28mg/g on single $TiO_{2}$, 12.45mg/g on single HAP and 9.03mg/g on $TiO_{2}$/HAP, respectively. The experimental data were analysed using the pseudo-first-order adsorption and photocatalysis kinetic models. According to these models, RB5 degradation by $TiO_{2}$/HAP was affected by interaction effect of photocatalysis and adsorption.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.994-1001
• /
• 2008

Freundlich isothermal adsorption parameters, applicable to such biofilter-model as process-lumping model(Lim's model), for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost were obtained and were compared each other, assuming that adsorbents are enclosed by water layer, in order to construct robust process-lumping biofilter model effective for wide-range of hydrophilic volatile organic compounds(VOC). In this investigation 0.04, 0.08, 0.12, 0.16, 0.2, 0.4, 0.8 and 1.0ml of ethanol were added to three kinds of adsorbent-media and were placed at $30^{\circ}{\cdots}$ under the wet condition of the media, which was the same as biofilter operating condition, until the adsorption reached the condition of equilibrium before each adsorbed amount of ethanol was obtained. Then adsorption capacity parameters(K) and adsorption exponents of Freundlich adsorption isotherm equation, which simulates the adsorbed amount of ethanol equilibrated with the ethanol concentration of the condensed water in the pore of the media, were constructed for sterilized granular activated carbon(GAC), sterilized compost and sterilized equal volume mixture of GAC and compost as (0.7566 and $5.070{\times}10^{-7}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.7566}$), (0.8827 and $1.000{\times}10^{-8}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.8827}$) and (0.5688 and $5.243{\times}10^{-6}mg-ethanol/mgmedia/(mg-ethanol/m^3)^{0.5688}$), respectively. These Freundlich isothermal adsorption parameters were applicable to the adsorption characteristics of biofilter media enclosed with bio-layer. The order of magnitude of the ratio of ethanol-air/water partition coefficient and toluene-air/water partition coefficient was almost consistent to that of ethanol-adsorbed amounts in this experiment with compost and in the investigation of Delhomenie et al. on toluene-adsorption to wet compost.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.3
• /
• pp.135-142
• /
• 1993

탄소강 및 Nickel 음극에서 아연의 전착특성에 대하여 조사하였다. 황산아연 및 염화아연용액속에서 회전전극을 사용하여 실험한 결과 아연의 평형전위 이전에서 전착이 일어나는 소위 Underpotential Deposition 현상이 관찰되었다. 또한 이렇게 전착이 일어난 아연층은 평형상태에서 일정한 두께로 제한되는데 전착전압에 따른 전착층의 전하량을 계산한 결과 다층흡착구조과 유사한 경향을 나타내었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.162-167
• /
• 2003

최근 수년간 유선 시뮬레이션은 연산 속도의 효율성과 수치 분산으로 인한 오차를 감소시킬 수 있는 장점으로 인해 많은 연구가 이루어졌으며 오염물의 거동을 모사 하는데 많이 사용되고 있다. 이 연구에서는 유선 시뮬레이션의 기법을 이용하여 1차의 비평형 흡착을 고려한 오염물 거동 수치 모사를 수행하였다. 1차의 비평형 흡착의 경우 흡착 계수에 따라 오염물의 이동 속도가 민감하게 반응하는 것을 확인할 수 있었고 흡착 계수의 값이 커질수록 오염의 전파 지연 효과가 크게 나타남을 알 수 있었다. 1차의 비평형 흡착의 경우에 평형 흡착과는 달리 오염이 진행되면서 오염물의 농도를 감소시키는 영향을 나타내었으며 이로 인하여 오염물이 더 이상 진행하지 못하는 제로라인을 형성하게 하였다. 이 제로라인은 흡착 계수의 값이 클수록 탈착 계수의 값이 작을수록 오염원에 가깝게 형성되었다.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.2
• /
• pp.91-96
• /
• 1994

중.저준위 방사성 폐기물의 대표적인 핵종인 137Cs, 90Sr에 대한 캐올리나이트의 흡착특성을 수용액의 이온강도와 pH의 영양하에서 알아보았다. 흡착실험은 회분식으로 하였고, 사용한 수용액은 NaCl, CaCl2, MgSO4, KCL 각각을 10-1, 10-2, 10-3, 10-4 mole/$\ell$로 하였다. 수용액광물 평형상태의 pH를 4.5, 7.0, 10.5로 조절하였다. 실험결과 캐올리나이트의 Cs, Sr 흡착은 이온강도와 pH에 상당한 영향을 받으며, Sr 흡차에 양이온들의 경쟁은 Ca2+ Mg2+>K+>Na+ 순을 보이고, Cs의 경우에는 K+>Ca2+ Mg2+>Na+의 순을 보인다. 이는 수용액상에서 이온들의 수호에너지와 관련되며, 광물입자와 이온들의 물구조변환특성에 의해 설명된다. Cs과 Sr 사이에 흡착우선성은 산성 내지 약알카리에서는 Cs이 Sr보다 흡착이 잘 되나, 강알칼리성 환경에서는 Sr이 Cs보다 흡착이 잘 되는 pH 의존성을 보였다. 수용액의 pH가 증가함에 따라 핵종의 흡착량이 증가하는데, 이는 캐올리나이트의 흡착자리인 실라놀과 알루미놀에 의한 제타전위가 pH에 의존함과 잘 일치한다.