• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.941-946
• /
• 2009

Two types of synthetic zeolites, commercially used (Z-WK) and synthesized by coal fly ash (Z-C1), and raw coal fly ash(F-C1) were examined for its kinetics and adsorption capacities of cobalt. Experimental data are fitted with kinetic models, Lagergen $1^{st}$ and $2^{nd}$ order models, and four types of adsorption isotherm models, Langmuir, Freundlich, Redlich-Peterson, and Koble-Corrigan. Synthesized zeolite (Z-C1) which had 1.51 of Si/Al ratio was synthesized by raw coal fly ash from a thermal power plant. Adsorption capacities with three types of adsorbents, Z-WK, Z-C1, and F-C1, were in the order of Z-C1 (94.15 mg/g) > F-C1 (92.94 mg/g) > Z-WK (88.56mg/g). The adsorption kinetics of Z-WK and Z-C1 with cobalt could be accurately described by a pseudo-second-order rate equation. The adsorption isotherms of Z-WK and Z-C1 with cobalt were well fitted by the Langmuir and Redlich-Peterson equation. Z-C1 will be used to remove cobalt in water as a more efficient absorbent.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.857-861
• /
• 2010

Recently photochemical smog has become a serious urban air pollution. And VOC is the major pollutant for it. With the advance of industrialization and urbanization, MSWI fly ash and sewage sludge and melting slag were generated. It is necessary to de-toxificate ashes, because they contain many toxic constituents and probably lead to contaminate the environment. The objective of this research was to prepare multi-functional brick which is able to remove VOCs in ambient air. The bricks were made of MSWI fly ash, sewage sludge and slag. The benzene adsorption experiment by brick was acted to evaluate its adsorptivity. And also photocatalyst material was coated to enhance its adsorptivity and the endurance on the brick. According to the result, the benzene showed 74~96%. The removal efficiency was increased and the breakpoint time was lengthened by coating a brick.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.59-67
• /
• 2014

The amount of the contaminants that can be adsorbed on the drain was evaluated for the effective remediation of the contaminated soil, and the contaminants adsorptivity of the drain was evaluated by comparing the isothermal adsorption model after carrying out the contaminants adsorption test of the reactants coated on the surface of the drain. The reactant used in the experiment is a natural zeolite, and the contaminants are copper, lead and cadmium. The results that Freundlich and Langmuir adsorption isotherm model are compared to the adsorption amount according to the change of the initial concentration by the contaminants. As a result of the component analysis, because Si, Al and O are contained approximately 28%, 11% and 48%, respectively, it is identified that the material coated on the surface of the drain is the component of the zeolite which is the reactant for the adsorption of the heavy-metal (Cu, Pb, Cd) contaminants. The heavy-metal adsorption kinetic of the zeolite which is the reactant was decreased in order of lead, copper and cadmium. The important factor of the performance evaluation of the adsorbent is the reaction rate, and if zeolite is used as the reactant in the relationship between the maximum amount of adsorption and reaction rate, it can be utilized as the design factor that determine the removal order of the complex heavy-metal. In other words, because the maximum adsorption quantity of lead is smaller compared to copper but the reaction rate is relatively fast, it can be primarily removed, and copper can be removed after removing the lead. It was analyzed that Cadmium can be finally removed after that other heavy-metal is removed.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.2
• /
• pp.1-11
• /
• 2008

Phenanthrene uptake by surfactant sorbed on activated carbon was investigated to recycle of surfactant in washed solution for contaminated soil. The partitioning of phenanthrene to the activated carbon coating with Triton X-100 as a surfactant was also evaluated by a mathematical model. Phenanthrene-contaminated soil (200 mg/kg) was washed in 10 g/L of surfactant solution. Washed phenanthrene in solution was separated by various particle loadings of granular activated carbon through a mode of selective adsorption. Removal of phenanthrene was 99.3%, and surfactant recovery was 88.9% by 2.5 g/L of granular activated carbon, respectively. Phenanthrene uptake by activated carbon was greater than that of phenanthrene calculated by a standard model for a system with one partitioning component. This is accounted for enhanced surface solubilization by hemi-micelles adsorbed onto granular activated carbon. The effectiveness factor is greater than 1 and molar ratio of solubilization to sorbed surfactant is higher than that of liquid surfactant. Results suggest that separation of contaminants and surfactants by activated carbon through washing process in soil is much effective than that of calculated in a theoretical model.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.226-227
• /
• 2018

Recently, as the interest of the government and the public on energy saving has increased, the airtightness of buildings has been improved to improve the insulation performance of buildings. However, indoor air pollution due to increase of pollution source in indoor space and lack of ventilation is increasing and interest in indoor air quality is increasing. In 2003, the Ministry of Environment enacted and promulgated the Act on Indoor Air Quality Control in Multi-use Facilities. Radon is a naturally occurring radioactive inert gas with colorless, tasteless and odorless nature. The concentration is high in a room where radon can not escape. Although lononggas is naturally occurring, it is not interested in living environment, but it is easily inhaled through human body through respiration and causes lung cancer in long-term exposure. Therefore, this study intends to carry out an experiment for the reduction of radon gas, which is the first carcinogen in indoor air pollution sources.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.105-116
• /
• 2019

Oil adsorption during hair or body washing is responsible for the hair conditioning. In this study, we established a method to extract oil from a substrate, and to determine amount of adsorbed oil upon substrate using a conventional absorption spectroscopy. We controlled the mole fraction of a surfactant in a mixture of anionic and amphoteric surfactants because that it induces the coacervate that regulates amount of adsorbed oil through the alteration of oil viscosity. Based on this, we established the optimized condition for adsorption and extraction for oil. UV absorbance were employed to estimate the amount of adsorbed oil using optical absorbance after extraction via adsorption. The estimation was confirmed by comparing with a mass analysis in HPLC and an adhesive energy in AFM. It has been proved that this method can be applied to all cases of oil adsorption from the results with various cationic polymers and a complex system of the polymers which regulate the oil adsorption.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.46
• /
• pp.82-91
• /
• 2008

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.5-8
• /
• 2006

수소 station에서 수소분리정제를 위한 compact형 PSA 공정 설계를 위하여 활성탄으로 충진된 dual bed의 흡착동특성을 연구하였다. 기존 PSA 공정의 흡착탑이 차지하는 시스템의 공간을 줄이기 위하여 하나의 흡착탑 안에 다른 흡착탑을 넣어 흡착탑이 차지하는 공간을 최소화하고, 흡착탑 간의 열교환을 효과적으로 할 수 있도록 고안하였다. 수소 혼합물에 대한 dual bed에서의 흡착, 탈착 실험 실시하였으며, 시간에 따른 농도와 온도의 변화를 측정하였다. 수소 혼합물로는 $H_2/CO/CH_4/CO_2$ (69:2:3:26vol.%)를 사용하였으며, 흡착유량은 7LPM, 흡착압력은 9atm 조건에서 운전하였다. Inner bed와 outer bed의 수소 농도 파과곡선의 형태에 있어 차이를 보였으며, 이는 각 탑에서 열교환 효과로 인한 내부 온도 차이에 기인하여 발생하였다.

• Clean Technology
• /
• v.19 no.2
• /
• pp.134-139
• /
• 2013

VOCs such as formaldehyde and benzene in a control chamber were adsorbed onto gypsum incorporating oyster shell powder, which was solidified and dried. VOC was first exposed in air and then gypsum mortar was placed in the chamber for 180 min for adsorption. The mortar was prepared with 0, 10, 30, and 50% of oyster shell powder. Two initial concentrations of VOCs including formaldehyde were $27.7{\sim}28.5mg/m^3$ or $175{\sim}150{\mu}g/m^3$. We found out that the initial concentrations did not seem to make any difference in adsorption performance but higher oyster content strongly led to higher adsorption. We used a convection-diffusion-adsorption model to compare the experiment. The model which considers diffusion coefficients of adsorbates and affinity of the adsorbents well represented the experimental data with a fair agreement.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.700-705
• /
• 2012

The present study is to explore the possibility of utilizing loess and fly ash as well as activated carbon for the adsorptive removal of T-N and T-P in water. Here, we investigated adsorption efficiency and Freundlich constants k and 1/n of each adsorbent. It was found that fly ash has not adsorptive capability for both T-N and T-P in water. Adsorption of T-N from water by loess has not occurred, but showed that adsorption efficiency for T-P reached approximately 57.5% at equilibrium time of 24 hr and room temperature. Activated carbon was shown to be an effective adsorbent for adsorption of T-N from water. Freundlich constant 1/n value of activated carbon represented that adsorptive capability of activated carbon is almost equivalent to loess.