• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.54-58
• /
• 2015

인간이 생활하는데 필요한 전기를 생산하는 시설 중 하나인 화력발전소의 발전수차를 냉각시키기 위하여 많은 양의 냉각수를 바다에서 취수하게 되는데, 이 과정 중에서도 특히 흡입수조(Intake Basin)에서 흡입펌프(Suction Pump)를 통과하는 단계가 매우 중요하다. 흡입수조의 형상과 펌프운용조건 등에 의하여 흡입구(Bell Mouth)에 접근하는 유동이 비대칭일 경우 흡입구 주변에서 선회류가 발생하거나 유속분포가 비균일?비대칭이 되기 쉽다. 그러면 선회류가 더욱 악화되어 볼텍스(Vortex)로 발달되면 취수 펌프에 악영향을 준다. 또한 볼텍스의 발생은 흡입수조의 형상뿐만이 아니라 낮은 수위일 경우 수면과 흡입구의 거리가 짧아지면서 자유수면볼텍스 또는 수중볼텍스가 발생할 확률이 높아지게 된다. 본 연구에서 수리모형시험을 통하여 펌프 조합 및 수위 변화에 따른 볼텍스의 발생여부를 파악하고 볼텍스 저감장치를 고안하였다.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.327-334
• /
• 1994

실험실 수조에서 조석 및 조류를 발생시키기 위해서는 수조내에 흐름의 분출부와 흡입부를 적절히 설치해야 한다. 분기관은 관수로 측면에 설치된 다수의 구멍을 통하여 관내ㆍ외 압력차에 의해 물을 분출 또는 흡입하는 장치이다. 수조 폭에 따라 균등한 단위폭당 유량을 발생시키기 위해서는 각 구멍의 크기를 적절히 결정해야 하며 이를 위해서는 공급류량, 공급수두, 수두손실, 구멍에서의 분출 및 흡입류량 등의 수리특성을 파악하여야 한다. 본 연구에서는 에너지 방정식과 연속방정식으로부터 비롯되는 비선형 연립방정식을 구성하고 Newton 해법을 적용하여 분출 및 흡입분기관의 수리특성을 파악하였다. 아울러, 자동제어 밸브가 부착된 분기관이 수조폭에 걸쳐 일정한 유량을 유지해야하는 조석수조에 효과적으로 사용될 수 있음을 확인하였다.

• 플랜트 저널
• /
• 제3권4호
• /
• pp.18-25
• /
• 2007

• 청정기술
• /
• 제10권2호
• /
• pp.89-100
• /
• 2004

도장부스 수조 내에 부유되는 도장 슬러지의 효율적인 분리를 위한 수조 형상 및 skimmer 설치에 대한 설계를 최적화하였다. VOF 모델을 사용하여 수조 내 도장 슬러지-물-공기 혼합물의 유동형태에 대한 해석을 수행하였고, 해석된 결과를 바탕으로, 수조 내 물로부터 효과적인 슬러지 분리를 위한 도장 부스 수조 내 흡입관, 격판 및 슬러지 유입구의 설치에 대한 최적 설계 기준을 제시하였다. 더 나아가, skimmer 가 수조 내 물에 잠기는 설치조건에 대한 최적화를 통하여 슬러지 흡입 시 공기 혼입 및 압력손실을 최소화 하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.593-597
• /
• 2005

In order to study the characteristics of the subsurface vortex the flow fields of the three pump sump models were analysed by the numerical simulation. The calculation results show that there are circulation flows in the pump sump model and maximum vorticity strength which make iso-surface from the wall to the pump inlet could be used for predicting the subsurface vortex generation. Also, the flow field for the sump model with anti-vortex devices simulated and the results shows that there is no vorticity value which make iso-surface from the sump wall to the pump inlet.

• 한국유체기계학회 논문집
• /
• 제5권3호
• /
• pp.33-39
• /
• 2002

The head-capacity corves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and with no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. However, various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall, and back-wall due to different clearances from back-wall to vortical intake pipe. Moreover, the locations and patterns of the various types of vortices that were found in the examinations are discussed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.95-101
• /
• 2002

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a sin91e pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents. Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found within a sump of pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface due to different clearances from back-wall to vertical intake pipe with bell mouse and without. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.209-215
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the Pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.563-569
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.220-228
• /
• 2003