• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.468-475
• /
• 2016

The purpose of this study is to investigate the acoustic problems of the conventional heat recovery ventilator and to suggest the methods of noise reduction from a heat recovery ventilator according to the installed location. The noise level, in this study, was measured and discussed as the parameters of size, wind volume and sound absorbing duct length for a heat recovery ventilator based on domestic and international related standards. It is found, as a result, that almost all of noise levels from the small and medium heat recovery ventilators without the sound absorbing duct in the anechoic chamber were higher than the noise standard value of 50 dB(A) regardless of the wind volume, and the noise levels went down when a sound absorbing duct was installed. In addition, the sound pressure level relative to frequency bands according to the length of sound absorbing duct was generally decreased, as the length of sound absorbing duct in the small and medium heat recovery ventilators was big, and the sound pressure level was generally increased, as the wind volume was great.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1990.10a
• /
• pp.47-50
• /
• 1990

종래에는 공조덕트의 소음 감소를 위하여 주로 흡음재료를 사용하여 왔다. 그러나 이러한 흡음재료를 이용한 소음감소대책은 500HZ 이상의 고주파 영 역에서는 효과가 있으나 500HZ 이하의 저주파 영역에서는 효과가 적다. 이 러한 500HZ이하의 저주파 소음은 각종 구조물의 진동을 야기시켜 정밀작업 이 요구되는 작업환경을 파괴하고, 심지어는 구조물에 손상을 입힐수도 있 다. 또한 이러한 저주파 소음에 노출된 사람의 심리를 불안하게 하여 일의 효율을 떨어뜨릴 뿐만 아니라 청력장애를 일으키기도 한다. 또한 청정환경이 요구되는 곳에서의 소음감소를 위하여 흡음재료를 사용할 경우 흡음재료로 부터 떨어져 나오는 미세분에 의해 청정환경의 보존이 어려워진다. 이러한 흡음재료를 이용한 수동소음제어 대책의 단점을 해결하기 위하여 소음을 그 소음과 동일한 진폭을 갖으며 위상차가 180도인 인위적인 음파로 상쇠시키 는 능동소음제어대책의 개발이 요구되어 왔다. 본 논문은 덕트 또는 이와 유 사한 음향환경내에서의 적응필터기법(adaptive filtering technique)을 이용한 능동소음제어방법의 개발, 실제구현 및 성능평가에 관한 것으로서, 특히 다 수의 에러 마이크로폰과 다수의 소음제어용 스피커를 사용하여 제어계통의 가관측성(Observability)및 가제어성(Controllability)을 향상시켜 평면파로 전 달되는 소음의 감소를 증대시킬수 있을 뿐만 아니라 고차모드(Higher-order mode)로 전달되는 소음의 제어도 가능케하는 능동소음제어 방법에 관하여 논하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.305-313
• /
• 2017

In this paper, sound absorption of thin elastic plates installed in a rigid duct is discussed using an analytic method. The number of plates can be one or two, and each plate might have micro-perforation. Vibration of the plates and sound pressure fields inside the duct and air cavity are expressed in terms of an infinite series of modal functions. Under the plane wave assumption, a low frequency approximation is derived by including the first few plate modes. It is found that the sound absorption coefficient of the plates without micro-perforation shows sharp peaks at resonance frequencies, and due to the interaction between the plates and air cavity, the resonance frequencies move as the cavity depth changes. For the case of micro-perforated plates, it is found that the sound absorption is mainly affected by the perforation ratio. When the perforation ratio is order of few percent, the sound absorption is almost independent of plate vibration.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.892-897
• /
• 2000

In this paper, experimental methods to find acoustic characteristics of acoustically treated air-conditioning duct system are proposed. Existing methods to analyze acoustic properties of duct with absorbent material have dilemma which has to assume the wave in duct to be a plane wave. Under this assumption. applicable frequency limitation makes accurate analysis of practical air-conditioning system impossible. In order to analyze the properties of in-lined treated absorbent with high degree of accuracy, in this experiments the range of exciting frequency of sound source is broadband, which means that source speaker excited higher mode of in-duct sound field. Also, to define the relations of air cavity to the acoustic characteristics, acoustic experiments on ducts with air cavity of different depth are operated. In conclusion, air-cavity makes the absorbing ability of duct improved in low frequency range. Due to the interactions between the air cavity depth and the depth of absorbents, according to depth of cavity, the magnitude of absorption coefficients vs frequencies in specific range is changed. In lower frequency range, the absorption of sound energy by air cavity is more dominant than by absorbent itself, in higher range, the inversion is true.

• Journal of the KSME
• /
• v.32 no.3
• /
• pp.262-267
• /
• 1992

이 글은 평면파 소음의 감소 성능을 향상시키고 고차모드로 전달되는 소음의 감소도 가능한 공 조덕트용 능동소음제어장치의 개발에 대하여 논하였으며, 실험결과 개발된 능동소음제어장치의 성능 및 안전성이 기 상품화되어 있는 외국의 제품에 비해 손색없이 뛰어남을 발견하였다. 능 동소음제어장치는 앞으로 고도의 청정, 정숙환경이 요구되는 반도체공장, 방송국 등에 폭넓은 적용이 기대되며, 기존의 흡음처리 대책보다 설치, 보수 및 유지가 간편하다. 특히 덕트내 주요 소음원인 블로워의 소음특성이 저주파 부근에 에너지가 집중되어 있음을 고려할 때 능동소음제 어기술의 공조덕트내 소음제어에의 적용은 매우 효과적이며 경제적일 것으로 기대된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.12
• /
• pp.897-901
• /
• 2010

A silencer has been widely used for the purpose of suppressing the noises propagated from duct of air conditioning system. The absorption type silencer is usually applied to reduce the noise with high frequency bandwidth. On the order hand, the resonance type silencer is applied to reduce the noise with low-middle frequency bandwidth. The insertion loss of silencer is measured in the reverberation room. The cut-off frequency of reverberation room is 100 Hz. The insertion loss of absorption type silencer is more larger than that for resonance type silencer regardless of changing the flow velocity.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.181-187
• /
• 2018

In this paper, sound absorption of micro-perforated elastic plates installed in an impedance tube of a circular cross-section is discussed using an analytic method. Vibration of the plates and sound pressure fields inside the duct are expressed in terms of an infinite series of modal functions, where modal functions in the radial direction is given in terms of the Bessel functions. Under the plane wave assumption, a low frequency approximation is derived by including the first few plate modes, and the sound absorption coefficient is given in terms of an equivalent impedance of a single surface. The sound absorption coefficient using the proposed formula is in excellent agreement with the result by the FEM (Finite Element Method), and shows dips and peaks at the natural frequencies of the plate. When the perforation ratio is very small, the sound absorption coefficient is dominated by the vibration effect. However, when the perforation ratio reaches a certain value, the sound absorption is mainly governed by the rigid MPP (Micro-Perforated Plate), while the vibration effect becomes very small.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1209-1211
• /
• 2006

This paper introduces an experimental study for the noise reduction of a ventilating fan system. For the purpose of noise reduction, conventionally an absorptive duct silencer filled with a glass fiber has been utilized. However, a glass fiber has some disadvantages like hygiene and secondary pollution problems. In order to overcome these problems, in this paper, a perforated duct silencer has been applied to the ventilating fan system. For the designing of a perforated duct silencer, the transmission losses for various perforated panel systems are measured and compared with its noise reduction performance.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.2E
• /
• pp.88-95
• /
• 1993

공조덕트계에 소음 챔버를 설치하여 발생되는 음향투과손실을 유한요소법에 의하여 산출하는 방법을 검토하였다. 여기서는 음장내의 네트음향인텐시티를 입사파와 반사파의 인텐시티로 분리하므로서 투과손실의 산출을 가능하게 하였다. 산출방법의 타당성을 검증하기 위하여 형상과 내부흡음조건이 다른 소음챔버를 대상으로 수치해석과 모형실험을 실시한 결과, 양자는 잘 일치하였다.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.500-505
• /
• 2005

This paper introduces an experimental study for the noise characteristics and reduction of a ventilating fan system. For the purpose of noise reduction of it, an absorptive duct silencer filled with a glass fiber has been conventionally utilized. However, a glass fiber has some disadvantages like hygiene and secondary pollution problems. In order to overcome these problems, in this paper, a perforated duct silencer has been applied to the ventilating fan system. For the designing of a perforated duct silencer, the transmission losses for various perforated panel systems are measured and compared with their sound absorption performances.