• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.191-197
• /
• 1988

Sorption properties of corn starch(CS) and Soy protein isolates(SPI) in plastic films packaging were investigates for binary system. The mixture were sealed in plastic films of low density polyethylene(LDPE), oriented polypropylene(OPP) and LDPE/OPP coated film and packaging effect on the changes of moisture sorption during storage at $40^{\circ}C$ were studied. The following results were obtained. The water vapor permeability of material films was $32.6g/m^2/24hrs(below\;g)$ for 0.02mm LDPE film, 14.01g for 0.04mm LDPE film, 7.30g for 0.02mm OPP film, 3.37g for 0.04mm OPP film and 4.869 for 0.02mm LDPE/0.02 mm OPP confine film at $40^{\cire}C$ 90%RH, therefore the OPP film was more effective than LDPE film on the resistance of relative humidity. And the OPP film packaging sealed mixture of food samples was also more elective then LDPE film, having same thickness for increase of water vapor permeability during storage at $40^{\cire}C$. A general increase in sorption rate was found more in SPI than CS in the packaged mixtures.

• Composites Research
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2004

The effect of moisture absorption on the mechanical properties in carbon fiber reinforced composites has been investigated with various moisture environment such as sea water, tap water and distilled water. It also has been studied about the influence of drying of the immersed specimen for a certain period of time on the mechanical properties. As a result, we found that the ratio of moisture absorption mainly depended on the immersion time in the moisture environment and that of the immersed specimen for a certain period of time decreased with the drying time. We also found that tensile strength decreased with the increasing of the ratio of moisture absorption and the tensile strength decreased by moisture absorption recovered up to some extent by drying the specimen.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.162.2-163
• /
• 2003

두부는 특유의 질감으로 우리 민족의 주요부식이 되어온 전통식품으로서 국제적으로 잘 알려져있는 고단백식품이다. 두부의 원료인 대두는 전체단백질의 80∼90%를 차지하는 glycinin과 albumin등의 단백질 성분과 비단백 질소 화합물이 함유되어 있는데 가격이 저렴하면서 영양과 기능성이 우수하여 식육, 낙농제품, 계란단백질이 disulfide 결합, 수소결합 및 소수결합에 의해 응집되어 gel이 된 후 염농도 증가에 의해 침전되거나 산에 의해 등전점 (pH 4.2∼4.6)에서 침전되는 성질을 이용한다. 또한 두부는 80% 이상의 높은 수분함량 때문에 쉽게 변질되는 소지가 많으며 두부의 저장에 많은 한계성을 보이는 식품이기도 한다. 따라서 건조에 의한 식품의 저장은 식품내의 수분을 감소시킴으로써 용질의 상대적 농도를 높혀 식품내의 수분 활성도를 저하시켜 미생물 및 효소에 의한 부패나 변패 및 변질을 방지할 수 있다. 이에 본 연구에서는 두부의 안전저장과 유통을 위하여 열풍건조, 진공건조 및 동결건조에 따라 분말두부를 제조하고 수분흡습특성과 기존 모델식과의 적합성 및 평형수분함량의 예측모델을 구하여 분말두부의 활용성을 높이며 다른 분말식품에도 적용할 수 있는 기초자료를 제공하고자 하였다.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.434-443
• /
• 1997

유리섬유와 에폭시 수지와의 계면전단강도에 미치는 수분흡수, 섬유직경 및 섬유의표면상태 등의 영향을 검토하기 위해서 two fiber fragmentation 시험법을 사용하였다. 그리고 유리섬유/에폭시 수지의 일방향 복합재료에서 수분흡수가 복합재료의 기계적 성질에 미치는 영향에 대해서도 검토하였다. 그 결과, two fiber fragmentation시험에서 계면전단강도는 수분흡수량 및 섬유직경이 클수록 작게 나타났으며, sizing한 것이 desizing한 것보다 크게 나타났다. 또 수분흡습에 의해 감소되었던 계면전단강도는 건조에 의해서 처음의 값의 약 50-60%까지 회복됨을 나타내었다. 그리고 일방향 복합재료의 인장강도는 수분흡수량이 증가함에 따라 현저히 감소함을 보였다.

• Journal of Biosystems Engineering
• /
• v.2 no.2
• /
• pp.1-14
• /
• 1977

현재 선진국에서 널리 이용되고있는 곡물의 화력건조는 곡물의 품질을 손상시킬 뿐만 아니라 손실을 증가시키고 있다. 화력에 의한 건조는 또한 연료의 절약면에서 볼 때 역시 문제점을 내포하고있다.l 이러한 문제점들을 해결하기 위하여 근래에는 실리카 젤과 같은 흡습성의 건조제를 사용한 곡물의 건조 실험이 진행 중에 있으며 좋은 결과를 보여주고 있다. 실리카겔은 그 자체무게의 40% 까지 동적 및 정적하에서 수분을 흡수하는 성질을 가지고 있으며 일단 포화상태가 되면 수천번 재생이 가능하다. 본 연구에서는 이와같은 실리카텍의 재생실험을 일차적으로 실내에서 공기의 온도를 일정하게 한 상태에서 실시하였으며 일반적으로 실리카 젤은 $300^{\circ}F$에서 완전재생이 가능하나 본 실험에서 사용된 재생온도는 평면식 태양열 집열기로부터 얻을 수 있는 $150^{\circ}F$ 내외에서 시도하였다. 본실험과 병행하여 건조중 공기와 실리카 젤의 에너지 및 질량변화에 따른 이론식을 만들어 주어진 여러 가지 조건에 대하여 4개의 미분방정식을 컴퓨터에 의하여 해결하였으며 건조(재생) 시간에 따른 공기의 온도와 흡습 및 실리카 젤의 함수량을 구하였다. 위의 이론적인 분석결과는 후에 태양열집열기를 이용한 재생실험을 분석하는데 적용될 것이다. 본 연구결과를 요약하면 다음과 같다. 1. 본 연구에서 유도한 이론식은 실리카 젤의 재생온도를 만족스럽게 표시하였으며 재생시간에 따른 공기의 온도와 흡습 및 실리카 젤의 함수량변화의 이론치는 실험치와 근사하였다. 2. 이론치와 실험치를 일치시키기위하여 흡착온도에서 산출된 열 및 질량 전달계수를 1/5로 조정 사용하였다. 3. 실리카 젤은 $120^{\circ}F$에서 9 %, $180^{\circ}F$에서 1% 내외로 재생이 가능하였다. 4. 본 연구에서 유도된 이론적 분석방법은 다른 여러 가지 형태의 물질 및 건조 또는 냉각 과정을 분석하는데 사용될 수 있다.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.2
• /
• pp.33-39
• /
• 2010

The moisture absorption properties such as diffusion coefficient and moisture content ratio of liquid type epoxy resin systems with the filler were investigated. Bisphenol A type and Bisphenol F type epoxy resin, Kayahard MCD as hardener and 2-methylimidazole as catalyst were used in these epoxy resin systems. The nano-sized spherical type fused silica as filler were used in order to study the moisture absorption properties of these liquid type epoxy encapsulant according to the change of filler size. The temperature of glass transition (Tg) of these epoxy resin systems was measured using Dynamic Scanning Calorimeter (DSC), and the moisture absorption properties of these epoxy resin systems according to the change of time were observed at $85^{\circ}C$ and 85% relative humidity condition using a thermo-hygrostat. The diffusion coefficients in these systems were calculated in terms of modified Crank equation based on Ficks' law. An increase of Tg and diffusion coefficient with filler size in these systems can be observed, which are attributed to the increase of free volume with Tg. The change of maximum moisture absorption ratio according to the filler size and filler content cannot be observed; however, the diffusion coefficients of these systems decreased with filler content. The diffusion via free volume is dominant in the epoxy resin systems with low nano-sized filler content; however, the diffusion with the interaction of absorption according the increase of the filler surface area is dominant in the liquid type epoxy encapsulant with high nano-sized filler content.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.46-53
• /
• 1994

This study was conducted to investigate a feasibility of manufacturing wood fiber thermoplastic composites and to evaluate their mechanical properties. Wood fiber as a potential reinforcing filler was compounded with two thermoplastics (polypropylene and high density polyethylene) in high intensity thermokinetic plastic mixer aided with a wetting agent. It was found that wood fiber thermoplastic composites could be manufactured by injection molding process. The tensile and flexural strength of injection molded specimens were improved greatly with increasing wood fiber concentration. Tensile and flexural modulus increased proportionately with wood fiber concentration. Wood fiber provided reinforcement with thermoplastics in terms of strength and modulus. However, the percent elongation at break and energy to break were reduced with increasing wood fiber loadings. Impact strength also showed similar trend.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.2
• /
• pp.3-11
• /
• 1982

In order to investigate the annual mean equilibrium moisture content(EMC), the equilibrium moisture content investigated were the desorbed and adsorbed equilibrium moisture content with two end-matched samples for red pine (Pinus densiflora S. et Z.), Douglas fir (Pseadotsuga menziesii Franco), oak (Quercus mongolica Fischer) and red lauan (Shorea spp.) in instrument screen at forest experiment station located in Seoul, Chuncheon, Daejeon, Kyungju, Jinju and Gwangju area for four years (1970. 1 - 1973. 12). The results summarized were as follows. 1. The annual mean desorbed equilibrium moisture content of red pine, Douglar fir, oak and red lauan were 14.8, 13.7, 14.0 and 14.2 percent respectively and higher than the annual mean adsorbed equilibrium moisture content of those species. 2. The annual mean desorbed - and adsorbed equilibrium moisture content in central areas (Seoul, Chuncheon, Daejeon) were higher than those in southern areas (Kyungju, Jinju, Gwangju). 3. On the whole, the monthly mean desorbed - and adsorbed equilibrium moisture content were lowest in April and highest in August though difference of month in areas. 4. Average and range of annual national equilibrium moisture content was 12.3 ~ 14.2 ~ 15.7 percent for desorbed equilibrium moisture content and 11.3 ~ 13.2 ~ 14.7 percent for adsorbed equilibrium moisture content and 12.0 ~ 14.1 ~ 16.4 percent for calculated equilibrium moisture content based on tempera ture and humidity.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.109-117
• /
• 1982

In order to investigate the annual mean equilibrium moisture content (EMC), the equilibrium moisture content investigated were the desorbed - and adsorbed equilibrium moisture content with two end-matched samples for red pine (Pinus densiflora S. et Z.), Douglas fir (Pseadotsuga menziesii Franco), oak (Quercus mongolica Fischer) and red lauan (Shorea spp.) in instrument screen at forest experiment station located in Seoul, Chuncheon, Daejeon, Kyungju, Jinju and Gwangju area for four years (1970. 1 - 1973. 12). The results summarized were as follows. 1. The annual mean desorbed equilibrium moisture content of red pine, Douglar fir, oak and red lauan were 14.8, 13.7, 14.0 and 14.2 percent respectively and higher than the annual mean adsorbed equilibrium moisture content of those species. 2. The annual mean desorbed - and adsorbed equilibrium moisture content in central areas (Seoul, Chuncheon, Daejeon) were higher than those in southern areas (Kyungju, Jinju, Gwangju). 3. On the whole, the monthly mean desorbed - and adsorbed equilibrium moisture content were lowest in April and highest in August though difference of month in areas. 4. Average and range of annual national equilibrium moisture content was 12.3 ~ 14.2 ~ 15.7 percent for desorbed equilibrium moisture content and 11.3 ~ 13.2 ~ 14.7 percent for adsorbed equilibrium moisture content and 12.0 ~ 14.1 ~ 16.4 percent for calculated equilibrium moisture content based on tempera.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.429-437
• /
• 2015

It has been known that acetylation improves the dimensional stability of wood. Liquid phase acetylation is more popular than gas-phase acetylation for the effectiveness of weight gain of wood. In this study domestic red and Korean pine specimens were liquid phase acetylated and their physical properties, such as density, bending strength, dimensional stability etc., were investigated. Acetylation increased the average weights of red and Korean pine specimens by 10.4% and 9.2%, respectively, and their average oven-dry densities were increased by 6.9% and 4.6%, respectively. Acetylation did not influence on modulus of rupture (MOR), modulus of elasticity (MOE) and dynamic MOE (DMOE). The average percentage reduction in hygroscopicity (PRH) of red and Korean pine specimens were respectively 20.6% and 13.8%, while the average percentage reduction in water soaking (PRW) were respectively 20.0% and 8.5%. Thus it can be concluded that the liquid acetylation improved the dimensional stability of red pine specimens more than that of Korean pine specimens.