• The Magazine for Energy Service Companies
• /
• s.18
• /
• pp.18-21
• /
• 2002

국가전문행정연수원은 지난해 8월부터 올 6월까지 약 10개월에 걸쳐 기존의 노후화된 증기난방 보일러와 개별 냉방기를 흡수식 냉온수기를 통한 중앙집중식 냉난방으로 전환하는 ESCO사업을 실시해 막대한 에너지 절감 효과를 보고 있다. 총 4개 건물을 대상으로 진행된 이번 냉난방 ESCO사업은 총 사업금액이 6억2천여만원에 이르며 연간 절감되는 에너지절감금액이 약 1억4천4백만원 정도여서 앞으로 5년 10개월에 걸쳐 모든 투자비가 회수될 예정이다.

• Journal of the KSME
• /
• v.17 no.1
• /
• pp.23-27
• /
• 1977

태양열을 냉방에 이용하기 위한 시스템은 집열기,열교환기,냉동기 등으로 구성된다. 집열기는 난 방시와 마찬가지로 볼 때 냉난방을 병용하는 집열기를 사용하면 유리하다. 열교환기는 집열기에 서 수집한 열을 냉방기에 전달시키는 기능을 가지는데 용도에 따라 이것을 사용하지 않는 경우도 있다. 냉동기로는 보통 흡수식 냉동기를 사요하나 그외 개방식, 분사식 등의 냉동기도 사용된다. 그러나 분방식 냉동기는 취급은 용이하나 흡수제의 재생조건이 까다로워 높은 습기를 갖는 경우 재생온도가 역시 높아져야 하므로 우리나라의 경우에는 여름철의 습도가 높기 때문에 재생온도가 높아져야 하므로 태양열 냉방에는 부적당하다. 또 분사식 냉동기의 경우 성적계수(Coefficient of Performance) 가 다른 냉동기에 비해 낮고 증기압력이 낮으면 이것이 극히 낮아지기 때문에 태양 열 냉방에 많이 사용하지 않는다. 그래서 태양열 냉방에 있어서 냉동기는 거의 흡수식을 사용하 고 있으며, 여기에서도 주로 흡수식 냉동기를 사용한 냉방에 대하여 논하고져 한다.

• 월간 기계설비
• /
• s.258
• /
• pp.68-70
• /
• 2012

평창올림픽 빙상장에 해양심층수를 이용한 냉난방시스템 가동 방안이 추진된다. 국토해양부는 태양광이 도달하지 않는 수심 200m 아래의 해양심층수가 연중 $2^{\circ}C$ 정도를 유지하는 점을 이용해 세계 최초로 올림픽 빙상장에 한국해양연구원의 '해수냉난방시스템' 및 '해수온도차 발전' 연구개발 사업 성과를 적용한다고 밝혔다. 이번 기술이 전기에어컨이나 흡수식 냉동기 등에 적용되면 기존 시스템에 비해 에너지는 60%, 비용은 82%, 이산화탄소 배출량은 64% 줄어들게 된다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.3
• /
• pp.33-36
• /
• 2004

냉방에너지에 대한 분석과 전기냉방에 대한 가스냉방의 경제성 및 향후 가스냉방의 보급전망을 기술하였다. 가스냉방 부하 가스냉방은 80년대 중반부터 하절기 최대 전력수요 억제의 일환으로 보급이 본격화되기 시작했으며 가스 흡수식 냉방기 및 냉온수기의 공급으로 대규모 건축물의 냉난방에 대한 개념이 서서히 바뀌기 시작하였다. 92년 7월 “건축물의 냉방설비에 대한 설치 및 설계기준” 이 제정, 시행됨에 따라 일정규모 이상의 건축물에 중앙집중식 냉방설비 설치시 주간 최대 냉방부하의 60% 이상을 가스냉방 또는 축냉식으로 설치 의무화됨으로써 냉방은 물론 난방까지 겸하는 흡수식 냉온수기의 보급이 크게 증가하고 있다.(중략)

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.478-485
• /
• 2000

An experimental study of the absorption process of water vapor into lithium bromide solution was performed. For the purpose of development of high performance absorption chiller-heater utilizing Lithium Bromide solution as working fluid, the absorber is the most effective to improve the performance of an absorber because it requires the largest heat transfer area in an absorption chiller-heater system. This paper introduces bare tube and inner ribbed notched fin tube for the absorber of absorption chiller-heaters. Inner ribbed notched fin tube has about 10∼20% higher heat and mass transfer performance than bare tube conventionally used in absorbers and the it is expected to perform high heat and mass transfer. This paper will provide important information on the selection of absorber tubes in commercial absorption chill-heaters.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.11
• /
• pp.1428-1436
• /
• 2000

The absorption of vapor involves simultaneous heat and mass transfer in the vapor/liquid system. In this paper, a numerical study for vapor absorption process into LIBr-H$_2$O solution film flowing over helical absorber has been carried out. Axisymmetric cylindrical coordinate system was adopted to model the helical tube and the transport equations were solved by the finite volume method. The effects of operating conditions, such as the cooling water temperature. the system pressure, the film Reynolds number and the solution inlet concentration have been investigated in view of the absorption mass flux and the total absorption mass flux and the total absorption rate. The results for the temperature and concentration profiles, as well as the local absorption mass flux at the helical absorber are presented. It is shown that solution inlet concentration affected other than operation conditions for a mass flux.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.120-123
• /
• 2008

Refrigeration plants using absorption principles have been around for many years with initial development taking place over 100 years ago. Although the majority of absorption cycles are based on water-LiBr cycle, many applications exist where ammonia-water can be used, especially where lower temperatures are desirable. In both systems water is used as working fluid, but in quite different ways: as a solvent for the ammonia system, and as refrigerant for the lithium bromide system. This explains that the lithium bromide absorption system is strictly limited to evaporation temperatures above $0^{\circ}C$. The main industrial applications for refrigeration are in the temperature range below $0^{\circ}C$, the field for the binary system ammonia-water.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.198-202
• /
• 2008

Refrigeration plants using absorption principles have been around for many years with initial development taking place over 100 years ago. Although the majority of absorption cycles are based on water-LiBr cycle, many applications exist where ammonia-water can be used, especially where lower temperatures are desirable. In both systems water is used as working fluid, but in quite different ways: as a solvent for the ammonia system, and as refrigerant for the lithium bromide system. This explains that the lithium bromide absorption system is strictly limited to evaporation temperatures above $0^{\circ}C$. The main industrial applications for refrigeration are in the temperature range below $0^{\circ}C$, the field for the binary system ammonia-water.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.47-52
• /
• 1998

Water vapor absorption performance of four components solution ($LiBr+LiNO_3+LiC1+H_2O$) which could be substituted for commonly used $LiBr/H_2O$ solution in water cooled abosorption chiller is tested using a vertical tube absorber. Inlet solution concentration, inlet solution temperature, solution flow rate and inlet temperature of cooling water is varied as experimental parameters. The results of the experiment of water vapor absorption performance show that four components solution should have $2\%$ higher concentration for equal absorption capacity of $LiBr/H_2O$. But considering that four components solution have higher solubility than LiBr solution about $3\%$ high oncentration, four components solution ($LiBr+LiNO_3+LiC1+H_2O$) have more absorption capacity than LiBr solution in actual absorption chiller and can be applied to a small or air cooled absorption chiller.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.3 s.31
• /
• pp.112-121
• /
• 2006

The purpose of this study is to execute economical analysis for two types of office building HVAC system using LCC technique : single vs, separated HVAC(equal partition installation, unequal partition installation) system. The research method of this study includes the case analysis and questionnaire surveys. The results of this study are as follows: (1) LCCs of 3 types of HVAC system are estimated and the most economical one is investigated as single HVAC system, (2) In this case study, the single HVAC system was investigated as 34% lower in LCC during 15 years per $100m^2$ compared to equal partition installation, as 41% compared to unequal partition installation.