• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1317-1324
• /
• 2011

We propose a method operated in a vehicle to measure light absorption of particles in atmosphere. The advantage of this method is that it is insensitive to light scattering and hence can be used for the direct measurement of the light absorption coefficient without suffering from light scattering. With this method atmospheric light absorption can be measured at a time constant of 10 s. Further, our method allows for the real-time measurement of light absorption near a highway. The light absorption coefficients were high near a race track, an airport and the main gate where vehicles emitted carbonaceous particles.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.110.2-110.2
• /
• 2010

현재 상용가능한 연소전 $CO_2$ 포집 기술은 습식 스크러빙 방식으로 고온의 합성가스를 상온 수준으로 온도를 낮춘 후 $CO_2$를 포집해야 하고 포집된 $CO_2$의 압력이 낮아 재압축하여 저장소로 보내야 함에 따라 큰 폭의 열효율 손실이 불가피하다. 고온 고압에서 이산화탄소를 포집할수 있는 고체 흡수제를 이용할 경우 이산화탄소 포집 치 저장 추가에 따른 시스템 효율 저하를 최소화할 수 있다. 고체 $CO_2$ 흡수제는 서로 연결된 두 개의 유동층 반응기를 순환하면서 흡수탑에서는 합성가스 중의 $CO_2$를 흡수하고 재생탑에서는 고온의 수증기와 접촉하여 흡수된 $CO_2$를 다시 배출함으로써 재생된다. 따라서 건식 재생 $CO_2$ 흡수제는 유동층 공정에 응용가능한 물성과 함께 높은 $CO_2$ 흡수능과 빠른 반응성이 요구된다. 본 연구에서는 유동층 공정에 적합한 물성을 가진 연소전 $CO_2$ 포집용 고체 흡수제를 분무건조법으로 제조하였으며, 모사 합성가스를 이용하여 열중량분석기와 기포유동층반응기를 이용하여 $200^{\circ}C$ 흡수, $400^{\circ}C$ 재생, 압력 20 bar 조건으로 반응성을 측정하였다. 개발된 고체 $CO_2$ 흡수제는 열중량분석기에서는 반응 후 10-13 wt%의 무게증가를 나타내었고 기포유동층반응기에서는 8-10 wt%의 $CO_2$ 흡수능을 보여주었다. 특히 수증기의 함량이 10% 이상에서 높은 흡수능을 나타내어 수증기가 반응에 크게 작용하고 있음을 알 수 있었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.233-239
• /
• 2013

This study was carried out to develop the realtime evaluation system of $NH_3$ absorption efficiency with gas sensors which were installed on the inlet and outlet of lab-scale scrubber system. The $NH_3$ absorption amount, calculated by sensor outcomes for 3 hr, 6 hr, and 12 hr of absorption process, was compared with the results analysed by Indo-phenol method for the absorption solution. Even though the difference between two methods was about 20%, the correlation coefficient between the two results was very high, more than 0.99. In addition, we could find very good correlation between pH, absorption amount and reaction time. Also we could find out the breakthrough time in the middle of absorption process. With more diverse experiment in the future, we can make gas sensor system for the realtime evaluation of the odor and/or air pollution treatment efficiency.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.264-269
• /
• 2016

The present study was conducted to establish the optimal fertilization type and method for no-tillage during the first year of No-tillage (NT) and Conventional-tillage (CT) practices for soybean, using different types of fertilizers. In this experiment, the culm length and stalk diameter showed a greater response to fertilization with surface irrigation than to conventional fertilization. The fastest flowering period (July 28) occurred using chemical fertilization applied via subsurface irrigation. Comparing maturation based on growth characteristics and flowering date revealed that fertilization with subsurface irrigation was more effective for the growth of crops than other methods. Regarding yield, there was no significant difference between livestock and chemical fertilizers in subsurface irrigation, but there were significant differences between these fertilizers when using conventional fertilization methods. Based on the results, livestock fertilizer with subsurface irrigation effectively enhanced crop quantity. Nitrogen absorption of plants using subsurface irrigation was more effective than that using conventional fertilization. Regarding phosphorus absorption of plants, chemical fertilizers showed higher absorption than did livestock fertilizers for both subsurface irrigation and conventional fertilization. Unlike nitrogen, phosphorus was highly absorbed using conventional fertilization. Absorption of phosphorus and potassium were similar but phosphorus was not absorbed using livestock fertilizers applied either using subsurface irrigation or with conventional fertilization.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.102-107
• /
• 2007

A fast response $CO_2$ ($fCO_2$) analyzer for real-time measurement of carbon dioxide concentration during transient states of internal combustion engines has been developed. This analyzer uses non-dispersive infrared absorption (NDIR) technique for measuring $CO_2$ concentration and Kalman filter for removing noise components from output signals. The analyzer has good linearity, repeatability and drift with a response time of 11 ms; it is sufficiently fast to detect $CO_2$ concentration during transient states of internal combustion engines. The $fCO_2$ analyzer was used to measure transient $CO_2$ concentration of exhaust gas of the SI engine with a standard gas analyzer, and the signal of the $fCO_2$ analyzer was compared to that of the standard gas analyzer. The two concentrations were well matched during the steady state, and the $fCO_2$ analyzer could measure the variations of $CO_2$ concentration during the transient state.

• The Journal of Natural Sciences
• /
• v.9 no.1
• /
• pp.53-56
• /
• 1997

The structure of poly-$\beta$-hydroxybutyrate (PHB) in Chlorogloea fritschii was analyzed by FT-IR spectrometry under various conditions (phosphate starves or sufficient conditions). They exhibited characteristic absorption peaks for PHB, such as C=O stretching band at 1700-1800 $cm^-1$and C-H stretching bands at about 2900 $cm^-1$, however, the intensity of C-H stretching peaks, relative to the rest of the spectrum was increased under phosphate starved condition, which suggests that C. fritschii might produce another modified PHB polymer under phosphate starved condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.665-665
• /
• 2013

박막형 태양전지에서 광흡수층으로 널리 쓰이는 metal chalcogenide 화합물 중, CuInS2(CIS)은 전기적, 광학적 특성이 우수하여 널리 연구되고 있다. CIS계 태양전지 최근 동시 증발법을 이용하여 20.3%의 고효율을 기록한 바 있으나 기존 진공, 고온 기반 공정 기술은 초기 투자 비용이 높고, 고가의 희귀원소인 In 등의 원료 활용도가 떨어져 원가 절감에 있어 한계가 있다. 이에 따라 제조 비용 절감과 원료 사용 효율을 향상시키기 위해 비진공 방식을 이용한 광흡수 층 증착 공정에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 상온, 상압, 저온에서 합성이 가능한 CIS계 광흡수층을 전자 전달 및 빛 포집에 유리한 ZnO 나노구조와 응용함으로써 superstrate 구조의 박막형 태양전지를 구현하고 그 특성을 평가하였다. CIS 박막 태양전지에서 투명창층으로 쓰이는 ZnO 박막을 수열합성법으로 합성된 ZnO 나노로드 어레이로 대체하여 빛 산란 효과를 줄이고, 전하 수집 및 이동 효과를 극대화하였다. 또한 CIS 광흡수층은amine계 용매와 금속염 및 thiourea를 조합하여 저온에서 코팅 후 건조시켜 박막을 제조하였다. 각 요소 박막들의 물성을SEM, XRD, UV-transmittance 분석을 통해 살펴보았으며, 소면적 태양전지 제작을 통해 박막 구조 대비 30배 이상의 광변환효율(최고효율 3.30%)을 기록하였다.

• Journal of the Korean Chemical Society
• /
• v.60 no.1
• /
• pp.28-33
• /
• 2016

The spiropyran is a typical material having photodegradation properties in the process of photochromism. The spiropyran has been utilized in various applications such as optical switch, optical memories, and biosensor because of its remarkable stability, fast responsive time, stronger color change, and photo-induced controllability. However, the spriropyran is photodegraded by the repetitive optical irradiation. The photodegradation of spiropyran have been investigated by using UV-Visible spectroscopy, nuclear magnetic resonance (NMR), and Raman spectroscopy. Herein, the properties of spiropyran were characterized by using terahertz time-domain spectroscopy (THz-TDS) in the terahertz frequency region. In terahertz region, the measured absorbance of spiropyran was increased due to the photodegradation induced by the repetitive UV irradiation. The absorbance tendency of spiropyran in the terahertz frequency region was compared with that in the visible region, and they were completely opposite to each other.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.915-921
• /
• 2007

As a preliminary measurement of siloxanes in landfill gas(LFG), this study was conducted to determine the best suitable solvent applicable to the extraction of siloxanes in the domestic landfill using liquid-absorption method. Three solvents of n-hexane, acetone, and methanol were tested and the results obtained from GC analysis for each solvent were compared to their properties. Results showed that the resolution in the GC spectrum was the best from methanol due to the lack of overlapping of the peaks between silane and solvent. The detected siloxanes concentration were varied at maximum 2.6 times depending on the types of solvent as well as extraction velocity and impinger steps. In total, the highest concentration of siloxanes was obtained from methanol, which showed ideal pattern in the absorption of each impinger step and the least relative standard deviation. Accordingly, it is concluded that methanol is the most suitable solvent for the extraction of siloxanes in the domestic landfill. However, it is considered that solvent suitability can vary depending on the waste components and landfill record in landfills.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.516-522
• /
• 1998

In this study, a water adsorbent was synthesized by radiation grafting of acrylic acid and multifunctional monomers such as 1,2-propanediol dimethacrylate (PDMA) and 1,1,1-trimethylolethane triacrylate (TMETA) onto cellulose and its subsequent treatment with 5% NaOH. Its absorbency on $H_2O$ and 0.9 % NaCl aqueous solution was examined. The highest absorbency on water and on 0.9% NaCl aqueous solution was obtained from the addition of 0.75 vol % PDDMA and of 1.0 vol % TMETA onto acrylic acid solution, respectively. The absorbency of commercial hygienic band on water and NaCl aqueous solution was 21 g/g and 22 g/g, respectively. However, that for acrylic acid-grafted cellulose including TMETA was 298 g/g and 54 g/g, respectively.