• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.351-359
• /
• 2015

This convergence study analyzed the effectiveness of digital radiography system of copper(Cu) filter in the added filtration for the removal of lower energy radiation through dose and image evaluation. We were analyzed from April to June 2015 result of the examination. Cu filter was applied to each non, 0.1, 0.2, 0.3 mm according to change of kV and mAs and doses were evaluated. Image quality was evaluated by PSNR, MAE, MSE, CNR, SNR and qualitative analysis was performed by seven items for resolution and contrast from chest x-ray criteria of national cancer checkup. The absorbed doses with Cu were lowered by 16-88 % than non-filter but the gaps decreased as kV increased. PSNR were over 30 dB and all significant and CNR and SNR were superior with non-filter but in the qualitative analysis, there were different statistical significant according to each item. The score of 0.1 mm filter was high at pulmonary blood vessel observation and in the 0.3 mm Cu, there were no statistical signigicant except high density and full of air portion. Cu filter can improve image quality with lower radiation dose using better radiation quality and correction power at digital radiography system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.2
• /
• pp.99-106
• /
• 1987

Annealing were performed to investigate the behaviors of the residual stress remaining on the member of a steel structure. According to the fatigue test, the welding part has higher fatigue crack growth rate than the base metal part because the hardening of welding part reduce fracture toughness. However, the heat treatment decrease the hardness and increase the resistance to failure. Thus, the fatigue crack growth rate is improved and it reaches the minimum at $650^{\circ}C$. Elber' s equation includes the effect of the crack-close so that this equation provides a lower the fatigue crack growth rate than Paris-Erdogan' s equation, the Elber's curves show no significant difference to indentify the effect of the residual stress. The Pop loading along the crack length increases as the hardness goes higher. The heat treatment not only decrease the hardness, and the fatigue crack growth rate, but increase the absorption energy and fracture toughness on the member of a steel structure. As the result, the heat treatment produces the resistant ability to cracking which can reduce the degree of danger to failure.

• International Commerce and Information Review
• /
• v.14 no.2
• /
• pp.249-269
• /
• 2012

The focus of our work is to identify and understand the drivers of alliance performance so that businesses can maximize their chances of a successful alliance-an area that has received little attention in empirical modeling. Although both conceptual and applied research on alliances has increased, an empirically tested comprehensive theoretical model that explains alliance performance has yet to be developed. Using five salient perspective, namely market power theory, transaction cost theory, the resource-based view, institutional theory, real option theory, this paper attempts to provide a theoretical rationale linking motives of global alliance networks on firm's capabilities, partner's capabilities, operating structures, and performances of Korean companies. The key contribution of this study is that it paints a picture of what matters in driving alliance performance. Our work shows the complex nature of driving performance and the interplay of firm's capabilities, partner's capabilities, and operating structures for understanding alliance performances. This study has given us a small but significant step forward towards understanding the intricacies of alliance performance. We are now better able to understand the respective roles played by various alliance factors and derive insights that lead to improved alliance performance.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.221-227
• /
• 2020

In the case of complete edentulous patients, as the mandibular alveolar bone absorption progresses, the maintenance and stability of the existing dentures, which had satisfactory functions in the past, are deteriorated. Despite of the need to fabricate new dentures, they often hesitate due to physical burdens on the duration and intensity of future treatment progress due to the effects of aging and systemic diseases. In the case of these completely edentulous patients, it is necessary to consider the treatment goals that can reduce the number of visits and the adaptation period for new dentures before starting the treatment. This case is a case of producing complete dentures of elderly patients with deteriorated physical ability. In addition to producing suction dentures through preliminary and definitive closed mouth functional impression suggested by Sato, CAD / CAM technique was used to transfer occlusal functional information of existing dentures to facilitate adaptation to new dentures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1360-1364
• /
• 2010

도시유역 물순환 해석 모형(Catchment hydrologic cycle Analysis Tool, CAT)은 기존의 개념적 매개변수 기반의 집중형 수문모형과 물리적 매개변수 기반의 분포형 수문모형의 장점을 최대한 집약하여, 도시유역 개발 전/후의 장/단기적 물순환 변화특성을 정량적으로 평가하고 물순환 개선시설의 효과적인 설계를 지원하기 위한 물순환 해석 모형이다. 이 모형은 수문학적으로 균일하게 판단되는 범위를 소유역으로 분할하여 지형학적 요인에 의한 유출 특성을 객관적으로 반영할 수 있으며, 개발 공간 단위별로 침투, 증발, 지하수 흐름 등의 모의가 가능하도록 하는 링크-노드 방식으로 개발되었다. 모형의 UI(User Interface)는 사용자가 손쉽게 모형을 적용/관리하고, 여러 시나리오를 동시에 효과적으로 모의하여 분석할 수 있도록 설계되었다. 또한, 모든 입/출력 자료를 엑셀이나 텍스트 형식과 연동되도록 하여 프로젝트별 매개변수 관리가 용이하도록 개발하였다. 특히 본 모형에서는 사용자의 목적에 맞는 다양한 물순환 개선시설(침투시설, 저류지, 습지, 빗물저장시설, 리사이클 및 외부급수 등)의 구현 및 모의가 가능하도록 개발하였다. 여기서, 물순환 개선시설이란 빗물을 흡수하고 저류할 수 있는 도시녹지시설 혹은 구조물로서 도심 내의 불투수면을 저감시키고 유출수를 줄이면서 동시에 녹지를 확보하여 효과적인 물순환 기능에 영향을 미치는 시설들이다. 이러한 물순환 개선시설은 신도시 및 지역 혁신도시 개발 등의 대규모 토지이용변화가 예상되는 개발지역에 대한 평가 및 개선 기술을 제공하여 물순환 건전화를 위한 설계에 직접적으로 활용될 수 있는 큰 장점을 지니고 있다. 먼저 침투 시설은 계획침투량을 반영하며 토양으로의 침투량과 지하수로의 이동을 모의한다. 저류시설은 하도 내에 위치한 online 저류지와 하도 외에 위치한 offline 저류지로 구분하고 저류지 수면의 증발량과 취수량을 고려하며, 방류구를 통한 방류량을 반영하였다. offline 저류지의 경우는 하도 내의 흐름의 규모에 따라서 일정량을 넘는 경우만 offline 저류지로 유입될 수 있는 양을 산정하도록 하였으며 하류 하천으로의 방류를 반영하여 홍수 후에 저류지가 비워지도록 하였다. 유역 내의 습지는 식생과 수면에서의 증발산을 반영하였다. 습지의 저류능력을 넘는 양은 월류되어 하류로 유출되며, 방류구를 통한 방류량을 반영하였다. 빗물저장시설의 경우는 초기우수와 같은 일정량 이하의 유입량과 시설용량을 초과하는 양은 방류하도록 하였고, 물 사용량을 반영하였다. 또한, 본 모형에서는 하천 내에서 취수하여 유역으로 공급할 수 있도록 리사이클 처리노드를 계획하였다. 리사이클은 용수 이용 목적에 따라 필요지역으로 공급되는 것으로 하였으며, 하천유지용수의 목적으로 취수되어 상류 혹은 하류의 임의 지역으로 공급되는 것을 포함하였다. 또한, 유역외부에 광역으로 급수되는 공급량도 반영하도록 하였다.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.263-271
• /
• 2005

HPFRCC(High Performance Fiber Reinforced Cementitious Composite) is a class of FRCCs(Fiber Reinforced Cementitious Composites) that exhibit multiple cracking. Multiple cracking leads to improvement in properties such as ductility, toughness, fracture energy, strain hardening, strain capacity, and deformation capacity under tension, compression, and bending. These improved properties of HPFRCCs have triggered unique and versatile structural applications, including damage reduction, damage tolerance, energy absorption, crack distribution, deformation compatibility, and delamination resistance. These mechanical properties of HPFRCCs become different from the kinds and shapes of used fiber, and it is known that the effective size of fiber in macro crack is different from that in micro crack. This paper reports an experimental findings on the mechanical properties of HPFRCCs reinforced with the micro fiber(PP50, PVA100 and PVA200) and macro fiber(PVA660, SF500). Uniaxial compressive tests and three point bending tests are carried out in order to compare with the mechanical properties of HPFRCCs reinforced with micro fibers or hybrid fibers such as compressive strength, ultimate bending stress, toughness, deformation capacity and crack pattern under bending, etc.,

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.111-116
• /
• 1988

The aquatic plants were cultivated in pots containing pig waste water, adjusted to three levels of $NH_4-N$ concentration 50, 100 and 200ppm. The aquatic plants were Eichhornia crassipes solms-laub, Monochoria korsakowii Regel et maack, Zizania caduciflora, Typha orientalis, Acorus asiaticus, Cyperus exaltaus, Colocasia antiquorum var. Yield, content and amount of nitrogen and phosphorus absorped by plants, and growth status were investigated. The results obtained are as follows. 1. The content and removal amount of nitrogen and phosphrus by plants were the highest in Eichhornia crassipes solms-laub. 2. Yield of dry matter in plants in 100ppm $NH_4-N$ was in the order of Eichhornia crassipes solms-laub>Zizania caduciflora>Typha orientalis>Monochoria korsakowii Regel et maack>Acorus asiaticus. 3. The removal amount of nitrogen by plants in the 100ppm $NH_4-N$ was in the order of Eichhornia crassipes solms-laub>Zizania caduciflora>Monochoria korsakowii Regel et maack>Typha orientalis>Acorus asiaticus>Colocasia antiquorum var>Cyperus exaltatus. Removal amount of phosphorus was in the order of Eichhornia cras sipes solms-laub>Monochoria korsakowii Regel et maack>Zizania caducilora>Typha orientalis>Acorus asiaticus> Cyperus exaltatus>Colocasia antiquorum var. 4. Concentration causing growth damage was 200ppm of $NH_4-N$ in Eichhornia crassipes solms-laub, Zizania caduciflora and Typha orientalis and 100ppm in Monochoria korsakowii Regel et maack and Acorus asiaticus. 5. Nitrogen content was the highest in leaf and phosphorus content was the highest in float of the water hyacinth. 6. The number of panicles of the water hyacinth increased by 752 pieces and dry matters were about 5,000kg/l0a during one year.

• Applied Biological Chemistry
• /
• v.41 no.7
• /
• pp.516-521
• /
• 1998

Solubility patterns and gelatinization properties of two waxy rice starches, Sinsunchalbyeo and Hwasunchalbyeo, were investigated. Shapes of all starch granules were round and polygonal, and their X-ray diffraction patterns were all A type. Amylose content and water binding capacity of Sinsunchalbyeo were similar to those of Hwasunchalbyeo. The swelling powers and solubilities of two starches were increased with increasing temperature in range of $65{\sim}95^{\circ}C$, and those of Hwasunchalbyeo was higher. Iodine affinities of soluble fractions in Sinsunchalbyeo starch were higher than those in Hwasunchalbyeo at the same temperature and both were increased with increasing temperature. λmax of soluble fraction of Sinsunchalbyeo starch was highest at $75^{\circ}C$ of heating temperature. The transmittance of starch suspensions were increased rapidly at $60{\sim}65^{\circ}C$. By Rapid Visco Analyzer, initial gelatinization temperature of Sinsunchalbyeo was $67.2^{\circ}C$, and that of Hwasunchalbyeo was $68.2^{\circ}C$. In DSC analysis, onset temperature for gelatinization of Sinsunchalbyeo and Hwasunchalbyeo were $61.3^{\circ}C\;and\;62.9^{\circ}C$, respectively.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.79-89
• /
• 2012

This study was conducted to investigate the chlorophyll contents, photosynthetic characteristics, chlorophyll fluorescence, and growth performance of Parasenecio firmus under changing light environment. Parasenecio firmus was grown under non-treated (full sunlight) and three different shading conditions (88~93%, 65~75% and 45%~55% of full sunlight) for the experiment. Total chlorophyll content, photochemical efficiency (Fv/Fm), T/R ratio, specific leaf area (SLA), leaf area ratio (LAR), and leaf weight ratio (LWR) were increased with increasing shading level, but decreased dark respiration. Therefore, light absorption and light utilization efficiency were improved under the low intensity light. Plants under 65~75% of full sunlight had best maximum photosynthetic rate and net apparent quantum yield in May. On the other hand, the non-treated plants had lower maximum photosynthetic rate, photochemical efficiency, and chlorophyll content than the treated ones. Parasenecio firmus considered to be a sciophyte, is fairly sensitive to high intensity light. If 88-93% of full sunlight lasts for a long period, photosynthetic capacity will be sharply decreased, though limiting light. These results suggest that growth of Parasenecio firmus adapted to 65~75% of full sunlight.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.3
• /
• pp.87-99
• /
• 2009

We evaluated modified Soil-Plant-Atmosphere model's performance to simulate the seasonal variation of net ecosystem exchange (NEE) of carbon and examined the critical controlling mechanism on carbon exchange using the model over a deciduous forest at Gwangnung in 2006. The modified Soil-Plant-Atmosphere (mSPA) model was calibrated to capture the mean NEE during the daytime (1000-1400 LST) and used to simulate gross primary productivity (GPP). Ecosystem respiration ($R_e$) has been estimated using an empirical formula developed at this site. The simulation results indicated that the daytime mean stomatal conductance was highly correlated with daily insolation in the summer. Low stomatal conductance in high insolation occurred on the days with low temperature rather than with high vapor pressure deficit. It suggests that the forest rarely experienced water stress in the summer of 2006. The model captured the observed bimodal seasonal variation with a mid-season depression of carbon uptake. The model estimates of annual GPP, $R_e$ and NEE were $964\;gC\;m^{-2}\;yr^{-1}$, $733\;gC\;m^{-2}\;yr^{-1}$, and $-231\;gCm\;^{-2}\;yr^{-1}$, respectively. Compared to the observed annual NEE, the modeled estimates showed more carbon uptake by about $140\;gC\;m^{-2}\;yr^{-1}$. The uncertainty of the estimate of annual NEE in a complex terrain is discussed.