• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 2부
• /
• pp.525-528
• /
• 2011

1400cc급 발전용 엔진 트로틀 바디의 최적화 및 성능 향상을 위하여 유동해석을 수행하였다. 베르누이 정리를 기본으로, 성능을 발휘하는 주요 설계인자인 트로틀 바디 내부의 트로틀 밸브 각도 및 흡기부 곡률 등을 설계 변수로 유동해석을 수행하였다. 벤튜리관 흡입부의 곡률을 증가시켜 트로틀 바디에서 소모되는 흡기저항을 줄였다. 감소된 흡기저항은 펌핑로스를 저감하여 연비향상에 도움이 될 것으로 기대된다. 결과적으로 해석결과 분석을 통하여 최적화된 모델을 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2186-2191
• /
• 2003

This study is to investigate the effects of water induction through the air intake system on the characteristics of combustion and exhaust emissions in diesel engine. The effects of water induction through the air intake port were considered in IDI diesel engine in this study. The formation of NOx was significantly suppressed by decreasing the gas peak temperature during the initial combustion process because the water play a role as a heat sink during evaporating in the combustion chamber, but the smoke was slightly increased with increased water amount. Also, NOx significantly decreased with increase in water amount. A simultaneous reduction in smoke and NOx emissions can be obtained when water is injected into the combustion chamber by retarding the fuel injection timing more than without water injection.

• 오토저널
• /
• 제9권4호
• /
• pp.15-22
• /
• 1987

이상 최근 10년 사이 현저하게 보여준 엔진관계의 신기술과 그 배경 등을 돌아 보았을 때 발전하 는 가운데 특히 4륜차용 2사이클 엔진의 몰락이나 엔진의 주요 부품인 기화기의 쇠태는 그 어느 것이나 시대의 요구에 대한 기술의 한께 혹은 신기술의 개발 템포에 추종키 여려웠던 때문인 것 으로 생각된다. 2사이클 엔진은 비출력이 높고 밸브기구가 없어서 구조가 간단한 등의 장점이 있는 반면 배출가스대책(특히 HC), 경부하시의 부정연소 등의 문제를 가지고 있어 4륜차용으로 서는 배출가스규제를 계기로 SAAB(스웨덴), DKW(서독)의 2사이클 엔진이 자취를 감추게 되었 고 현재 남아있는 것은 일본의 경트럭용 엔진에 지나지 않는다. 또 기화기에 대해서도 배출가 스규제에 대한 대응에 밀려 공연비의 제어성, 고도에 대한 보정성, 내열신뢰성, 제어성, 고도에 대한 보정성, 내열신뢰성, 운전성 등의 요구에 엄해진 반면 흡기포트내(PI), 혹은 흡기관 중양부 내(SPI) 가솔린분사방식에 눌려서 가변벤투리식 등도 미국(1982), 일본(1983)에서 발표되었으나 1985년형의 미국차 엔진에는 기화기의 정착율이 50%에 지나지 않는등승용차용 분야에서는 그 사용이 점차 줄어두는 추세에 있다.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1736-1743
• /
• 1992

본 연구에서는 기화기부착 4행정 4기통 전기점화기관을 사용하여 흡기관내 액 막흐름에 의한 연료의 불균일화가 기관의 연소특성과 배기특성에 미치는 영향을 규명 하는데 궁극적인 목적을 두고 우선, 연소특성을 해석하기 위하여 비교적 고가인 연소 해석 시스템을 개발하는데 1차적인 목적으로 하였으며, 시험제작한 연소해석 시스템으 로 액막흐름의 가시화 및 배기가스 농도측정과 지압선도 해석을 행하여 구조적으로 대 칭인 1번과 4번 실린더의 연소특성과 배기특성을 비교 검토하였다.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1756-1762
• /
• 2002

To effectively meet current regulations on the exhaust emissions of diesel engine required to control the deterioration of air pollution in the whole world, this study is to investigate the effects of water induction through the air intake system on the characteristics of combustion and exhaust emissions in IDI diesel engine. A method fur supplying water through the air intake system to reduce the exhaust emissions has been considered with other methods such as water introduction in the form of water-in-fuel emulsion or water injection directly into the combustion chamber, but it has not been studied about the effects of water on the combustion concepts and the characteristics of exhaust emissions in detail until now. In this study, the formation of NOx was significantly suppressed by decreasing the gas peak temperature during the initial combustion process because the water play a role as a heat sink during evaporating in the combustion chamber, but the smoke was slightly increased by increasing water amount.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.19-25
• /
• 2005

Empirical experiments have been undertaken to investigate the effects of Intake Pulsating Flow on volumetric efficiency in a diesel engine. Waves occurs in the manifolds of engine owing to the periodic nature of the induction and exhaust processes caused by piston motion. During induction process, as waves travel both directions, they are reflected and interacted each other and pressure waves are transmitted through it. Hence, the flow become more complex and unsteady flow. These pressure waves act upon intake pulsating flow and affects on volumetric efficiency. In this paper the effects of change in length of induction pipes and wide range of engine speed on volumetric efficiency was examined and evaluated. It was found that volumetric efficiency was affected by intake pulsating flow with engine speed and the pipe length. The results obtained were considered by adopting a theory of wave action.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.175-182
• /
• 1997

The purpose of this study is to investigate the effects of intake manifold shapes to improve the engine performance in a 3-cylinder LPG engine with a closed loop fuel supply system. To know the flow resistance of intake manifolds with shape, the intake negative pressure of each runner in intake manifolds were measured by using the digital pressure meter at each driving condition. And, the engine torque and power have been measured with an engine dynamometer while adjusting the optimal fuel consumption ratio with a solenoid driver. As 속 results form this experiment, the torque characteris- tics were more improved with the plenum chamber(B type intake manifold) than with the banana type(A type intake manifold). The torque characteristics were improved at mid-engine speed(rpm) range as the inner diameter of the intake manifold became smaller. And also the optimum volume among the examined plenum chamber volume was 0.74 times(590cc) the displacement of the test engine.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.1921-1930
• /
• 1996

To design an optimum engine intake system, a flow model for the intake manifold was developed by the finite difference method. The flow in the intake manifold was one-dimensional, and the finite difference equations were derived from governing equations of flow, continuity, momentum and energy. The thermodynamic properties of the cylinder were found by the first law of thermodynamics, and the boundary conditions were formulated using steady flow model. By comparing the calculated results with experimental data, the appropriate boundary conditions and convergence limits for the flow model were established. From this model, the optimum manifold lengths at different engine operating conditions were investigated. The optimum manifold length became shorter when the engine speeds were increased. The effect of intake valve timings on inlet air mass was also studied by this model. Advancing intake valve opening decreased inlet air mass slightly, and the optimum intake valve closing was found. The difference in inlet air mass between cylinders was very small in this engine.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.963-970
• /
• 1987

본 연구에서는 LPG와 같은 기체연료를 디이젤기관의 흡기관에 소량 흡입시키 는 방법을 이용해서 비교적 간단히 흑연을 저감시킬 수 있는 대안을 검토한 것으로서, 기관사용자에게는 열효율이 향상되고 연료소비율이 저하되는 등의 이점이 있다. 또 이 방법을 기관의 부하나 회전속도의 변동에 따라 유효하게 이용할 수 있는 수법과 문 제점에 대해서도 검토하여 보았다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.628-636
• /
• 2005

In this paper. the effects of a WI(Water Injection) in the intake pipe for a 4-cylinder Dl(Direct Injection) diesel engine are investigated experimentally, The WI system was controlled by the duty cycle from the intake manifold's temperature and MAF(Manifold Air Flow) First. effect of EGR on NOx reduction was investigated. Then WI system was applied to reduce NOx As the results. we can make the NOx map and visualize the NOx results by variation of engine speed and engine load It was known that effect of WI system on NOx reduction without the EGR was better than the with EGR base engine except of low load and speed condition.