• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.428-431
• /
• 2002

Yard cranes are very useful equipments for handling of heavy containers. But rope-driven yard cranes must have a little of sway and skew motion because ropes are passive mechanical device. So many researches have been concentrated on anti-sway algorithm controlling trolley speed. But control algorithm of trolley speed is not practical in windy weather. In this paper, we are going to propose a new structure for anti-sway. This structure uses aux. ropes. The control strategy with auxiliary rope is very useful to sway control of yard crane because rope length is shorter than quay-side container cranes. In this paper, we derive equations of motion of trolley system which have anti-sway controller to use auxiliary rope. And main schemes are introduced and explained briefly.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.49-50
• /
• 2017

야외에서 촬영 된 VR(Virtual Reality) 비디오는 의도하지 않은 흔들림을 동반한다. 흔들림을 포함한 VR 비디오는 사용자에게 시각적 피로감을 주고 몰입도를 저하시키기 때문에 VR 비디오의 흔들림을 제거하는 기술은 중요하다. 본 논문에서는 촬영 과정에서 흔들림이 발생한 VR 비디오 신호를 스티칭 단계 이전에 흔들림 보정하여 안정된 $360^{\circ}$ 비디오를 얻을 수 있는 알고리즘을 제안한다.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.58-62
• /
• 2017

There is a growing need for seismic resistance design. But it is controversial that standards of sway brace device in non-structural elements for buildings like pump waterway is vary widely. Therefore, in this study to get a valid range of sway brace device in seismic resistance design, using load test of sway brace device. As a result, load of safe range from 0 to 18.5 kN and under 29.4 kN, no structural fault of sway brace device. And using internet of things get a data of seismic resistance design from sensor node like accelerometer, GPS, tilt sensor and temperature sensor through steps of sampling and prediction. These results will be acceptable for monitoring system for seismic resistance in non-structural elements.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.53-64
• /
• 2001

The gain-scheduling control technique is vary useful in the control problem incorporating time varying parameters which can be measured in real time. Based on these facts, in this paper the sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But, in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying inertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we assume that an plant parameter is varying and apply the gain-scheduling control technique design the anti-swing motion control system for the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the simulation result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1683-1693
• /
• 1997

In this paper, a new nonlinear dynamic model is derived for a 2-dimensional overhead crane based on a new definition of 2-degree-of-freedom swing angle, and a new anti-swing control law is proposed for the crane. The dynamic model and control law take simultaneous travel and traverse motions of the crane into consideration. The model is first linearized for small motions of the crane load about the vertical stable equilibrium. Then the model becomes decoupled and symmetric with respect to the travel and traverse axes of the crane. From this result, a decoupled anti-swing control law is proposed based on the linearized model via the loop shaping and root locus methods. This decoupled method guarantees not only fast damping of load-swing but also zero steady state position error with optimal transient response for the 2-dimensional motion of the crane. Finally, the proposed control method is evaluated by controlling the simultaneous travel and traverse motions of a 2-dimensional prototype overhead crane. The effectiveness of the proposed control method is then proven by the experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.526-529
• /
• 2002

The development of automated container terminal has been a hot issue for recent years. It's very natural because it's very important how many containers, how soon, and how precisely a container terminal can treat. A crane treats a very heavy container, maybe, no less than 20∼40 tons, thus most cranes use ropes to take up and land containers. But rope causes the sway of a container and this phenomenon is not avoided. On the ground of this, in most case how much skillful a driver is may affect the productivity of a yard or quay crane. Thus many researches have been concentrated on the development of the control algorithm for a crane which may be useful and robust enough to drive a crane without any human driver. Authors of this paper also are interested in this kind of research but we have been much more interested for years in the development of a mechanical structure which may cause much less sway than the existing cranes do. In this paper, we may introduce the basic structure of the developed anti-sway system.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.4
• /
• pp.35-42
• /
• 2000

The sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying intertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the LMI approach and simultaneous optimization design method to design the anti-swing motion control system for the controlled plant. And the simulation result shows that the proposed control strategy is shown to be robust to disturbances like winds and initial sway motion.

• Journal of the Korean Society for Railway
• /
• v.10 no.4
• /
• pp.17-25
• /
• 2007

• 기계와재료
• /
• v.12 no.3 s.45
• /
• pp.107-122
• /
• 2000

• ICROS
• /
• v.13 no.2
• /
• pp.34-40
• /
• 2007